The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
GT 1
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
SAE/USCAR-19
Termination of coaxial cables in automotive, medical and instrumentation applications
utilizes a single motion to crimp the center conductor, shield and outer insulation.
GT 5
GT 13
GT5 Series
— Connectors for coaxial cables —
<
Several types and configurations: In-line, board mounted, combinations of
coaxial cable with signal/power, Multi-position and color/ keying variations.
>
GT 16
PO5G
GT 11
GT 14
GT 17
GT 19N
GT 2
GT 3
GT 6W
GT 7
Features
USCAR Standard titled "Square Outer Conductor (SAE/USCAR-19)" excludes Water Proof type (GT5W)
Cost efficient termination
Highly efficient and reliable single motion "Twin Crimp
RACS antenna audio/video antenna systems, CRT displays, medical and measuring instrumentation, variety of
communication equipment, office automation equipment, LAN systems.
GT 8
*
"Twin Crimp "is a registered trade mark of Hirose Electric.
27
GT 9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
GT 1
GT 13
GT 5
B
Test Data (Using 1.5D-2V Type cable)
High Frequency Characteristics (V.S.W.R.)
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1
1.0
2.0
3.0GH
Z
GT 19N
GT 17
GT 14
GT 11
PO5G
GT 16
Note:
Typical data using fully assemblied and connected GT5-1S-HU and the GT5-1PP-HU.
GT 2
B
Termination sequence
1. Strip the cable.
2. Crimp the cable to the terminal.
GT 6W
GT 3
3.5
GT 7
9.5
5
GT 10
28
GT 9
GT 8
GT 15 GT 18W GT 12
3. Insert the terminal in the housing until is fully locked.
4. Fully insert the retainer.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
GT 1
Terminals for coaxial shielded cable
21.7
GT 5
F Connector Terminals
5.8
4.6
GT 13
4.6
GT 16
Part Number
GT5-30/0.7-1.5SCF
GT5-2428/1.6-2.5SCF
GT5-30/1.6-2.9SCF
GT5-2428/1.6-2.9SCF
GT5-2022/1.6-2.9SCF
GT5-2022/F2.7-3.5SCF
CL No.
755-0065-1
755-0078-3
755-0022-9
755-0002-1
755-0071-4
755-0077-0
755-0054-5
755-0016-6
755-0012-5
755-0034-8
755-0020-3
755-0024-4
755-0036-3
Conductor Size (AWG)
#30 or equivalent
#30 or equivalent
#24 to 28 or equivalent
#24 to 28 or equivalent
#20 to 22 or equivalent
#20 to 22 or equivalent
#20 to 22 or equivalent
#30 or equivalent
Inner Insulation
Diameter
0.6 to 0.9mm
1.5 to 2.0mm
Outer
Diameter
Packaging
1.4 to 1.8mm 1,300 pcs. per reel
2.3 to 2.7mm 1,300 pcs. per reel
PO5G
1.5 to 2.0mm
2.6 to 3.4mm 1,300 pcs. per reel
GT 11
2.4 to 2.9mm
2.5 to 2.9mm
3.3 to 3.7mm 1,100 pcs. per reel
3.6 to 4.0mm 1,100 pcs. per reel
*
*
*
*
*
*
*
GT5-2022/F3.3-3.8SCF
GT5-30/3.3-5SCF
GT5-2428/F3.3-5SCF
GT5-2022/F3.3-5SCF
GT5-30/F4-5SCF
GT5-2428/F4-5SCF
GT5-2022/F4-5SCF
GT 14
#24 to 28 or equivalent
#20 to 22 or equivalent
#30 or equivalent
#24 to 28 or equivalent
#20 to 22 or equivalent
2.5 to 2.9mm
4.6 to 5.0mm 1,100 pcs. per reel
Part
Insulator
Material
PBT
Phosphor bronze
Brass
Finish
Color: Dark gray
Tin plating
3.0 to 3.6mm
4.6 to 5.0mm 1,100 pcs. per reel
Crimp terminals
Outer terminals
GT 17
Tin plating
Note: Products marked with an asterisk (*) indicate polyethylene foam insulation.
M Connector Terminals
5.8
GT 19N
23.05
GT 2
5.8
GT 3
Part Number
GT5-30/0.7-1.5PCF
GT5-30/1.6-2.9PCF
GT5-2428/1.6-2.9PCF
GT5-2022/1.6-2.9PCF
GT5-2022/F2.7-3.5PCF
CL No.
755-0017-9
755-0021-6
755-0001-9
755-0094-0
755-0076-8
755-0053-2
755-0015-3
755-0011-2
755-0033-5
755-0019-4
755-0023-1
755-0035-0
Conductor Size (AWG)
#30 or equivalent
#30 or equivalent
#24 to 28 or equivalent
#20 to 22 or equivalent
#20 to 22 or equivalent
#20 to 22 or equivalent
#30 or equivalent
#24 to 28 or equivalent
#20 to 22 or equivalent
#30 or equivalent
#24 to 28 or equivalent
#20 to 22 or equivalent
Inner Insulation
Diameter
0.6 to 0.9mm
Outer
Diameter
1.4 to 1.8mm
Packaging
900 pcs. per reel
GT 6W
1.5 to 2.0mm
2.6 to 3.4mm
900 pcs. per reel
2.4 to 2.9mm
2.5 to 2.9mm
3.3 to 3.7mm
3.6 to 4.0mm
900 pcs. per reel
GT 7
*
*
*
*
*
*
*
GT5-2022/F3.3-3.8PCF
GT5-30/F3.3-5PCF
GT5-2428/F3.3-5PCF
GT5-2022/F3.3-5PCF
GT5-30/F4-5PCF
GT5-2428/F4-5PCF
GT5-2022/F4-5PCF
900 pcs. per reel
2.5 to 2.9mm
4.6 to 5.0mm
900 pcs. per reel
Part
Insulator
Material
PBT
Brass
Brass
Finish
GT 10
Color: Dark gray
Tin plating
Tin plating
3.0 to 3.6mm
4.6 to 5.0mm
900 pcs. per reel
Crimp terminals
Outer terminals
Note:
Products marked with an asterisk (*) indicate polyethylene foam insulation.
GT 12 GT 18W GT 15
Low-insertion M Connector Terminals
5.8
23.05
5.8
GT 8
Part Number
GT5L-30/0.7-1.5PCF
GT5L-30/1.6-2.9PCF
GT5L-2428/1.6-2.9PCF
GT5L-2428/1.6-2.5PCF
HRS No.
755-0068-0
755-0067-7
755-0066-4
755-0079-6
Conductor Size (AWG)
#30 or equivalent
#30 or equivalent
Inner Insulation
Diameter
0.6 to 0.9mm
Outer
Diameter
1.4 to 1.8mm
Packaging
900 pcs. per reel
Part
Insulator
Material
PBT
Brass
Brass
Finish
Color: Dark gray
Tin plating
Tin plating
GT 9
#24 to 28 or equivalent 1.5 to 2.0mm
#24 to 28 or equivalent
2.6 to 3.4mm
900 pcs. per reel
Crimp terminals
Outer terminals
29
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
GT 1
For Single-Conductor coaxial shielded cable
F Connectors
Housings
9.6
BKeying
Configurations
GT 13
GT 5
Figure
q
Figure
w
Figure
e
GT 16
25
11.1
13
GT 11
PO5G
Figure
r
Figure
t
Figure
y
GT5-1S-HU
Figure
u
Figure
i
Figure
o
GT 14
Part Number
GT5-1S-HU
GT5-1S-HU(A)
CL No.
755-0004-7
755-0037-6
755-0038-9
755-0080-5
755-0081-8
755-0082-0
Note 1
Note 1
Note 1
Material
Color
Light gray
Brown
Green
Blue
Key polarizing Corresponding M Connector
code
Housing- In-line
Figure
q
Figure
w
Figure
e
Figure
r
Figure
t
Figure
y
Figure
u
Figure
i
Figure
o
GT5-1PP-HU
GT5-1PP-HU(A)
GT5-1PP-HU(B)
GT5-1PP-HU(C)
GT5-1PP-HU(D)
GT5-1PP-HU(E)
GT5-1PP-HU( I )
GT5-1PP-HU(J)
GT5-1PP-HU(K)
Corresponding M Connector USCAR-19
Assembly- Board Mounting
Coding
GT5-1P-DS
GT5-1P-DS(A)
GT5-1P-DS(B)
GT5-1P-DS(C)
GT5-1P-DS(D)
GT5-1P-DS(E)
GT5-1P-DS( I )
GT5-1P-DS(J)
GT5-1P-DS(K)
-
A
B
C
D
E
I
J
K
BShown
with inserted retainer.
(26.35)
GT 17
GT5-1S-HU(B)
GT5-1S-HU(C)
GT5-1S-HU(D)
GT5-1S-HU(E)
GT5-1S-HU( I )
GT5-1S-HU(J)
GT5-1S-HU(K)
PBT
Purple
Pink
Black
Cream white
Pastel orange
GT 19N
Retainer
GT 2
Terminal extraction tool: GT-PO(A), Note 1: concept only
Retainer (-Optional-Used with the housings: GT5-1S-HU,
GT5-1PP-HU, GT5N-1PP-HU, GT5H-1PP-HU)
GT 3
14.8
GT 6W
GT 10
GT 7
Part Number
GT5-1P/S-R
CL No.
755-0006-2
Material
PBT
Color
Dark gray
GT 15 GT 18W GT 12
Housing (Not requiring use of the retainer)
9.6
2.8
7.85
25
GT 8
GT5R-1S/ HU
Part Number
CL No.
755-0047-0
Material
PBT
Color
Light gray
GT5R-1S-HU
GT 9
Terminal extraction tool: GT-PO(A)
30
1.2
11.1
13
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
GT 1
BKeying
Configurations
M Connectors
Housings
30
Figure
q
13.4
Figure
w
Figure
e
14.8
GT 5
GT 13
GT 16
Mounting bracket
attachment side
Figure
r
Outside ground connection
Figure
t
Figure
y
PO5G
Figure
u
Part Number
GT5-1PP-HU
GT5-1PP-HU(A)
GT5-1PP-HU(B)
GT5-1PP-HU(C)
GT5-1PP-HU(D)
GT5-1PP-HU(E)
GT5-1PP-HU( I )
GT5-1PP-HU(J)
GT5-1PP-HU(K)
CL No.
755-0005-0
755-0039-1
755-0040-0
755-0103-9
755-0104-1
755-0105-4
Note 1
Note 1
Note 1
Corresponding F Connector
Housing
GT5-1S-HU
GT5-1S-HU(A)
GT5-1S-HU(B)
GT5-1S-HU(C)
GT5-1S-HU(D)
GT5-1S-HU(E)
GT5-1S-HU( I )
GT5-1S-HU(J)
GT5-1S-HU(K)
Color
Light Gray
Brown
Green
Blue
Purple
Pink
Black
Cream white
Pastel orange
Key polarizing USCAR-19
code
Coding
Figure
q
Figure
w
Figure
e
Figure
r
Figure
t
Figure
y
Figure
u
Figure
i
Figure
o
-
A
B
C
D
Figure
i
Figure
o
GT 11
BShown
with inserted retainer.
(31.35)
GT 14
GT 17
E
I
J
K
Part
Housing
Ground terminal
Retainer
Material
PBT
Phosphor bronze
Finish
Color: Dark gray
Tin plating
GT 19N
* Refer to pages 32 and 34 for panel brackets used with in-line connectors.
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
