SCD#QM5266
Source Control Drawing
Upscreening/Manufacturing Specification FT9128-20BJA-AMD
Title Page ................................................................................
List of Effective Pages ..............................................................
Change List .............................................................................
Definitions.................................................................................
Acronyms and Abbreviations .....................................................
Contents ..................................................................................
1
2
3
3.1
3.2
3.3
4
4.1
5
5.1
6
7
8
8.1
9
Purpose/Intro ...........................................................................
Reference Documents...............................................................
Source of Parts.........................................................................
Original Part Manufacturer.........................................................
Screening Company ..................................................................
UK Supplier ..............................................................................
Manufacturing...........................................................................
Screening………………………………………………………………..
Certificate of Conformity ............................................................
Force Technologies Certificate of Conformity ..............................
Package Description..................................................................
Traceability ...............................................................................
Component selection.................................................................
General ....................................................................................
Nuclear Hardness .....................................................................
Baseline Component…………………………………………………..
Obsolescence notice…………………………………………………..
9.1
9.2
Date iss13. 9.11.02 ……-Changes:……orig………………………………...Init……..Name MLSalmon
Date iss ………..Rev1-Changes: …………………………………………..Init……..Name …………...
Date iss…..……Rev1-Changes:……………………………………………
Date iss…..……Rev1-Changes:……………………………………………
Date iss…..……Rev1-Changes:……………………………………………
Date iss…..……Rev1-Changes:……………………………………………
1
INTRODUCTION
This document specifies the procurement details and screening requirements
In brief the part is: 16,384-bit Static Ram SRAM 2048x8bits 200nS in 24pin Ceramic DIL
A package description is given in section 6 of this document.
2
REFERENCE DOCUMENTS
Test Method Standard
Microcircuits
Sort, incoming and outgoing
Inspection procedures
MIL-STD-883
(latest issue)
Department of Defence
Washington
DC 20363-5100, USA
3
SOURCE OF PARTS
This section provides an overview of the companies involved in the manufacture, screening and supply
of the part. Original procurement of parts shall be from the address specified in section 3.3.
3.1
Original Part Manufacturer
The original part (Untested packaged) are/were produced by Advanced Micro Devices
AMD Inc
PO Box 3453
Sunnyvale
CA94088-3453
The AMD donor part number is: AM9128-20DC
3.2
Assy /Manu,/Screening Company
The above AMD parts are then assembled (if Applicable) and screened by:
Classified
Refer to section 4 for screening specifications.
3.3
UK Supplier
The assembled/screened parts shall be procured from:
Force Technologies Ltd
Ashley Court,
Henley,
Marlborough,
Wilts, UK
SN8 3RH
Tel: +44(0)1264 731200
Fax: +44(0)1264 731444
The Force Technologies part number(Ordering Code) is:
FT9128-20BJA-AMD
4.0
Manufacture
Manufacturing processes as original manufacturer…..Advanced Micro Devices
(Manufacturing processes, assembly, Screen and test equipment listings available for inspection upon
request.
.
4.1
SCREENING
The FT9128-20BJA-AMD shall be screened as specified in the table below.
All batches of parts shall be supplied with a Certificate of Conformity. The certificate of conformity shall
reference the screening specified below.
Screening
Internal visual
Temperature cycling
Constant acceleration
Visual inspection
Pre burn-in electrical
parameters
Burn-in test
Interim (post burn-in)
electrical parameters
Percentage defective
allowable (PDA) calculation
Seal
a. Fine
b. Gross
Final electrical test
-55oC
+25oC
+125oC
External Visual
Radiation latch-up
Method
Sort, Incoming and Outgoing
Inspection Procedures procedure: 05P-
00212 10
1010, test condition C
2001, test condition E (min)
Y1 orientation only
In accordance with applicable device
specification.
1015, 160 hours at 125
°
C minimum
In accordance with applicable device
specification.
5 percent
1014
Req.t
Note
N/A
100%
100%
100%
100%
100%
100%
All lots
100%
N/A
N/A
N/A
N/A
N/A
N/A
N/A
In accordance with applicable device
specification.
100%
4
2009
1020
Option
N/A
N/A
Notes:
4/
AM9128-20BJA
工业自动化与控制
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
