T-1 (3 mm) High Intensity
LED Lamps
Technical Data
HLMP-132x Series
HLMP-142x Series
HLMP-152x Series
Features
• High Intensity
• Choice of 3 Bright Colors
High Efficiency Red
Yellow
High Performance Green
• Popular T-1 Diameter
Package
• Selected Minimum
Intensities
• Narrow Viewing Angle
•
•
•
•
General Purpose Leads
Reliable and Rugged
Available on Tape and Reel
For more information,
please refer to Tape and
Reel Option Data Sheet
Description
This family of T-1 lamps is
specially designed for applica-
tions requiring higher on-axis
intensity than is achievable with a
standard lamp. The light
generated is focused to a narrow
beam to achieve this effect.
Package Dimensions
Selection Guide
Part
Number
HLMP-1320-G00xx
HLMP-1320 GH0xx
HLMP-1321
HLMP-1321-G00xx
HLMP-1321-HI0xx
HLMP-1420
HLMP-1420-F00xx
HLMP-1421
HLMP-1421-F00xx
HLMP-1421-FG0xx
HLMP-1520
HLMP-1520-E00xx
HLMP-1521
HLMP-1521-E00xx
HLMP-1521-EF0xx
Package
Description
Untinted,
Nondiffused
Tinted,
Nondiffused
Microtinted,
Nondiffused
Yellow
Tinted,
Nondiffused
Microtinted,
Nondiffused
Tinted,
Nondiffused
Green
Luminous Intensity
Iv (mcd) @ 10 mA
Min.
Max.
8.6
–
8.6
27.6
8.6
–
8.6
–
13.8
44.0
9.2
–
9.2
–
9.2
–
9.2
–
9.2
29.4
6.7
–
6.7
–
6.7
–
6.7
–
6.7
21.2
Color
High
Efficiency
Red
2
Part Numbering System
HLMP - 1 x xx - x x x xx
Mechanical Option
00: Bulk
01: Tape & Reel, Crimped Leads
02: Tape & Reel, Straight Leads
A1: Right Angle Housing, Uneven Leads
A2: Right Angle Housing, Even Leads
Color Bin Options
0: Full Color Bin Distribution
Maximum Iv Bin Options
0: Open (no max. limit)
Others: Please refer to the Iv Bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Lens Options
20: Untinted or Microtinted, Non-diffused
21: Tinted, Non-diffused
Color Options
3: GaP HER
4: GaP Yellow
5: GaP Green
Package Options
1: T-1 (3 mm)
Absolute Maximum Ratings at T
A
= 25
°
C
Parameter
Peak Forward Current
Average Forward Current
[1]
DC Current
[2]
Power Dissipation
[3]
Reverse Voltage (I
R
= 100
µA)
Transient Forward Current
[4]
(10
µsec
Pulse)
LED Junction Temperature
Operating Temperature Range
Storage Temperature Range
Lead Soldering Temperature
[1.6 mm (0.063 in.) from body]
Red
90
25
30
135
5
500
110
-55 to +100
Yellow
60
20
20
85
5
500
110
-55 to +100
Green
90
25
30
135
5
500
110
-20 to +100
-55 to +100
260°C for 5 seconds
Units
mA
mA
mA
mW
V
mA
°C
°C
Notes:
1. See Figure 5 (Red), 10 (Yellow), or 15 (Green) to establish pulsed operating conditions.
2. For Red and Green series derate linearly from 50°C at 0.5 mA/°C. For Yellow series derate linearly from 50°C at 0.2 mA/°C.
3. For Red and Green series derate power linearly from 25°C at 1.8 mW/°C. For Yellow series derate power linearly from 50°C at
1.6 mW/°C.
4. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED
die and wirebond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the
Absolute Maximum Ratings.
3
Electrical Characteristics at T
A
= 25
°
C
Symbol
I
V
Description
Luminous Intensity
Device
HLMP-
1320
1321
1420
1421
1520
1521
2θ
1
/
2
Including Angle Between
Half Luminous Intensity
Points
Peak Wavelength
All
Min.
8.6
8.6
9.2
9.2
6.7
6.7
Typ.
30
30
15
15
22
22
45
Max.
Units
mcd
mcd
mcd
Deg.
Test
Conditions
I
F
= 10 mA
(Figure 3)
I
F
= 10 mA
(Figure 8)
I
F
= 10 mA
(Figure 3)
I
F
= 10 mA
See Note 1
(Figures 6, 11, 16, 21)
Measurement
at Peak (Figure 1)
λ
PEAK
132x
142X
152X
635
583
565
40
36
28
626
585
569
90
90
500
11
15
18
290
1.9
2.0
2.1
5.0
145
500
595
2.4
2.4
2.7
nm
∆λ
1/2
Spectral Line Halfwidth
132x
142X
152X
nm
λ
d
Dominant Wavelength
132x
142X
152X
nm
See Note 2 (Figure 1)
τ
s
Speed of Response
132x
142X
152X
ns
C
Capacitance
132x
142X
152X
pF
V
F
= 0; f = 1 MHz
Rθ
J-PIN
V
F
Thermal Resistance
Forward Voltage
All
132x
142X
152X
°C/W
V
Junction to
Cathode Lead
I
F
= 10 mA
V
R
η
V
Reverse Breakdown
Voltage
Luminous Efficacy
All
132x
142X
152X
V
lumens
Watt
I
R
= 100
µA
See Note 3
Notes:
1.
θ
1
/
2
is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
2. The dominant wavelength,
λ
d
, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.
3. Radiant intensity, I
e
, in watts/steradian, may be found from the equation I
e
= l
v
/η
v
, where l
v
is the luminous intensity in candelas
and
η
v
is the luminous efficacy in lumens/watt.
4
Figure 1. Relative Intensity vs. Wavelength.
T-1 High Efficiency Red Non-Diffused
Figure 2. Forward Current vs.
Forward Voltage Characteristics.
Figure 3. Relative Luminous Intensity
vs. DC Forward Current.
Figure 4. Relative Efficiency
(Luminous Intensity per Unit
Current) vs. Peak LED Current.
Figure 5. Maximum Tolerable Peak
Current vs. Pulse Duration. (I
DC
MAX
as per MAX Ratings).
Figure 6. Relative Luminous Intensity vs. Angular Displacement.
5
T-1 Yellow Non-Diffused
Figure 7. Forward Current vs.
Forward Voltage Characteristics.
Figure 8. Relative Luminous Intensity
vs. Forward Current.
Figure 9. Relative Efficiency
(Luminous Intensity per Unit
Current) vs. Peak Current.
Figure 10. Maximum Tolerable Peak
Current vs. Pulse Duration. (I
DC
MAX
as per MAX Ratings).
Figure 11. Relative Luminous Intensity vs. Angular Displacement.
51单片机
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
