All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
inches]. Unless otherwise specified, dimensions have a tolerance of +0.13 [+.005] and angles have a tolerance of +2 .
Figures and illustrations are for identification only and are not drawn to scale.
1. INTRODUCTION
This specification covers the requirements for application of Modular Jacks designed to be mounted to a
printed circuit (pc) board. The jacks are available as unshielded, shielded, and filtered designs to accommodate
specific application requirements. There are 4 position handset jacks and there are 4, 6, 8, and 10 position line
jacks. This specification pertains to all shielded and unshielded jacks with top and side entry ports, and with
single or multiple ports.
When corresponding with TE Personnel, use the terminology provided on this specification to help facilitate
assistance. Basic terms and features of components are provided in Figure 1.
Unshielded
Jack
Housing
Contact
1 Port
(Ref)
Locking
Rib
Bifurcated Boardlock
(Mounting Leg)
Top--Entry Feed--Through Jack
With Panel Stop
Flange
Flangeless Top--Entry Bridging
Jack Without Panel Stop
Single Port Top--Entry
Solid Post Guide Pin
(Round Mounting Leg)
Flanged Side--Entry Jack
Without Panel Stop
Shielded
Jack
Panel Stop
Flangeless Side--Entry
Jack With Panel Stop
2 Ports
(Ref)
Multi--Port Side--Entry
Low
Profile
(Ref)
Standoff
Shield Solder Tine
(PC Board Ground)
Contact
Solder Tine
Low--Profile Side--Entry
Jack With Panel Stop
Solid Post Boardlock
(Star-- Type Mounting Leg )
Low--Profile Side--Entry Jacks
Without Panel Stop
Low--Profile Side--Entry
Jack With Panel Stop
Typical Modular Jack Designs
Figure 1
2014 TE Connectivity family of companies
This controlled document is subject to change.
TOOLING ASSISTANCE CENTER 1--800--722--1111
All Rights Reserved
For latest revision and Regional Customer Service,
PRODUCT INFORMATION 1--800--522--6752
*Trademark
visit our website at
www.te.com
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
1
of 14
LOC B
114- 2048
2. REFERENCE MATERIAL
2.1. Revision Summary
This paragraph is dedicated to a revision summary of changes and additions since the previous release of this
application specification. The following changes were made for this revision:
Changed dimension in Shielded 8 Position Jacks in Figure 4
2.2. Customer Assistance
Reference Part Number 520250 and Product Code 1055 identify the pc board mounted modular jacks. These
numbers are used in a service network of customer service to access tooling and product application
information. This service is provided by your local TE Representative or, after purchase, by calling the Tooling
Assistance Center or Product Information number at the bottom of page 1.
2.3. Drawings
Customer Drawings for product numbers are available from the service network. The information on the
customer drawing and this specification takes priority over any other document supplied by TE. If there is a
conflict with the information on the customer drawing and this specification call either of the customer service
ABI Research最近评选并公布了全球超高频无源和高频无源 RFID芯片的前十大制造商。 前十大超高频无源芯片制造商是： 前十大高频无源芯片制造商是： 超高频的得奖名单并不出人意外，因为实际上似乎总是前三家公司获得大订单。ABI分析家 Mike Liard称，ABI很容易就评选出 Alien、Avery,和 Raflatac为全球...[详细]
2008年7月9日，欧司朗光电半导体率先推出发光二极管光线数据文件的互联网访问平台，是全球第一家提供该类互联网资源的 LED 制造商。这些光线文件不仅描述 LED 光线的发射模式，而且还包含发射点坐标、发射方向、光线强度和波长等信息。欧司朗的互联网信息资源涵盖包括红外发光二极管 (IRED) 在内的几乎所有 LED 产品组合。透过这平台，客户们不论白天或黑夜，随时都可以获取最新的数据，这无疑为他...[详细]
单片机
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
