8-34806-2: 产品描述TERMINAL,PIDG R 16-14HD 1/4; 产品类别连接器接线终端; 文件大小323KB，共14页; 制造商TE Connectivity(泰科); 官网地址http://www.te.com; 标准

下载文档详细参数全文预览

8-34806-2在线购买

供应商	器件名称	价格	最低购买	库存
	8-34806-2	-	-	点击查看	点击购买

8-34806-2概述

TERMINAL,PIDG R 16-14HD 1/4

8-34806-2规格参数

参数名称	属性值
Brand Name	AMP
是否无铅	不含铅
是否Rohs认证	符合
厂商名称	TE Connectivity(泰科)
Reach Compliance Code	compliant
ECCN代码	EAR99
终端性别	FEMALE
端子和端子排类型	WIRE TERMINAL
线规	14 AWG
Base Number Matches	1

文档预览

下载PDF文档

全文
预览

Application Specification

Pre- Insulated Diamond Grip (PIDG*)

Terminals, Splices, and End Caps

NOTE

114-- 2157

03 MAY 11 Rev G

All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and

inches]. Unless otherwise specified, dimensions have a tolerance of +0.13 [+.005] and angles have a tolerance of +2_.

Figures and illustrations are for identification only and are not drawn to scale.

1. INTRODUCTION

This specification covers the requirements for application of PIDG terminals, splices, and end caps in various

operating environments. Each consists of a precision--formed metal wire barrel and a copper sleeve encased in

insulating material made of nylon, polyvinyl chloride (PVC) or polyvinyl fluoride (PVF

). The insulation is color

coded (solid primary color or a primary color with a color stripe) to correspond with a specific wire size or wire

size range. The terminals, splices, and end caps accept a combination of solid and stranded wire. The wire

barrel contains serrations that provide maximum contact and tensile strength after crimping the terminal, splice,

or end cap onto the wire. The terminals are available with a variety of tongue lengths and configurations; and

the terminals, splices, and end caps are available with various wire barrel lengths and diameters to

accommodate different wire sizes, wire types, and combination of wire sizes.

The terminals, splices, and end caps are available in loose piece form to be terminated with manual and

pneumatically--powered hand held tools and tape mounted to be terminated with bench mount semi--automatic

machines.

When corresponding with personnel, use the terminology provided in this specification to facilitate your

inquiries for information. Basic terms and features of this product are provided in Figure 1.

Terminal

In--Line Ring Tongue

Wire Barrel

Tongue

Copper

Sleeve

Multiple Stud Hole

Spring Spade Tongue

Insulation

Right Angle Ring Tongue

Offset Ring Tongue

Flanged Spade Tongue

Hook Tongue

In--Line Rectangular Tongue

Right--Angle Rectangular Tongue

Knife Connect/Disconnect

Figure 1 (Cont’d)

E2011

Tyco Electronics Corporation, a TE Connectivity Ltd. Company

*Trademark

TOOLING ASSISTANCE CENTER 1--800--722--1111

PRODUCT INFORMATION 1--800--522--6752

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at

www.te.com

of 14

LOC B

TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.

114- 2157

408--8082

408--9252

408--9586

408--9640

408--9816

409--1993

409--5842

409--5862

409--5878

Miniature Quick--Change Applicators (Side--Feed Type) with Air Feed

PRO--CRIMPER* III Hand Crimping Tool 58433--3

Pneumatic Crimping Heads 314269--1, 314270--3, and 314537--1

Crimp Quality Monitor Applicators for Side--Feed and End--Feed Applications

Handling of Reeled Products

AMP--TAPETRONIC* Machine 69875

AMP--O--LECTRIC* Model “G” Terminating Machine 354500--1

626 Pneumatic Tooling Assemblies 189721--[ ]

AMPOMATOR* CLS IV+ Lead--Making Machines 356500--[ ]

2.6. Standards and Publications

Military specifications provide industry test and performance requirements. Documents available which pertain

to this product are:

MIL--T 7928/1, “Terminal, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Crimp Style,

Copper, Insulated, Ring Tongue, for Thin Wall Wire, Type II, Class I for 105_C Total Conductor

Temperature”

MIL--T 7928/4, “Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Insulated, Ring

Tongue, Bell--Mounted Type II, Class I for 150_C Total Conductor Temperature”

MIL--T 7928/5, “Terminals, Lug and Splices, Conductor, Crimp Style”

MIL--T 7928/6, “Terminals, Lug and Splices, Conductor, Crimp Style, Splice, Electric, (Permanent, Type II,

Class 1) for 150_C Total Conductor Temperature”

MS 17182, “Terminal, Lug, Crimp Style, Copper, Insulated (Servo Components), Type II, Class I for 125_C

Total Conductor Temperature”

MS 25036, “Terminal, Lug, Crimp Style, Copper, Insulated, Ring Tongue, Bell Mouthed, Type II, Class 1 for

105_C Total Conductor Temperature”

MS 25274, “Cap, Electrical (Wire End, Crimp Style, Type II, Class 1) for 105_C Total Conductor

Temperature”

3. REQUIREMENTS

3.1. Limitation

These terminals and end caps are suitable for 300 volts maximum, and the splices are suitable for 600 volts

maximum.

The terminals, splices, and end caps having the following insulation can withstand the following temperature

range:

nylon --40 to 105_C [--40 to 221_F]

PVC --10 to 90_C [14 to 194_F]

PVF

--65 to 150_C [--149 to 302_F]

3.2. Storage

A. Ultraviolet Light

Prolonged exposure to ultraviolet light may deteriorate the chemical composition used in the insulation.

B. Reel Storage

Tape--mounted reeled product should be stored horizontally to prevent sagging and possible stretching or

distortion of the plastic tape which could adversely affect feeding of the product through the tooling.

C. Shelf Life

The product should remain in the shipping containers until ready for use to prevent inadvertent damage.

The product should be used on a first in, first out basis to avoid storage contamination that could adversely

affect signal transmissions.

Rev

of 14

114- 2157

NOTE

The wire conductor(s) must not be nicked, scraped, or cut during the stripping operation.

3.4. Wire Placement

The stripped wire must be inserted into the wire barrel until the wire insulation is against the wire barrel but not

inside it. The wire insulation must be inside the metal sleeve. A gap between the wire insulation and wire barrel

is allowed, but not to exceed the dimension given in Figure 3.

Transparent Insulation Window Butt Splice Shown

1.59 [.062]

Maximum Gap

Wire Barrel

Splice

Insulation

Wire Insulation May Butt Against,

But Not Enter, Wire Barrel

Metal Sleeve

Figure 3

Wire Insulation Must Be

Inside Metal Sleeve

3.5. Crimp Requirements

A. Crimp Height

The spring--back of the terminal, splice, or end cap insulation prevents an accurate direct measurement of

crimp height. However, crimping a slug of solder (60% tin and 40% lead) with a diameter slightly larger

than the conductor outside diameter can verify proper termination. The crimp height of the resulting solder

slug can be checked with a standard micrometer or comparator. The measurement must be made over

the most compressed area of the solder slug. See Figure 4.

NOTE

Some tooling with multiple crimping chambers form an embossed dot code in the terminal, splice, or end cap

insulation that indicates which crimping chamber was used. This dot code can be used as a visual inspection to ensure

that the correct wire size and crimping chamber were used.

The resilience of the splice insulation prevents accurate direct measurement of crimp height. Crimp height can be

obtained by measuring a crimped solder slug (60% tin and 40% lead) with a diameter comparable to the wire size.

The slug must be measured over the most compressed area of the slug with a standard micrometer or crimp height

comparator (refer to 408--7424 for specific instructions). The solder slug diameter and crimp height must be within the

dimensions provided in Figure 4.

NOTE

B. Wire Barrel Crimp Profile and Location

The wire barrel crimp produced by the tooling (dies, heads, hand tools, pneumatic tools, or machines)

must be either a confined crescent crimp which appears as a depressed oval shape or a flat rectangular

crimp over the center of the wire barrel. The crimp must be evenly formed. Refer to Figures 4, 5, and 11.

Crescent crimp tooling produces the crescent crimp, and TETRA--CRIMP tooling produces the flat

rectangular crimp. For a tooling--to--crimp profile cross--reference, refer to Figure 10.

C. Dot Code

The dot code on the insulation must be well formed and correspond with the wire size or color code

marking on the crimping chamber of the tooling used. See Figures 4 and 5.

D. Bellmouths

There shall be no rear bellmouth. The front bellmouth shall be evident on the top and bottom of the wire

barrel as shown in Figure 5. Also see Figure 11.

Rev

of 14

推荐资源

继电器控制的自耦变压器式交流稳压电源电路之三

DSP面临通用处理器和FPGA的更大竞争: 最近几年，信号处理功能在越来越多的应用中变得很重要,从数码相机到发动机控制器无不如此。信号处理需求的迅速增长为DSP供应商带来了滚滚红利。例如，蜂窝电话今年就将消耗数以亿计的DSP内核。 ......; ghughu DSP 与 ARM 处理器

c51能实现64位的浮点运算吗?float 32位的误差太大了！: 在单片机上做计算器的功能，需要比较高的精度，用float他只能支持到7位精度，超过7位的都给我四舍五入了，带来的误差实在太大了！我想用double双精度但sizeof发现他也是4个byte的和float一个样 ......; ngy922 嵌入式系统

晒WEBENCH设计的过程+ 9X3W LED电源方案: 本帖最后由 olive888 于 2014-6-22 17:20 编辑背景：进入21世纪以来，利用计算机设计开关电源已成为国际上电源领域的一项新技术，基于PC的各种专用软件工具已成为设计各种开关电源的强大工 ......; olive888 模拟与混合信号

材料常数B值的问题: 请教大家，材料常数B值的允许偏差ΔB/B是什么意思？...; 恰恰测试/测量

FPGA器件的在线配置方法: 摘要：介绍基于SRAM LUT结构的FPGA器件的上电配置方式；着重介绍采用计算机串口下载配置数据的方法和AT89C2051单片机、串行EEPROM组成的串行配置系统的设计方法及实现多任务电路结构中配置的方 ......; 26979746 FPGA/CPLD

别傻了（1）:必要时可以和老板争一争: 看到一些职场的小警示，感觉很不错，和大家分享一下。题目是我起的，意思就是让大家别以为有些规则可以违背，虽然公司的员工手册上讲得天花乱坠。如果你 ......; Lazy_Boy 工作这点儿事

使用VS Code进行STM32单片机开发（创建工程、编译、调试）

官方STM32 for VS Code Extension 一、环境搭建 1．下载软件（1）VS Code V1.78.2 https://code.visualstudio.com （2）STM32CubeMX V1.12.1 https://www.st.com/en/development-tools/stm32cubemx.html （3）STM32CubeCLT V1.12.1 ...[详细]
通过串口利用printf函数输出数据

　　一。printf函数格式　　printf函数具有强大的输出功能　　%表示格式化字符串输出　　目前printf支持以下格式的输出，例如：　　printf( %c ,a);输出单个字符。　　printf( %d ,a);输出十进制整数。　　printf( %f ,a);输出十进制浮点数. 　　printf( %o ,a);输出八进制数。　　printf( %s ,a);输出字符串。...[详细]
工业扫码器品牌型号那么多，该如何选择？

近年来，随着生产制造和自动化生产管理需求的增加，工业扫码器逐渐成为工业制造领域中不可缺少的一部分。然而，在众多品牌和型号之间选择一款适合的工业扫码器并不是一件容易的事情。那么，该如何选择适合自己的工业扫码器呢？首先，技术参数是我们在选择工业扫码器时需要注意的一点。通常，一款好的工业扫码器需要有高速扫描、高精度识读、广泛的扫描角度和扫描距离等方面的技术参数，同时还应具备高防护等级方可适应恶劣...[详细]
并联逆变器的含义，电流顺时针流动

并联逆变器由两个晶闸管(T1和T2)、一个电容器、中心抽头变压器和一个电感器组成。晶闸管用于提供电流通路，而电感器L用于使电流源恒定。这些晶闸管由连接在它们之间的换向电容器控制导通和关断。并联逆变器是什么意思这互补换向方法用于打开和关闭电容器。互补换向意味着当T1接通时，点火角被施加到T2，然后电容器将关断T1。确切的情况是，当T2开启且点火角施加到T1时，由于电容电压，T2将关闭。输出...[详细]
基于CPLD的LED点阵显示控制器设计

　　场可编程器件(FPGA和 CPLD )等ISP器件无须编程器，利用器件厂商提供的编程套件，采用自顶而下的模块化设计方法，使用原理图或硬件描述语言(VHDL)等方法来描述电路逻辑关系，可直接对安装在目标板上的器件编程。它易学、易用、简化了系统设计，减小了系统规模，缩短设计周期，降低了生产设计成本，从而给电子产品的设计和生产带来了革命性的变化。本文引用地址： https://www.eepw...[详细]
英伟达今天公布人形机器人“黑科技”

“你设置好日程提醒了吗？” 8月24日，英伟达机器人官方账号在社交平台上发布了一张黑色礼盒的照片，附着一张带着创始人黄仁勋签名、配文为“好好享受”的贺卡。此次预热的产品，是一款针对机器人的“新大脑”。两天前，英伟达便发布了预热视频，黄仁勋写下一张贺卡称：“好好享受你的新大脑吧！” 随后，一款人形机器人拿起礼盒上的贺卡，读了起来，这款机器人来自中国厂商傅利叶。 ...[详细]
对于纯电动汽车它是否是真的环保

近几年来，很多人都换上了新能源汽车，而这种车也确实受到了大力的追捧，也认为是未来汽车发展的方向，甚至将来会彻底地取代燃油车。但这些不过都是大家看到的表面现象，而事实上的新能源存在的问题还很多，之所以有这么多人选择了这种车，无非就是看上了国家补贴的政策，也就是说没有了这个补贴，或许这种车型也不会有如此快速的发展，但很多人都在怀疑，相比燃油车，这种车真的环保吗？电动汽车发展到现在也有百年的历史...[详细]
变电站高清智能视频监控解决方案

近几年来，随着IEC61850标准的应用和光电互感器的研发和投入使用，数字化变电站概念已在工程实践中得到应用，全国已建成一定数量的数字化变电站，数字化变电站试点工作也在开展。而我国智能电网的研究已经启动，作为电网重要组成部分，数字化变电站领域的研究和试点工作也将为智能电网的发展打下基础。数字化变电站使变电站的所有信息采集、传输、处理、输出过程由过去的模拟信息转换为数字信息，并建立与之相适应...[详细]
专为AI PC应用打造，格科推出高性能图像传感器GC5605

该产品专为AI PC应用打造，具备高分辨率、高动态、超低功耗三大特性，助力AI PC提升视频会议、高清拍摄等应用场景的影像质量；实现智能唤醒、手势控制等更智能的人机交互。 GC5606规格参数 GC5605搭载 GalaxyCell ® 2.0 工艺平台的 1.116μm 像素，针对多种拍摄环境，尤其是暗光场景，显著增强成像细节并有效降低像素暗...[详细]
基于8051内核的远程直流电源监控系统设计

1 Introduction In the mid-1960s, American scientist Maas conducted extensive experimental research on the charging process of open-cell batteries and proposed an acceptable charging curve for ...[详细]
韩国机器人巨头WIRobotics推出人形机器人

近日，韩国机器人巨头 WIRobotics 在韩国科技大学机器人创新中心 (RIH) 推出了其首款通用人形机器人 ALLEX，其设计旨在利用其像人类一样对刺激做出反应的能力来处理多项任务，它拥有 15 个自由度 (DOF)，可以实现逼真的动作和复杂的交互。此外，ALLEX 还配备了从腰部到上身的重力补偿机制，能提供 40 N的指尖力。凭借这项创新，ALLEX 可以在不消耗过多能量或承受任何机械应...[详细]
嵌入式大佬给你分析stm32串口

　　stm32作为现在嵌入式物联网单片机行业中经常要用多的技术，相信大家都有所接触，今天这篇就给大家详细的分析下有关于stm32的出口，还不是很清楚的朋友要注意看看了哦，在最后还会为大家分享有些关于stm32的视频资料便于学习参考。　　什么是串口　　UART : Universal Asynchronous Receiver/Transmitter 通用异步收发器　　USART : Uni...[详细]
一种新型的电气火灾监控报警系统应用探讨

引言　　据《中国火灾统计年鉴》显示，近十年的火灾事故中，电气火灾所占比例在30%以上，且呈逐年上升的趋势，已成为火灾的主要致灾因素，引起巨大的人财物损失。电气火灾产生的主要原因有短路、过载、接触电阻过大、静电等，其中接地性电弧短路是最危险也多发的电气火灾成因，主要是由于故障点接触不良，未被熔融而迸发出电或者电火花。而且发生电弧性短路的故障点阻抗较大，它的短路电流并不大(略大于300mA的电流...[详细]
芯对话|CBM108S085破局多通道DAC“同步+精度+低功耗”困局

一、多通道DAC技术瓶颈当前，多通道DAC技术的发展主要聚焦于两大核心难题：一方面，工业场景迫切需要‘多通道同步+高精度’的解决方案，而传统分立方案却因复杂度过高而难以满足需求，例如，在多轴机械臂控制中，需要实现8通道的纳秒级同步输出，分立DAC不仅占用大量PCB面积，还难以有效避免通道间的延迟误差；另一方面，便携式设备面临着‘低功耗’与‘高精度’之间的平衡挑战，如手持测量仪、可穿戴医...[详细]
逆变器换向分类技巧，通过设备获得

根据换向技术，可控硅整流器主要分为两种主要类型。线路换向和强制换向逆变器被普遍使用，而其他换向逆变器，即辅助换向逆变器和互补换向逆变器不被普遍使用。这里简要讨论两种主要类型。逆变器换向分类方法 1.线路换向在这些类型的逆变器中，交流电路的线电压可以通过设备获得;当电流通过时，这个装置就关闭了教员公用室体验零特性。这种换向过程被称为线换向，而根据这种原理工作的逆变器被称为线换向逆变器。...[详细]

器件捷径: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

热门器件

开源项目推荐更多

热门活动更多

热门文章更多

技术资料推荐更多