PRODUCT SUMMARY
CX20460 Power Management Integrated Circuit for GSM and
GPRS Applications
Applications
•
GSM and GPRS handsets/data modules
Description
Skyworks Power Management Integrated Circuit (PMIC) integrates
all the power supply and battery charging functions of a low
power wireless system into one package. The device is designed
for Global System for Mobile communications (GSM) and General
Packet Radio Service (GPRS) cellular handset applications. The
CX20460 PMIC is easily programmable using a two-wire serial
interface to ensure maximum flexibility for a wide variety of
designs.
The device provides the following functions:
•
Voltage switching, conversion, and regulation
•
Power management control logic
•
Charging and monitoring of system battery
•
SIM interface
The device is packaged in a 48-pin 7.0 x 7.0 mm Land Grid Array
(LGA). The LGA includes a downset paddle, which should be
connected to the board ground plane.
•
CX20460-11 with a 1.20 mm chip height (For previous designs).
•
CX20460-12 with a 1.00 mm chip height
•
CX20460-32 with a 1.00 mm chip height
The CX20460 PMIC block diagram is shown in Figure 1. The
device package is shown in Figure 2 through Figure 4.
Features
•
Power on/off control
•
Generation of system voltages from a single power source
•
Eight regulators
•
Built-in linear battery charger
•
Analog multiplexer
•
Generation of system power on reset
•
Overcurrent limiting
•
Step-up DC/DC converter
•
48-pin LGA 7.0x7.0 mm package
•
3 V and 5 V Subscriber Identity Module (SIM) support including
level shifting
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
103185C • Skyworks Proprietary and Confidential information. • Products and product information are subject to change without notice. • July 28, 2004
1
CX20460 PRODUCT SUMMARY
7x7mm RFLGA Shipping Tray
322.6 + 0.5
315.0
7.62
6.35
10x11.00 = 110.00 + 0.25
135.9
92.1
12.95
11.00
12.7
C 3.0
45 Champer
14.50
11.00
26x11.00=286.00 + 0.25
34.30
255.3
25.4
34.3
2.54
Note:
1. Trays must meet all requirements of Skyworks GP01-D228 procurement
spec for shipping tray.
2. Material shall be bakeable carbon fiber/static dissipative w/ 140
o
C
capability
3. All dimensions and tolerances in accordance with ASME Y4.5M-1994.
4. ESD-Surface resistivity shall be >/=1X10
5
~ </=1X10
12
Ohms/Square per
EIA, JEDEC, ACH Tray specification
5. All dimensions are in milimeter
Figure 3. CX20460 Shipping Tray Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
103185C • Skyworks Proprietary and Confidential information. • Products and product information are subject to change without notice. July 28, 2004
CX20460 PRODUCT SUMMARY
12.00 (P1)
0.30 + 0.05
Pin 1
B
1.55 + 0.05
4.00 (Po)
2.00 + 0.05
1.75 + 0.10
1.70 (Ko)
Section
B-B
5
7.35 (Bo)
A
A
B
7.35 (A0)
1.50 MIN.
max
Section
A-A
Notes:
1. Carrier Tapes must meet all requirements of Skyworks
GP01-D232 procurement spec for tape and reel shipping.
2. Carrier Tape shall be black and conductive polystyrene.
3. Cover tape shall be transparent conductive pressure
sensitive adhesive (PSA) material W/13.3 mm width.
4. ESD-surface resistivity shall be (/_1X10
10
Ohms/square per
EIA, JEDEC TNR specification.
5. All dimensions are in milimeter.
7 X7 mm RFLGA Carrier Tape DWG.
Figure 4. CX20460 7 X 7 mm Tape and Reel Dimensions
Ordering Information
Model Name
Power Management Integrated Circuit
Ordering Part Number
CX20460-11 (1.2 mm height – for previous designs)
CX20460-12 (1.0 mm height)
CX20460-32 (1.0 mm height)
Evaluation Kit Part Number
Copyright © 2004, Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products. These materials are provided by Skyworks as a service to its
customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials. Skyworks may
make changes to its documentation, products, specifications and product descriptions at any time, without notice. Skyworks makes no commitment to update the
information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from future changes to its documentation, products,
specifications and product descriptions.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by or under this document. Except as may be provided in Skyworks’
Terms and Conditions of Sale for such products, Skyworks assumes no liability whatsoever in association with its documentation, products, specifications and product
descriptions.
THESE MATERIALS ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED OR OTHERWISE, RELATING TO SALE AND/OR USE OF
SKYWORKS PRODUCTS INCLUDING WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-
INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. SKYWORKS FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS
OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING
SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE
OF THESE MATERIALS WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications. Skyworks’ customers using or selling Skyworks products for use in such
applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale.
The following are trademarks of Skyworks Solutions, Inc.: Skyworks™, the Skyworks logo, and Breakthrough Simplicity™. Product names or services listed in this
publication are for identification purposes only, and may be trademarks of Skyworks or other third parties. Third-party brands and names are the property of their respective
owners. Additional information, posted at www.skyworksinc.com, is incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4
July 28, 2004 • Skyworks Proprietary and Confidential information. • Products and product information are subject to change without notice. • 103185C
16.00 + 0.30
5
max
7.50 + 0.10
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
