CINTA
Connector
P R O D U C T
S P E C I F I C A T I O N
®
300PNF-BH-CR
N FEMALE BULKHEAD CONNECTOR, SOLDER INNER CONTACT
ATTACHMENT, CRIMP OUTER CONTACT ATTACHMENT, FOR
CNT-300 CABLE
Interface type
Interface mates to
Electrical
Recommended maximum operating frequency, GHz
Peak power, max, kW
Average power, max, kW @ 900 MHz
dc test maximum voltage
RF operating voltage, max, VRMS
RF high potential, max, VRMS
Inner contact resistance, milliohms (Outer)
Insulation resistance, min, Megaohms
Connector impedance, Ohms
Cable impedance, Ohms
Insertion loss, max, dB
Connector Return Loss, dB
Start
Stop
0.05 -
3.00 GHz
3.00 -
6.00 GHz
Mechanical
Customer Support Center:
From North America:
1-800-255-1479
International:
+1-708-873-2307
www.andrew.com
Return Loss
32.00
23.00
N Female
N Male
6.00
10.00
0.36
2,000.00
707.00
1,500.00
1.00 (0.25)
5,000.00
50.00
50.00
0.05
frequency(GHz)
Cable Limited
Connector Limited
Cable Limited
Connector Limited
Connector Limited
Connector Limited
This Specification Sheet is for reference only and is subject to change without notice.
Copyright © 2006 Andrew Corporation
12 September 2006
1
CINTA
Connector
P R O D U C T
S P E C I F I C A T I O N
®
300PNF-BH-CR
N FEMALE BULKHEAD CONNECTOR, SOLDER INNER CONTACT
ATTACHMENT, CRIMP OUTER CONTACT ATTACHMENT, FOR
CNT-300 CABLE
Inner attachment method
Connector weight, g
Pressurizable
Coupling nut retention force, N (lb)
Minimum coupling nut torque, N-m (lb-in)
Insertion force, N (lb)
Minimum connector retention tensile force, N (lb)
Minimum connector retention torque, N-m (lb-in)
Environmental
Moisture resistance test
Mechanical shock test
Corrosion test
Thermal shock test
Vibration test
Operating temperature range, °C
Storage temperature range, °C
Water jetting test, mated connectors
Components
Interface [Silver Plate]
Sleeve (Trimetal Plate)
Insulator
Inner Contact (Gold Plate)
Disc
Hex Nut
Lock Washer
O-Ring
Crimp Ferrule
Solder
Crimp
51.10
No
445.00 (100.04)
0.70 (6.20)
100.00 (22.48)
200.00 (44.96)
0.45 (3.98)
IEC 529, IP68
IEC 68, part 2-27
IEC 68-2-11
MIL-STD-202F, Method 107G
IEC 68, Part 2-6
-55.00°C - 85.00°C
-65.00°C - 125.00°C
IEC 529:1989,IP66
Material:
Material:
Material:
Material:
Material:
Material:
Material:
Material:
Material:
Brass
Brass
PTFE
Phosphor Bronze
PTFE
Brass
Stainless Steel
Silicone Rubber
Soft Copper
Outer attachment method
Exterior finish: Silver Plate
Exterior finish: Trimetal Plate
Exterior finish: Gold Plate
Exterior finish: Trimetal Plate
Exterior finish: Trimetal Plate
Customer Support Center:
From North America:
1-800-255-1479
International:
+1-708-873-2307
www.andrew.com
This Specification Sheet is for reference only and is subject to change without notice.
Copyright © 2006 Andrew Corporation
12 September 2006
2