®
RF360 Europe GmbH
A Qualcomm – TDK Joint Venture
SAW Components
SAW RF low loss filter
SCR
Series/type:
Ordering code:
Date:
Version:
B1636
B39162B1636U510
September 16, 2008
2.1
RF360 products mentioned within this document are offered by RF360 Europe GmbH and other subsidiaries of
RF360 Holdings Singapore Pte. Ltd. (collectively, the “RF360 Subsidiaries”). RF360 Holdings Singapore Pte. Ltd.
is a joint venture of Qualcomm Global Trading Pte. Ltd. and EPCOS AG. References in this documentation to
EPCOS AG should properly reference, and shall be read to reference, the RF360 Subsidiaries.
RF360 Europe GmbH, Anzinger Str. 13, München, Germany
© 2016 RF360 Europe GmbH and/or its affiliated companies. All rights reserved.
These materials, including the information contained herein, may be used only for informational purposes by
the customer. The RF360 Subsidiaries assume no responsibility for errors or omissions in these materials or
the information contained herein. The RF360 Subsidiaries reserve the right to make changes to the product(s)
or information contained herein without notice. The materials and information are provided on an AS IS basis,
and the RF360 Subsidiaries assume no liability and make no warranty or representation, either expressed or
implied, with respect to the materials, or any output or results based on the use, application, or evaluation of
such materials, including, without limitation, with respect to the non-infringement of trademarks, patents,
copyrights or any other intellectual property rights or other rights of third parties.
No use of this documentation or any information contained herein grants any license, whether express, implied,
by estoppel or otherwise, to any intellectual property rights, including, without limitation, to any patents owned
by QUALCOMM Incorporated or any of its subsidiaries.
Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in any manner to
others without the express written permission of RF360 Europe GmbH.
Qualcomm and Qualcomm RF360 are trademarks of Qualcomm Incorporated, registered in the United States
and other countries. RF360 is a trademark of Qualcomm Incorporated. Other product and brand names may be
trademarks or registered trademarks of their respective owners.
This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws.
Diversion contrary to U.S. and international law is strictly prohibited.
SAW Components
SAW RF low loss filter
Data Sheet
Application
s
s
s
s
B1636
1632.0 MHz
Low loss RF filter for satellite channel router
Usable passband 40.5 MHz
High rejection
200
Ω
balanced to 75
Ω
unbalanced operation
Features
s
s
s
s
s
s
s
s
Package size 3.0 x 3.0 x 1.1 mm
3
Maximum height of 1.225 mm
Package code DCC6D
RoHS compatible
Approximate weight 0.037 g
Package for
Surface Mount Technology
(SMT)
Ni, gold-plated terminals
Electrostatic Sensitive Device
(ESD)
Pin configuration
s
s
s
s
4
6
2
1, 3, 5
Input
Input
Output
Case ground
Please read
cautions and warnings and
important notes
at the end of this document.
2
September 16, 2008
SAW Components
SAW RF low loss filter
Data Sheet
Characteristics
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
T = +25 ˚C + 2˚C
Z
S
= 200
Ω
and matching network
Z
L
=
75
Ω
min.
Nominal frequency
Insertion attenuation
at 1632.0 MHz
Pass bandwidth
α
rel
< 1.0 dB
Amplitude ripple (p-p)
1608.4 ... 1655.5
Group delay ripple (p-p)
1613.6 ... 1650.3
f
N
α
0
—
2.6
3.0
—
typ.
@ 25 ˚C
1632.0
max.
—
B1636
1632.0 MHz
MHz
dB
B
1 dB
∆α
MHz
∆τ
MHz
α
rel
—
58.0
—
MHz
—
0.6
1.0
dB
—
6.0
10.0
ns
Relative attenuation (relative to
α
0
)
0.3 ... 862.0 MHz
862.0 ... 1423.9 MHz
1423.9 ... 1539.7 MHz
1724.6 ... 2000.0 MHz
2000.0 ... 2500.0 MHz
2500.0 ... 3500.0 MHz
Common Mode Rejection Ratio (CMRR)
1608.4 ... 1655.5 MHz
Input VSWR
1608.4
Output VSWR
1608.4
... 1655.5
MHz
60.0
50.0
42.0
33.0
40.0
30.0
70.0
55.0
47.0
40.0
46.0
36.0
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
20.0
29.0
—
dB
—
1.7
2.0
... 1655.5
MHz
—
1.8
2.0
Please read
cautions and warnings and
important notes
at the end of this document.
3
September 16, 2008