To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at
www.onsemi.com.
Please
email any questions regarding the system integration to
Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FAN2564 — 300mA Low V
IN
LDO for Digital Applications
April 2011
FAN2564
300mA Low V
IN
LDO for Digital Applications
Features
Input Voltage 1.65V to 3.6V
Guaranteed 300mA Output
High Initial Output Voltage Accuracy: ±1%
Fixed Output Voltage options from 1.2V to 2.8V
Very Low Dropout: 100mV at 300mA
45µA Quiescent Current at No Load
Low Output Noise of 100µV
RMS
Inrush Current Controlled to Less Than 500mA
PSRR of 60dB at 1kHz
100µs Startup Time
Stable with Ceramic Capacitors
Thermal and Short-Circuit Protection
4-bump WLCSP, 0.5mm Pitch
6-pin 2 x 2mm UMLP
Description
The FAN2564 operates from a minimum input of 1.65V
and provides outputs as low as 1.2V. Output current is
guaranteed to 300mA, making this regulator ideal for
digital loads.
The unique low input voltage capability and very low
dropout make this device an ideal post regulator to a
synchronous buck regulator. In this configuration, accu-
rate low voltage regulation is provided without the ineffi-
ciencies typically related to linear regulators.
The enable pin can be used to initiate shutdown mode,
where the operating current falls to an extremely low
10nA, typically.
The FAN2564 is designed to be stable with space-
saving ceramic capacitors as small as 0402 case size.
The FAN2564 is available in 4-bump 0.5mm pitch wafer-
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
