203098B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 7, 2015
1
DATA SHEET • SMV1276-079LF: HYPERABRUPT JUNCTION TUNING VARACTOR
Electrical and Mechanical Specifications
The absolute maximum ratings of the SMV1276-079LF varactor
are provided in Table 2. Electrical specifications are provided in
Table 3. Typical capacitance values are listed in Table 4. The
relationship between capacitance and reverse voltage is
illustrated in Figure 1.
The SPICE model for the SMV1276-079LF varactor is shown in
Figure 2 and the associated model parameters are provided in
Table 5.
Package dimensions are shown in Figure 3, and tape and reel
dimensions are provided in Figure 4.
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SMV1276-079LF varactor is rated to Moisture Sensitivity
Level 1 (MSL1) at 260
C.
It can be used for lead or lead-free
soldering. For additional information, refer to the Skyworks
Application Note,
Solder Reflow Information,
document number
200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Table 2. SMV1276-079LF Absolute Maximum Ratings (Note 1)
Parameter
Reverse voltage
Forward current
Power dissipation
Operating temperature
Storage temperature
V
R
I
F
P
DIS
T
OP
T
STG
–55
–55
Symbol
Minimum
Typical
Maximum
10
20
250
+125
+150
Units
V
mA
mW
C
C
Note 1:
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION:
Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
