The LV5681P is a multi-power supply system IC that provides four regulator outputs and two high side switches as
well as a number of protection functions including overcurrent protection, overvoltage protection and overheat
protection. It is an optimal power supply IC for car audio and car entertainment systems and similar products.
Features
•
Four regulator output systems
For microcontroller: 5.7V output voltage, 200mA maximum output current
For CD drive: 7.0V output voltage, 1300mA maximum output current
For illumination: 8 to 12V output voltage (output can be set with external resistors), 300mA maximum output
current
For audio systems: 8 to 9V output voltage (output voltage can be set with external resistors), 300mA maximum
output current
•
Two VCC-linked high side switch systems
EXT: 350mA maximum output current, 0.5V voltage difference between input and output.
ANT: 300mA maximum output current, 0.5V voltage difference between input and output.
•
Two VDD 5V-linked high side switch systems
SW5V: 200mA maximum output current, 0.2V voltage difference between input and output.
ACC (accessory voltage detection output): 100mA maximum output current, 0.2V voltage difference between
input and output.
•
Overcurrent protection function
•
Overvoltage protection function, typ 21V (excluding VDD 5V output)
•
Overheat protection function, typ 175ºC
•
On-chip accessory voltage detection circuit
•
P-channel LDMOS used for power output block
CAUTION)
The protection functions are provided in order to improve the ability of the ICs to withstand breakdown, and they are not intended to guarantee
safety when used under conditions outside the safe operating area or rated operating conditions.
Use of the ICs under any conditions exceeding the safe operating area or above the IOmax, and especially use in overcurrent protection areas or under
conditions in which they are subject to thermal protection, may reduce their reliability and result in permanent breakdown.
Semiconductor Components Industries, LLC, 2013
August, 2013
O2611 SY 20111014-S00003/D2210 SY 20101201-S00005 No.A1902-1/14
LV5681P
Specifications
Absolute Maximum Ratings
at Ta = 25°C
Parameter
Supply voltage
Peak supply voltage
Allowable Power dissipation
Conditions
VCC max
VCC peak
Pd max
See below for the waveform applied.
Independent IC
Al heat sink *
With an infinity heat sink
Junction temperature
Operating ambient temperature
Storage temperature
Tj max
Topr
Tstg
Ta
≤
25°C
Conditions
Ratings
36
50
1.5
5.6
32.5
150
-40 to +85
-55 to +150
Unit
V
V
W
W
W
°C
°C
°C
* : When the Aluminum heat sink (50mm
×
50mm
×
1.5mm) is used
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Allowable Operating range
at Ta = 25°C
Parameter
Operating supply voltage 1
Operating supply voltage 2
Conditions
VDD output, SW output, ACC output
ILM output at 10V
ILM output at 8V
Operating supply voltage 3
Operating supply voltage 4
Audio output at 9V
CD output (CD output current = 1.3A)
CD output (CD output current
≤
1A)
Ratings
7.5 to 16
12 to 16
10 to 16
10 to 16
10.5 to 16
10 to 16
Unit
V
V
V
V
V
V
Electrical Characteristics
at Ta = 25°C, VCC = 14.4V
*: All the specifications are defined based on the tests that Tj is almost equal to Ta (=25°C). To suppress the rise of Tj in the junction
temperature as much as possible, it tests by the pulse loading.
Parameter
Current drain
CTRL1 Input
Low input voltage
M1 input voltage
M2 input voltage
High input voltage
Input impedance
CTRL2 Input
Low input voltage
M input voltage
High input voltage
Input impedance
VDD 5.7V Output
*1
Output voltage 1
Output voltage 2
Output total current
Line regulation
Load regulation
Dropout voltage 1
Dropout voltage 2
Dropout voltage 3
Ripple rejection
CD Output ; CTRL2 =
⎡H⎦
VO2
IO2 = 1000mA
6.65
7.0
7.35
V
*1 : The VDD 5.7V output also supplies the output currents of SW 5.7V and ACC 5.7V. Therefore, the current supply capability of the VDD 5.7V output and its
other electrical characteristics are affected by the output statuses of SW 5.7V and ACC 5.7V.
*2 : SW 5V and ACC 5.7V are not subject to a load.
Continued on next page.
Output voltage
VO1
VO1’
Ito1
ΔV
OLN1
ΔV
OLD1
VDROP1
VDROP1’
VDROP1”
RREJ1
VIL2
VIM2
VIH2
RIH2
0
1.1
2.5
350
1.65
3.3
500
0.5
2.1
5.5
650
V
V
V
kΩ
VIL1
VIM11
VIM21
VIH1
RIH1
0
0.8
1.9
2.9
350
1.1
2.2
3.3
500
0.4
1.4
2.5
5.5
650
V
V
V
V
kΩ
Symbol
ICC
Conditions
min
VDD no load, CTRL1/2 =
⎡L/L⎦,
ACC = 0V
Ratings
typ
400
max
800
μA
Unit
The VDD 5.7V output supplies the output currents of SW 5.7V and ACC 5.7V.
IO1 = 200mA, IO7, IO8 = 0A
IO1 = 200mA, IO7 = 200mA, IO8 = 100mA
VO1
≥
5.4V, Ito1 = IO1+IO7+IO8
7.5V
<
VCC
<
16V, IO1 = 200mA *2
1mA
<
IO1
<
200mA *2
IO1 = 200mA *2
IO1 = 100mA *2
IO1+IO7+IO8 = 500mA
f = 120Hz, IO1 = 200mA *2
40
5.4
5.4
500
30
70
1.0
0.7
2.5
50
90
150
1.5
1.05
3.75
5.7
5.7
6.0
6.0
V
V
mA
mV
mV
V
V
V
dB
No.A1902-2/14
LV5681P
Continued from preceding page.
Parameter
Output current
Line regulation
Load regulation
Dropout voltage 1
Dropout voltage 2
Ripple rejection
Symbol
IO2
ΔV
OLN2
ΔV
OLD2
VDROP2
VDROP2’
RREJ2
VO2
≥
6.65V
10.5V
<
VCC
<
16V, IO2 = 1000mA
10mA
<
IO2
<
1000mA
IO2 = 1000mA
IO2 = 500mA
f = 120Hz, IO2 = 1000mA
40
Conditions
min
1300
50
100
1.0
0.5
50
100
200
1.5
0.75
Ratings
typ
max
mA
mV
mV
V
V
dB
Unit
AUDIO (8-9V) Output ; CTRL2 =
⎡M⎦
AUDIO_F pin voltage
AUDIO_F pin inflow current
AUDIO output voltage 1
AUDIO output voltage 2
AUDIO output voltage 3
AUDIO output current
Line regulation
Load regulation
Dropout voltage 1
Dropout voltage 2
Ripple rejection
VI 3
IIN3
VO3
VO3’
VO3”
IO3
ΔV
OLN3
ΔV
OLD3
VDROP3
VDROP3’
RREJ3
10V
<
VCC
<
16V, IO3 = 200mA
1mA
<
IO3
<
200mA
IO3 = 200mA
IO3 = 100mA
f = 120Hz, IO3 = 200mA
40
IO3 = 200mA, R2 = 30kΩ, R3 = 5.6kΩ *3
IO3’ = 200mA, R2 = 27kΩ, R3 = 4.7kΩ *3
IO3” = 200mA, R2 = 24kΩ, R3 = 3.9kΩ *3
1.222
-1
7.65
8.13
8.6
300
30
70
0.3
0.15
50
90
150
0.45
0.23
8.0
8.5
9.0
1.260
1.298
1
8.35
8.87
9.4
V
μA
V
V
V
mA
mV
mV
V
V
dB
ILM (8-12V) Output ; CTRL1 =
⎡M1⎦
ILM_F pin voltage
ILM output voltage 1
ILM output voltage 2
ILM output voltage 3
ILM output current
Line regulation
Load regulation
Dropout voltage 1
Dropout voltage 2
Ripple rejection
Remoto (EXT) ; CTRL1 =
⎡M2⎦
Output voltage
Output current
ANT remoto ; CTRL1 =
⎡H⎦
Output voltage
Output current
SW 5V Output ; CTRL2 =
⎡M⎦
Output voltage 1
Output voltage 2
Output current
VO7
VO7’
IO7
IO7 = 1mA, IO1, IO8 = 0A *4
IO7 = 200mA, IO1, IO8 = 0A *4
VO7
≥
4.55
VO1-0.25
VO1-0.45
200
VO1
VO1-0.2
V
V
mA
VO6
IO6
IO6 = 300mA
VO6
≥
VCC-1.0
VCC-1.0
300
VCC-0.5
V
mA
VO5
IO5
IO5 = 350mA
VO5
≥
VCC-1.0
VCC-1.0
350
VCC-0.5
V
mA
VI4
VO4
VO4’
VO4”
IO4
ΔV
OLN4
ΔV
OLD4
VDROP4
VDROP4’
RREJ4
12V
<
VCC
<
16V, IO4 = 200mA
1mA
<
IO4
<
200mA
IO4 = 200mA
IO4 = 100mA
f = 120Hz, IO4 = 200mA
40
IO4 = 200mA, R2 = 30kΩ, R3 = 5.6kΩ *3
IO4’ = 200mA, R2 = 27kΩ, R3 = 3.9kΩ *3
IO4” = 200mA, R2 = 33kΩ, R3 = 3.9kΩ *3
1.222
7.65
9.55
11.36
300
30
70
0.7
0.35
50
90
150
1.05
0.53
1.260
8.0
10.0
11.9
1.298
8.35
10.45
12.44
V
V
V
V
mA
mV
mV
V
V
dB
ACC Detection ; ACC Integration 5V output
ACC detection voltage
Hysteresis width
Input impedance
ACC output voltage 1
ACC output voltage 2
ACC output voltage
VTH8
VHIS8
ZI8
VO8
VO8’
IO8
(Pull-down resistance internal)
IO8 = 0.5mA, IO1, IO7 = 0A *4
IO8 = 100mA, IO1, IO7 = 0A *4
VO8
≥
4.55
2.75
0.2
42
VO1-0.25
VO1-0.45
100
3.0
0.3
60
VO1
VO1-0.2
3.25
0.4
78
V
V
kΩ
V
V
mA
*3 : When a component with a resistance accuracy of
±1%
is used
<Reference> When a component with a resistance accuracy of
±0.5%
is used, VO3” is 8.67V
≤
9.0V
≤
9.33V.
*4 : Since the SW 5.7V and ACC 5.7V are output from VDD 5.7V through the SW, the voltage drops by an amount equivalent to the ON resistance of the SW.
模拟电子
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
