Three-Phase Electrical
Energy Logger
Fluke 1730
Technical Data
Energy logging is now within your reach—
discover where you’re wasting energy, optimize
your facility’s energy use and reduce your bill.
The new Fluke 1730 Three-Phase Electrical Energy logger
introduces a new simplicity to discovering sources of
electrical energy waste. Discover when and where
energy in your facility is being consumed; from the
service entrance to individual circuits. Profiling energy
usage across your facility helps you identify opportunities
for energy savings, and provides you with the data you
need to act on them. The new Energy Analyze software
package allows you to compare multiple data points over
time to build a complete picture of energy usage, which
is the first step to reduce the cost of your energy bill.
•
Key measurements:
voltage, current, power,
power factor and associated values enable
energy saving strategies to be implemented.
•
Bright, color touch screen:
perform conve-
nient in-the-field analysis and data checks
with full graphical display.
•
Comprehensive logging:
all measured values
are automatically logged and can be reviewed
during logging and before downloading for on-
the-go analysis. More than 20 separate logging
sessions can be stored on the instrument.
•
Optimized user interface:
quick, guided,
graphical setup ensures you’re capturing the
right data every time, and the intelligent veri-
fication function indicates correct connections
have been made, reducing user uncertainty.
•
Complete ‘in-the-field’ setup through the
front panel:
no need to return to the workshop
for download and setup or to take a computer
to the electrical panel.
•
Wide range power:
power instrument directly
from the measured circuit eliminating the
need to find a power outlet while allowing the
instrument to be secured safely inside electri-
cal panels.
•
Two USB ports:
one for PC connection and
another for fast, simple download to standard
USB thumb drives, or other USB devices.
•
Compact size:
designed to fit in tight spaces
and panels.
•
Highest safety rating in the industry:
600 V
CAT IV/1000 V CAT III rated for use at the ser-
vice entrance and downstream.
•
Optimized measurement accessories:
flat
voltage cable and thin flexible current probes
ensure easy installation even in tight spaces.
•
Battery life:
four-hour operating time (backup
time) per charge on lithium-ion battery.
•
Security:
safeguard against theft with a
Kensington lock.
•
All new, Energy Analyze application soft-
ware:
download, analyze and automated
reporting for a complete picture of energy
saving potential.
Applications
When a piece of equipment is operated it instan-
taneously consumes a specific amount of power in
Load studies
watts (W) or kilowatts (kW). This power is accu-
Discover how much energy individual pieces of
mulated over the operating time and expressed as
equipment are consuming when they are operat-
energy consumed in kilowatt hours (kWh). Energy
ing at minimum and maximum capacity. Check
is what your electric utility charges for; there will
capacity of circuits prior to adding additional
be a standard charge from the utility per kilowatt
loads (various standards exist for this process;
hour. Utilities may have other additional charges,
in the US the NEC 220-87 is the recommended
standard). Load studies can also identify situations such as peak demand, which is the maximum
power demand over a defined period of time,
where you may be exceeding the allowable load
often 15 or 30 minutes. There may also be power
on the circuit or when an agreed peak demand
factor charges, which are based on the effects of
applies from the utility. For convenience, some
load studies simply measure current which makes the inductive or capacitive loads in the facility.
installation of the measuring equipment quick and Optimizing peak demand and power factor often
results in lower monthly electricity bills. The
easy. It is often recommended that load surveys
1730 Three Phase Electrical Energy logger has
be performed for 30 days so that all typical load
the capability to measure and characterize these
conditions are encountered during the test.
effects enabling you to analyze the results and
save money.
Energy surveys
Users often ask where measurements should be
Simplified load studies
taken for an energy survey. The answer is mul-
For situations where it’s either difficult or imprac-
tiple points within the facility. Start at the main
tical to make a voltage connection the simple load
service feeders; compare the power and energy
study feature allows users to perform a simplified
measured here with the readings from the util-
load study by measuring current only. The user
ity meter to ensure you’re receiving the correct
can enter the nominal expected voltage to create
charges. Then move downstream to the larger
loads; these should be easy to identify by the cur- a simulated power study. For accurate power
rent rating of the electrical panels downstream of and energy studies it is required to monitor both
voltage and current but this simplified method is
the service entrances. Measuring at many points
useful in certain circumstances.
will allow a full picture of energy usage across
the facility to be developed. The next ques-
tion users typically have is how long an energy
survey should last. This of course depends on the
facility, but it is recommended that you measure
for a period that matches a typical facility activ-
ity period. If the facility operates over a five day
work week with down time on the weekend, a
seven day survey will most likely capture typical
conditions. If the facility operates at a constant
level for 24 hours a day, 365 days a year, a single
day could be reasonably representative as long as
you avoid a period where there may be planned
maintenance.
To capture a full picture of the facilities energy
usage it is not necessarily required to have
measurements made simultaneously at every
consumption point in the facility. To get a compre-
hensive picture, spot measurements can be made
and then compared on a sliding time timescale.
For example, you could compare the service
entrance results from a typical Tuesday between
6:00 am and 12:00 pm with those of a larger load
in the facility. Typically there will be some cor-
relation between these profiles.
Power and energy logging
2 Fluke Corporation
Fluke 1730 Three-Phase Electrical Energy Logger
Specifications
Accuracy
Parameter
Voltage
iFlex1500-12
iFlex3000-24
iFlex6000-36
i40s-EL clamp
Frequency
Aux input
Voltage Min/Max
Current Min/Max
Cosϕ/DPF
Power factor
THD on voltage
THD on current
Range
1000 V
150 A
1500 A
300 A
3000 A
600 A
6000 A
4A
40 A
42.5 Hz to 69 Hz
± 10 V dc
1000 V
defined by
accessory
0 <= Cosϕ <=1
0 <= PF <=1
1000 %
1000 %
Resolution
0.1 V
0.1 A
1A
1A
10 A
1A
10 A
1 mA
10 mA
0.01 Hz
0.1 mV
0.1 V
defined by
accessory
0.01
0.01
0.1 %
0.1 %
Intrinsic Accuracy at Reference Conditions
(% of Reading + % of Full Scale)
± (0.2 % + 0.01 %)
± (1 % + 0.02 %)
± (1 % + 0.02 %)
± (1 % + 0.02 %)
± (1 % + 0.02 %)
± (1.5 % + 0.03 %)
± (1.5 % + 0.03 %)
± (0.7 % + 0.02 %)
± (0.7 % + 0.02 %)
± (0.1 %)
± (0.2 % + 0.02 %)
± (1 % + 0.1 %)
± (5 % + 0.2 %)
±
±
±
±
0.025
0.025
(2.5 % ± 0.05 %)
(2.5 % ± 0.05 %)
Current:
Direct input
Intrinsic uncertainty ± (% of reading + % of range)
1
Parameter
Influence
iFlex1500-12
iFlex3000-24
quantity
150A/1500A
300A/3000A
Active power P
PF ≥ 0.99
1.2 % +
1.2 % +
0.005 %
0.0075 %
0.5 <PF <0.99
1.2 % + 7 x
1.2 % + 7 x
(1-PF)
(1-PF)
+0.005 %
+ 0.0075 %
Apparent power S, S fund.
0 ≤ PF ≤ 1
1.2 % +
1.2 % +
0.005 %
0.0075 %
Reactive power N, Q fund.
0 ≤ PF ≤ 1
2.5 % of measured apparent power
Additional uncertainty in %
U >250 V
0.015 %
0.0225 %
of range
1
1
iFlex6000-36
600/6000A
1.7 % +
0.0075 %
1.7 % + 7 x
(1-PF)
+ 0.0075 %
1.7 % +
0.0075 %
0.0225 %
i40s-EL
4A/40A
1.2 % +
0.005 %
1.2 % + 10 x
(1-PF)
+ 0.005 %
1.2 % +
0.005%
0.015 %
Range = 1000 V x Irange
Reference conditions:
Environmental: 23 °C ± 5 °C, instrument operating for at least 30 minutes, no external electrical/magnetic field, RH <65 %
Input conditions: Cos
ϕ
/PF=1, Sinusoidal signal f=50 Hz/60 Hz, power supply 120 V/230 V ±10 %.
Current and power specifications: Input voltage 1 ph: 120 V/230 V or 3 ph wye/delta: 230 V/400 V
Input current: I > 10 % of Irange
Primary conductor of clamps or Rogowski coil in center position
Temperature coefficient: Add 0.1 x specified accuracy for each degree C above 28 °C or below 18 °C
3 Fluke Corporation
Fluke 1730 Three-Phase Electrical Energy Logger
Electrical specifications
Power supply
Voltage range
Power consumption
Efficiency
Maximum no-load consumption
Mains power frequency
Battery
On-battery runtime
Charging time
Data acquisition
Resolution
Sampling frequency
Input signal frequency
Circuit types
THD
Averaging period
Demand interval
Data storage
Memory size
Logging period
100 V to 500 V using safety plug input when powering from the measurement
circuit
100 V to 240 V using standard power cord (IEC 60320 C7)
Maximum 50 VA (max. 15 VA when powered using IEC 60320 input)
≥ 68.2 % (in accordance with energy efficiency regulations)
< 0.3 W only when powered using IEC 60320 input
50/60 Hz ± 15 %
Li-ion 3.7 V, 9.25 Wh, customer-replaceable
Four hours in standard operating mode, up to 5.5 hours in power saving mode
< 6 hours
16-bit synchronous sampling
5120 Hz
50/60 Hz (42.5 to 69 Hz)
1-ϕ, 1-ϕ IT, Split phase, 3-ϕ delta, 3-ϕ wye, 3-ϕ wye IT, 3-ϕ wye balanced, 3-ϕ
Aron/Blondel (2-element delta), 3-ϕ delta open leg, Currents only (load studies)
THD for voltage and current is calculated using 25 harmonics
User selectable: 1 sec, 5 sec, 10 sec, 30 sec, 1 min, 5 min, 10 min, 15 min, 30 min
User selectable: 5 min, 10 min, 15 min, 20 min, 30 min
Internal flash memory (not user replaceable)
Typical 20 logging sessions of 10 weeks with 10-minute intervals
1
Averaging period
1 second
5 seconds
10 seconds
30 seconds
1 minute
5 minutes
10 minutes
15 minutes
30 minutes
Recommended
for 20 sessions
3 hours
15 hours
28 hours
3.5 days
7 days
5 weeks
10 weeks
3.5 months
7 months
Logging Period
for 1 session
2.5 days
12 days
24 days
10 weeks
20 weeks
2 years
> 2 years
> 2 years
> 2 years
1
Interfaces
USB-A
USB-mini
Extension port
Voltage inputs
Number of inputs
Maximum input voltage
Input impedance
Bandwidth (-3 dB)
Scaling
Measurement category
Current inputs
Number of inputs
Input voltage
Rogowski coil input
Range
File transfer via USB flash drive, firmware updates
Max. current: 120 mA
Data download device to PC
Accessories
4 (3 phases and neutral)
1000 V
rms
, CF 1.7
10 MΩ
2.5 kHz
1:1, 10:1, 100:1, 1000:1 and variable
1000 V CAT III/600 V CAT IV
3, mode selected automatically for attached sensor
Clamp input: 500 mV
rms
/50 mV
rms
; CF 2.8
150 mV
rms
/15 mV
rms
at 50 Hz, 180 mV
rms
/18 mV
rms
at 60 Hz; CF 4; all at nominal
probe range
1 A to 150 A/10 A to 1500 A with thin iFlex flexible current probe, 12 inches
3 A to 300 A/30 A to 3000 A with thin Flex flexible current probe, 24 inches
6 A to 600 A/60 A to 6000 A with thin iFlex flexible current probe, 36 inches
40 mA to 4 A/0.4 A to 40 A with 40 A clamp i40s-EL
1.5 kHz
1:1 and variable
Bandwidth (-3 dB)
Scaling
1
The number of possible logging sessions and logging period depends on user requirements.
Fluke 1730 Three-Phase Electrical Energy Logger
4 Fluke Corporation
Auxiliary inputs
Number of inputs
Input range
Scale factor (available 2014)
Displayed units (available 2014)
Environmental specifications
Operating temperature
Storage temperature
Operating humidity
2
0 to ± 10 V dc, 1 reading/s
Format: kx + d user configurable
User configurable (7 characters, for example, °C, psi, or m/s)
-10 °C to +50 °C (14 °F to 122 °F)
-20 °C to +60 °C (−4 °F to 140 °F)
10 °C to 30 °C (50 °F to 86 °F) max. 95 % RH
30 °C to 40 °C (86 °F to 104 °F) max. 75 % RH
40 °C to 50 °C (104 °F to 122 °F) max. 45 % RH
2000 m (up to 4000 m derate to 1000 V CAT II/600 V CAT III/300 V CAT IV)
12,000 m
IP50 in accordance with EN60529
MIL 28800E, Type 3, Class III, Style B
IEC 61010-1: Overvoltage CAT IV, Measurement 1000 V CAT III/600 V CAT IV,
Pollution Degree 2
EN 61326-1: Industrial
Applies to use in Korea only. Class A Equipment (Industrial Broadcasting and
Communication Equipment)
IEC CISPR 11: Group 1, Class A
0.1 x accuracy specification/°C
4.3-inch active matrix TFT, 480 pixels x 272 pixels, resistive touch panel
1730 and power supply: Two-years (battery not included)
Accessories: One-year
Calibration cycle: Two-years
1730: 19.8 cm x 16.7 cm x 5.5 cm (7.8 in x 6.6 in x 2.2 in)
Power supply: 13.0 cm x 13.0 cm x 4.5 cm (5.1 in x 5.1 in x 1.8 in)
1730 with power supply attached: 19.8 cm x 16.7 cm x 9 cm
(7.8 in x 6.6 in x 3.5 in)
1730: 1.1 kg (2.5 lb)
Power supply: 400 g (0.9 lb)
Holster, Kensington lock slot
Operating altitude
Storage altitude
Enclosure
Vibration
Safety
EMI, RFI, EMC
Electromagnetic compatibility
Radio frequency emissions
Temperature coefficient
General specifications
Color LCD display
Warranty
Dimensions
Weight
External protection
5 Fluke Corporation
Fluke 1730 Three-Phase Electrical Energy Logger
电子竞赛
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
