General Purpose Metallized Polyester Film Capacitors
R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC
(Automotive Grade)
Overview
The R66 Series is constructed of metallized polyester film
(wound or stacked technology) with radial leads of tinned
wire. Radial leads are electrically welded to the contact
metal layer on the ends of the capacitor winding. The
capacitor is encapsulated with thermosetting resin in a box
of material meeting the UL 94V–0 requirements.
Automotive grade devices meet the demanding Automotive
Electronics Council's AEC–Q200 qualification requirements.
Applications
Typical applications include blocking, coupling, decoupling,
bypassing and interference suppression in low voltage
applications such as automotive. Not suitable for across-
the-line application (see Suppressor Capacitors).
Benefits
• Voltage range: 50 – 630 VDC
• Capacitance range: 0.001 µF – 4.7 µF
• Lead Spacing: 7.5 mm
• Capacitance tolerance: ±5%, ±10%, ±20%
• Climatic category: 55/105/56
• Operating temperature range of −55˚C to +105˚C
• RoHS compliance and lead-free terminations
• Tape and reel packaging in accordance with IEC 60286–2
• Self-healing
• Automotive grade (AEC–Q200)
Part Number System
R66
Series
E
D
Length (mm)
D = 7.5
3100
Capacitance
Code (pF)
The last three
digits represent
significant figures.
First digit specifies
the number of zeros
to be added.
AA
Packaging
See Ordering
Options Table
7A
Internal Use
10
6A
7A
J
Capacitance
Tolerance
J = ±5%
K = ±10%
M = ±20%
Rated Voltage
(VDC)
Metallized Polyester C = 50
D = 63
E = 100
I = 250
M = 400
P = 630
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3102_R66 • 5/12/2017
1
General Purpose Metallized Polyester Film Capacitors
R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade)
Ordering Options Table
Lead Spacing
Nominal
(mm)
Type of Leads and Packaging
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
Ammo Pack
Other Lead and Packaging Options
4+2/−0
H
0
=18.5+/−0.5
H
0
= 18.5+/−0.5
2.7+0.5/−0
3.5+0.5/−0
10+/−1
3.2+0.3/−0.2
17+1/−2
AA
DQ
CK
JA
JB
JC
JH
Z3
LL Lead Length
(mm)
Lead and
Packaging
Code
7.5
Tape & Reel (Standard Reel)
Bulk (Bag) – Short Leads
Bulk (Bag) – Short Leads
Bulk (Bag) – Short Leads
Bulk (Bag) – Short Leads
Bulk (Bag) – Long Leads
Dimensions – Millimeters
Loose
L
H
d
p
LL
B
Taped
H
0
p
Nominal
7.5
7.5
7.5
7.5
Tolerance
+/−0.4
+/−0.4
+/−0.4
+/−0.4
Nominal
3.0
4.0
5.0
6.0
B
Tolerance
+0.1
+0.1
+0.1
+0.1
Nominal
8.0
9.0
10.5
12.0
H
Tolerance
+0.1
+0.1
+0.1
+0.1
Nominal
10.0
10.0
10.0
10.5
L
Tolerance
+0.2
+0.2
+0.2
+0.2
Nominal
0.5
0.6
0.6
0.6
d
Tolerance
+/−0.05
+/−0.05
+/−0.05
+/−0.05
Note: See Ordering Options Table for lead length (LL/H
0
) options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3102_R66 • 5/12/2017
2
General Purpose Metallized Polyester Film Capacitors
R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade)
Performance Characteristics
Dielectric
Plates
Winding
Leads
Protection
Related Documents
Rated Voltage V
R
(VDC)
Rated Voltage V
R
(VAC)
Capacitance Range (µF)
Capacitance Values
Capacitance Tolerance
Operating Temperature
Range
Rated Temperature T
R
Voltage Derating
Climatic Category
Polyester film (polyethylene terephthalate).
Metal layer deposited by evaporation under vacum.
Non-inductive type.
Tinned wire.
Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to
UL94.
IEC 60384–2
50
30
0.68 – 4.7
63
40
0.33 – 3.3
100
63
0.068 – 1.5
250
160
0.022 – 0.33
400
200
0.0068 – 0.15
630
220
0.001 – 0.047
E6 series (IEC 60063) measured at 1 kHz and +20 ±1°C
±5%, ±10%, ±20%
−55°C to +105°C Upper operating temperature of +125°C is allowed for a maximum operating time of 1,000
hours. (stacked technology only)
+85°C
Above +85°C DC and AC voltage derating is 1.25%/°C
55/105/56 IEC 60068–1
Storage time: ≤ 24 months from the date marked on the label package
Average relative humidity per year ≤ 70%
Storage Conditions
RH ≤ 85% for 30 days randomly distributed throughout the year
Dew is absent
Temperature: −40 to 80°C (see "Maximum Humidity in Storage Conditions" graph below)
Test Voltage
Capacitance Drift
Reliability
(Reference MIL-HDBK-217)
1.6 x V
R
VDC for 2 seconds (between terminations) at +25°C ±5°C
Maximum 3% after a 2 year storage period at a temperature of +10°C to +40°C and a relative humidity of 40%
to 60%
Operational life > 200,000 hours
Failure rate ≤ 2 FIT, T = +40°C, V = 0.5 x V
R
Failure criteria: open or short circuit, cap. change > 10%, DF 2 times the catalog limits, IR < 0.005 x initial limit
dV/dt according to Table 1. For peak to peak voltages lower than rated voltage (Vpp <V
R
), the specified dv/dt
can be multiplied by the factor V
R
/Vpp
+400 (±200)ppm/°C at 1 kHz
Approximately 8 nH. Maximum 1nH per 1 mm lead and capacitor length.
Maximum Pulse Steepness
Temperature Coefficient
Self Inductance
(Lead Length ~ 2 mm)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3102_R66 • 5/12/2017
3
General Purpose Metallized Polyester Film Capacitors
R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade)
Performance Characteristics cont'd
Maximum Values at 25°C ±5°C
Dissipation Factor tanδ
Frequency
1 kHz
10 kHz
For all Capacitance Values
1.00%
1.50%
Measured at +25°C ±5°C, according to IEC 60384–2
Minimum Values Between Terminals
Insulation Resistance
Voltage Carge / Time
50 VDC for V
R
≤100 VDC
1 minute
100 VDC for V
R
>100 VDC
1 minute
C ≤ 0.33 μF
≥3,750 MΩ
( ≥50,000 MΩ ) *
C > 0.33 μF
≥ 1,250 MΩ • µF
(≥5,000 MΩ • µF ) *
≥30,000 MΩ
( ≥50,000 MΩ )*
* typical value
Maximum Humidity in Storage Conditions
100
90
80
70
60
50
40
30
20
10
0
−40
Relative Humidity (%)
30 Days
Annual Average
−20
0
20
40
60
80
Temperature (ºC)
Qualification
Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details
regarding test methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive
Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their
website at www.aecouncil.com.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3102_R66 • 5/12/2017
4
General Purpose Metallized Polyester Film Capacitors
R66, Radial, 7.5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade)
Maximum Voltage (V
rms
) vs. Frequency (Sinusoidal Waveform/Th ≤ 40°C)
Vrms [V]
1000
63 Vdc / 40 Vac
Vrms [V]
1000
100 Vdc / 63 Vac
100
100
10
0.33 µF p=7.5
0.68 µF p=7.5
1.5 µF p=7.5
3.3 µF p=7.5
10
0.1
0.22
0.47
1
µF p=7.5
µF p=7.5
µF p=7.5
µF p=7.5
1
0.1
1
f [kHz]
10
100
1
0.1
1
f [kHz]
10
100
Vrms [V]
1000
250 Vdc / 160 Vac
Vrms [V]
1000
400 Vdc / 200 Vac
100
100
10
0.033
0.068
0.15
0.33
µF
µF
µF
µF
p=7.5
p=7.5
p=7.5
p=7.5
10
0.01 µF
0.022 µF
0.047 µF
0.15 µF
p=7.5
p=7.5
p=7.5
p=7.5
1
0.1
1
f [kHz]
10
100
1
0.1
1
f [kHz]
10
100
Vrms [V]
1000
630 Vdc / 220 Vac
100
10
0.001 µF
0.01 µF
0.022 µF
0.047 µF
p=7.5
p=7.5
p=7.5
p=7.5
1
0.1
1
f [kHz]
10
100
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3102_R66 • 5/12/2017
5
聊聊、笑笑、闹闹
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
