CV200, CV300, CV400
CV201, CV301, CV401
ClirVu
IR Windows
Installation Guide
English
PN 4341125
May 2013
© 2013 Fluke Corporation. All rights reserved. All product names are trademarks of their respective companies.
Product specifications are subject to change without notice.
1
2
CV200, CV300, CV400
ClirVu
®
IR Window
Installation Guide
Introduction
The ClirVu IR Window is a precision made accessory which, when accurately
surface of a Type 1, 2, 3/12, 3, and 12 enclosures, or as appropriate. All models
are for indoor and outdoor use.
Read and understand these instructions thoroughly before attempting to install
the units.
All of the items in Table 1 are available from Fluke.
Table 1. ClirVu IR Window Models
Series
CV200
CV300
CV400
PN 4341125
May 2013
© 2013 Fluke Corporation. All rights reserved. All product names are trademarks of their respective companies.
Size
50 mm (2″)
75 mm (3″)
100 mm (4″)
Nema Type
4, 12
4, 12
4, 12
3
4
5
6
1
3
4
2
7
8
Introduction
The ClirVu IR Window allows the flexibility to inspect an electrical enclosure both
visually and with infrared. Use this accessory on the flat surface of a Type 1, 2,
3/12, 3, and 4/12 enclosures, or as appropriate. All models are for indoor and
outdoor use. Table 1 is a list of the models available from Fluke.
Table 1. ClirVu IR Window Models
Model
CV200, CV201
CV300, CV301
CV400, CV401
IR Window Size
50 mm (2
in)
75 mm (3
in)
100 mm (4 in)
How to Contact Fluke
To contact Fluke, call one of the following telephone numbers:
●
●
●
●
●
●
●
Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)
Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore: +65-6799-5566
Anywhere in the world: +1-425-446-5500
Or, visit Fluke’s website at
http://www.fluke.com/irwindows.
To view, print, or download the latest manual supplement, visit
http://us.fluke.com/usen/support/manuals.
Safety Information
A Warning identifies conditions and procedures that are dangerous to the user.
Symbols used on the Product and in this document are in Table 2.
To prevent damage or injury:
● Read all directions before the installation.
● Comply with local and national safety requirements when working in
hazardous locations.
● Wear appropriate eye and ear protection.
● Check the window for cracks and damage before installation.
● Keep the cover closed and latched except during installation, viewing, or
temperature measurement.
Table 2. Symbols
Symbol
Explanation
Risk of danger. Important information. See manual.
Underwriters’ Laboratories, Inc. UL recognized component in North America.
Conforms to requirements of European Union directives.
NEMA Standard. Suitable for indoor/outdoor use.
This product complies with the WEEE Directive (2002/96/EC) marking requirements.
The affixed label indicates that you must not discard this electrical/electronic product in
domestic household waste. Product Category: With reference to the equipment types
in the WEEE Directive Annex I, this product is classed as category 9 “Monitoring and
Control Instrumentation” product. Do not dispose of this product as unsorted municipal
waste. Go to Fluke’s website for recycling information.
Warning
½
TYPE 4/12
2
Before You Start
When your IR Window arrives, unpack the unit. Identify and make sure all the
parts are in the shipment. See Figure 1.
Required tools for installation, see Figure 2:
•
•
•
•
•
Electro-hydraulic hole punch
Greenlee Punch/Die
Drilling machine
Center punch
Calibrated torque driver
Site Preparation
To prepare the installation site:
1. Mark a pilot hole with the center punch. See Figure 3.
2. Drill a 6 mm (0.2 in) pilot hole with the twist drill.
3. Use a Kwik Stepper drill bit to enlarge the 6 mm (0.2 in) pilot hole to 20 mm
(0.8 in). Or, drill a 10 mm (0.4 in) pilot hole and then enlarge the hole to
22.5 mm (0.875 in) with a Greenlee Punch/Die 71BB. See Figure 4.
4. Select the correct punch/die. See Table 3.
5. Use the Greenlee Punch/Die with the Electro-hydraulic hole punch to make
the hole diameter listed in Table 3. See Figure 5.
Table 3. Tool Selection
IR Window Size
50 mm (2 in)
75 mm (3 in)
100 mm (4 in)
Hole Size
61.37 mm (2.416 in)
89.89 mm (3.539 in)
115.42 mm (4.544 in)
Greenlee Punch/Die PN
76BB
739BB
742BB
3
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
