3M
™
Pin Strip Header
.100″ and .100″
×
.100″ Dual Insulator, Board Stacking
•
•
•
•
•
•
929 Series
36 sizes (1 to 36) position
Standard .025 inch square posts
.100 inch spacing between posts
Dual insulation
Board pin retention feature available
See Regulatory Information Appendix (RIA)
for chemical compliance information.
Date Modified: March 8, 2007
1/
TS-0817-05
Sheet 1 of 3
Physical
Insulation
Environmental
-40°C to +105°C
Process Rating:
260°C (per J-STD-020C) for PCT insulator parts
(PBT insulator version), maximum insulator temperature 191°C
(Wave Solder Process Only)
Moisture Sensitivity Level:
1 (per J-STD-020C) for PCT insulator parts
Temperature Rating:
UL File No.: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
D
IS
C
Electrical
Insulation Resistance:
> 5
×
10
9
Ω
at 500 V
DC
Withstanding Voltage:
1500 V
RMS
at Sea Level
O
Material:
Flammability:
Color:
Contact
Material:
Plating
Underplating:
Wiping Area:
Marking:
Current Rating:
2.5 A
N
T
Copper Alloy
50
μ″
[ 1.27
μm
] Nickel
10
μ″
[ 0.25
μm
] Gold
None
IN
Glass Filled Polyester (PBT) or PCT
UL 94V-0
Black
U
E
D
17
3M
™
Pin Strip Header
Mating Length
Code
Tail Length Code
A
B
.100″ and .100″
×
.100″ Dual Insulator, Board Stacking
Dimensions
D
929 Series
4217
4217
4217
6121
6581
6781
6101
24
28
32
01
01
01
01
.238 [6.05]
.235 [5.97]
.240 [6.10]
.100 [2.54]
.100 [2.54]
.100 [2.54]
.100 [2.54]
.110 [2.79]
.110 [2.79]
.110 [2.79]
.355 [9.02]
.465 [11.81]
.545 [13.84]
.350 [8.89]
C
See Note
.380 [9.65]
.500 [12.70]
.630 [16.00]
.390 [9.91]
.400 [10.16]
.600 [15.24]
.900 [22.86]
.115 [2.92]
.100
[2.54]
A
±
.008
.100
[2.54]
U
E
IN
B
±
.015
.025 Sq Typ
[0.64]
.100 Typ
[2.54]
D
±
.015
D
.060 [1.52]
.115 [2.92]
[mm]
Tolerance Unless Noted
.0
Inch
±
.1
.00
.000
±
.01
±
.005
T
N
∅
.040
±
.003 After Plating
[1.02]
C
.100
[2.54]
O
Recommended Hole Pattern
1/
2X .05 Max
[1.27]
(See Note 1)
D
IS
Note:
C = .10" [2.5] × pin quantity per row. Dimension C is a maximum when the pin strip is cut to length,
not when the strip is broken to length. Breaking strips to length not recommended.
Ordering Information
9XXXXX-XX-XX-XX
Board Retention Feature
2 = None
R = Kinked Tails
Mating Length Code
(See Table)
Plating Suffix
I = 10
μ″
[0.25
μ
m] all over, PBT insulator
(RIA E1 & C1 apply)
EU = 10
μ″
[0.25um] all over, PCT insulator
(RIA E1 & C1 apply)
TS-0817-05
Sheet 2 of 3
Tail Length Code
(See Table)
Pin Quantity
(01-36)
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
17
.050 [1.27]
One Row
Inch
[ ] Dimensions for
Reference only
3M
™
Pin Strip Header
.100″ and .100″
×
.100″ Dual Insulator, Board Stacking
Mating Length
Code
Tail Length Code
A
Dimensions
B
929 Series
D
4227
4227
4227
6122
6582
24
28
32
01
01
01
01
.238 [6.05]
.235 [5.97]
.240 [6.10]
.100 [2.54]
.100 [2.54]
.100 [2.54]
.100 [2.54]
.110 [2.79]
.110 [2.79]
.110 [2.79]
.355 [9.02]
.465 [11.81]
.545 [13.84]
.350 [8.89]
.380 [9.65]
.500 [12.70]
.630 [16.00]
.390 [9.91]
.400 [10.16]
.600 [15.24]
.900 [22.86]
Two Row
6782
6102
.215
[5.46]
.100
[2.54]
D
±
.008
.100
[2.54]
.025 Sq Typ
[0.64]
T
N
C
O
.100
[2.54]
IN
B
±
.015
.100 Typ
[2.54]
Ø
.040
±
.003 After Plating
[1.02]
U
E
[mm]
Tolerance Unless Noted
D
2X .05 Max
[1.27]
(See Note 1)
A
±
.015
.060
[1.52]
1/
.100
[2.54]
IS
.100
[2.54]
17
Inch
.0
Inch
±
.1
.00
.000
±
.01
±
.005
[ ] Dimensions for
Reference only
C
See Note
D
Recommended Hole Pattern
Note:
C = .10"
[2.5]
× pin quantity per row. Dimension C is a maximum when the pin strip is cut to length Breaking dual row strips to length is not recommended.
Ordering Information
9XXXXX-XX-XX-XX
Board Retention Feature
2 = None
R = Kinked Tails
Mating Length Code
Tail Length Code
(See Table)
(See Table)
Plating Suffix
I = 10
μ″
[0.25
μ
m] all over, PBT insulator
(RIA E1 & C1 apply)
EU = 10
μ″
[0.25um] all over, PCT insulator
(RIA E1 & C1 apply)
Pin Code
TS-0817-05
(Pins per Row)
Sheet 3 of 3
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/17/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision
2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party
suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
D
IS
C
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
O
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon
information provided by third party suppliers to 3M.
N
T
Appendix E3: European Union RoHS
IN
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
U
E
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
D
1/
Appendix E2: European Union RoHS
17
RIA-2217-B
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits
for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,
means that the product or part
does not
contain any of the following substances in excess of the following maximum
concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium,
polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise
stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by
third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
20
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the
accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended
application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s
current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in
writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.
3M MAKES NO OTHER
WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of the 3M product.
Except where prohibited by law, 3M will not be liable for any
indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3
Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
www.3M.com/interconnects
RIA-2217-B
© 3M 2007
D
IS
C
O
N
T
IN
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform
with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in
accordance with the product Warranty stated below.
Name and Content of Hazardous Substances or Elements
U
E
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits
for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,
means that the product or part
does
contain a substance, as detailed in the chart below, in excess of the following
maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless
otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
D
1/
17
电源技术
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
