12/29/2017
Type 12 Modular Console Cabinet (1472 Series) - Hammond Mfg.
Quality Products. Service Excellence.
Type 12 Modular Console Cabinet
1472 Series
Sloped Front
Application
Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
Heavy-duty construction provides protection from dirt, dust, oil and water. Sloping front
control and instrument panels provide an ideal surface for mounting operator controls or
instrumentation.
Interior mounting is provided for with a removable inner panel located on the rear of the
basic console.
Standards
UL 508A Type 12
CSA Type 12
Complies with
NEMA Type 12
IEC 60529, IP65
Construction
Formed 14 gauge steel.
Smooth, continuously welded seams, without knockouts, cutouts or holes.
Sloped front instrument panel is continuously hinged on the front (bottom) edge and
secured with captive panel screws, threaded into sealed wells.
Front instrument panel may be removed by pulling the hinge pin.
Flush doors are secured with a three point latch and operated with a key locking
automotive type handle.
Two door model has overlapping front doors, with three point latch on right door.
Oil resistant gaskets are permanently secured and mechanically retained.
Includes a removable inner panel formed from 12 gauge steel, mounted to the back of the
enclosure interior.
Collar studs are provided for mounting inner panels.
A bonding stud is provided on the door and a grounding stud is provided in the enclosure
for each door.
A literature pocket is provided.
Finish
Formed and welded from 14 gauge steel.
Sloping instrument panel and vertical rear access are completely removable.
Oil resistant gaskets are permanently secured and mechanically retained.
Captive panel screws fasten into sealed wells.
Accessories
Formed and welded from 14 gauge steel.
Fastens to the front of the console with screws
Accessories
https://www.hammfg.com/electrical/products/operator/1472
1/3
模拟与混合信号
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
