19-2983; Rev 3; 1/10
KIT
ATION
EVALU
BLE
AVAILA
Buffered, Fast-Settling, Octal, 12/10/8-Bit,
Voltage-Output DACs
General Description
The MAX5590–MAX5595 octal, 12/10/8-bit, voltage-out-
put digital-to-analog converters (DACs) offer buffered
outputs and a 3µs maximum settling time at the 12-bit
level. The DACs operate from a +2.7V to +5.25V analog
supply and a separate +1.8V to +5.25V digital supply.
The 20MHz 3-wire serial interface is compatible with
SPI™, QSPI™, MICROWIRE™, and digital signal
processor (DSP) protocol applications. Multiple devices
can share a common serial interface in direct-access or
daisy-chained configuration. The MAX5590–MAX5595
provide two multifunction, user-programmable, digital
I/O ports. The externally selectable power-up states of
the DAC outputs are either zero scale, midscale, or full
scale. Software-selectable FAST and SLOW settling
modes decrease settling time in FAST mode, or reduce
supply current in SLOW mode.
The MAX5590/MAX5591 are 12-bit DACs, the MAX5592/
MAX5593 are 10-bit DACs, and the MAX5594/
MAX5595 are 8-bit DACs. The MAX5590/MAX5592/
MAX5594 provide unity-gain-configured output buffers,
while the MAX5591/MAX5593/MAX5595 provide force-
sense-configured output buffers. The MAX5590–
MAX5595 are specified over the extended -40°C to
+85°C temperature range, and are available in space-
saving 24-pin and 28-pin TSSOP packages.
Features
o
Octal, 12/10/8-Bit Serial DACs in TSSOP Packages
o
3µs (max) 12-Bit Settling Time to 1/2 LSB
o
Integral Nonlinearity:
1 LSB (max) MAX5590/MAX5591 A-Grade (12-Bit)
1 LSB (max) MAX5592/MAX5593 (10-Bit)
1/2 LSB (max) MAX5594/MAX5595 (8-Bit)
o
Guaranteed Monotonic, ±1 LSB (max) DNL
o
Two User-Programmable Digital I/O Ports
o
Single +2.7V to +5.25V Analog Supply
o
+1.8V to AV
DD
Digital Supply
o
20MHz, 3-Wire, SPI-/QSPI-/MICROWIRE-/DSP-
Compatible Serial Interface
o
Glitch-Free Outputs Power Up to Zero Scale,
Midscale, or Full Scale Controlled by PU Pin
o
Unity-Gain or Force-Sense-Configured Output
Buffers
MAX5590–MAX5595
Applications
Portable Instrumentation
Automatic Test Equipment (ATE)
Digital Offset and Gain Adjustment
Automatic Tuning
Programmable Voltage and Current Sources
Programmable Attenuators
Industrial Process Controls
Motion Control
Microprocessor (µP)-Controlled Systems
Power Amplifier Control
Fast Parallel-DAC to Serial-DAC Upgrades
PART
MAX5590AEUG+*
MAX5590BEUG+
MAX5591AEUI+*
MAX5591BEUI+
MAX5592EUG+
MAX5593EUI+
MAX5594EUG+
MAX5595EUI+
Ordering Information
TEMP RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
24 TSSOP
24 TSSOP
28 TSSOP
28 TSSOP
24 TSSOP
28 TSSOP
24 TSSOP
28 TSSOP
*Future
product—contact factory for availability. Specifications
are preliminary.
+Denotes a lead(Pb)-free/RoHS-compliant package.
Selector Guide and Pin Configurations appear at end of data
sheet.
SPI/QSPI are trademarks of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor Corp.
________________________________________________________________
Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim's website at www.maxim-ic.com.
Buffered, Fast-Settling, Octal, 12/10/8-Bit,
Voltage-Output DACs
MAX5590–MAX5595
ABSOLUTE MAXIMUM RATINGS
AV
DD
to DV
DD
........................................................................±6V
AGND to DGND ..................................................................±0.3V
AV
DD
to AGND, DGND.............................................-0.3V to +6V
DV
DD
to AGND, DGND ............................................-0.3V to +6V
FB_, OUT_,
REF to AGND ........-0.3V to the lower of (AV
DD
+ 0.3V) or +6V
SCLK, DIN,
CS,
PU,
DSP
to DGND .......-0.3V to the lower of (DV
DD
+ 0.3V) or +6V
UPIO1, UPIO2
to DGND ...............-0.3V to the lower of (DV
DD
+ 0.3V) or +6V
Maximum Current into Any Pin .........................................±50mA
Continuous Power Dissipation (T
A
= +70°C)
24-Pin TSSOP (derate 13.9mW/°C above +70°C) .....1111mW
28-Pin TSSOP (derate 14mW/°C above +70°C) ........1117mW
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Maximum Junction Temperature .....................................+150°C
Lead Temperature (soldering, 10s) .................................+300°C
Soldering Temperature (reflow) .......................................+260°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(AV
DD
= 2.7V to 5.25V, DV
DD
= 1.8V to AV
DD
, V
AGND
= 0V, V
DGND
= 0V, V
REF
= 2.5V (for AV
DD
= 2.7V to 5.25V), V
REF
= 4.096V (for
AV
DD
= 4.5V to 5.25V), R
L
= 10kΩ, C
L
= 100pF, T
A
= T
MIN
to T
MAX
, unless otherwise noted. Typical values are at T
A
= +25°C.)
(Note 1)
PARAMETER
STATIC ACCURACY
MAX5590/MAX5591
Resolution
N
MAX5592/MAX5593
MAX5594/MAX5595
V
REF
= 2.5V at
AV
DD
= 2.7V and
V
REF
= 4.096V at
AV
DD
= 5.25V
(Note 2)
MAX5590A/MAX5591A (12-bit)
MAX5590B/MAX5591B (12-bit)
MAX5592/MAX5593 (10-bit)
MAX5594/MAX5595 (8-bit)
±2
±0.5
±0.125
12
10
8
±1
±4
LSB
±1
±0.5
±1
±5
±5
±5
±5
5
MAX5590A/MAX5591A (12-bit)
Gain Error
GE
Full-scale output
MAX5590B/MAX5590B (12-bit)
MAX5592/MAX5593 (10-bit)
MAX5594/MAX5595 (8-bit)
Gain-Error Drift
±20
±5
±2
1
±4
±40
±10
±3
ppm of
FS/°C
LSB
±25
±25
±25
ppm of
FS/°C
mV
LSB
Bits
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
Integral Nonlinearity
INL
Differential Nonlinearity
DNL
Guaranteed monotonic (Note 2)
MAX5590A/MAX5591A (12-bit), decimal code = 40
MAX5590B/MAX5591B (12-bit), decimal code = 40
MAX5592/MAX5593 (10-bit), decimal code = 10
MAX5594/MAX5595 (8-bit), decimal code = 3
Offset Error
V
OS
Offset-Error Drift
2
_______________________________________________________________________________________
Buffered, Fast-Settling, Octal, 12/10/8-Bit,
Voltage-Output DACs
ELECTRICAL CHARACTERISTICS (continued)
(AV
DD
= 2.7V to 5.25V, DV
DD
= 1.8V to AV
DD
, V
AGND
= 0V, V
DGND
= 0V, V
REF
= 2.5V (for AV
DD
= 2.7V to 5.25V), V
REF
= 4.096V (for
AV
DD
= 4.5V to 5.25V), R
L
= 10kΩ, C
L
= 100pF, T
A
= T
MIN
to T
MAX
, unless otherwise noted. Typical values are at T
A
= +25°C.)
(Note 1)
PARAMETER
Power-Supply Rejection
Ratio
REFERENCE INPUT
Reference Input Range
Reference Input
Resistance
Reference Leakage
Current
DAC OUTPUT CHARACTERISTICS
SLOW mode, full scale
Output Voltage Noise
FAST mode, full scale
Output Voltage Range
(Note 3)
DC Output Impedance
Short-Circuit Current
Power-Up Time
Wake-Up Time
Output OUT_ and FB_
Open-Circuit Leakage
Current
DIGITAL OUTPUTS (UPIO_)
Output High Voltage
Output Low Voltage
V
OH
V
OL
I
SOURCE
= 2mA
I
SINK
= 2mA
DV
DD
≥
2.7V
Input High Voltage
V
IH
DV
DD
< 2.7V
DV
DD
> 3.6V
Input Low Voltage
Input Leakage Current
Input Capacitance
V
IL
I
IN
C
IN
2.7V
≤
DV
DD
≤
3.6V
DV
DD
< 2.7V
±0.1
10
2.4
0.7 x
DV
DD
0.8
0.6
0.2
±1
µA
pF
V
V
DV
DD
-
0.5
0.4
V
V
AV
DD
= 5V, OUT_ to AGND, full scale, FAST mode
AV
DD
= 3V, OUT_ to AGND, full scale, FAST mode
From V
DD
applied until interface is functional
Coming out of shutdown, outputs settled
Programmed in shutdown mode, force-sense
outputs only
Unity-gain output
Force-sense output
Unity gain
Force sense
Unity gain
Force sense
0
0
38
57
45
30
40
0.01
60
85
67
140
110
AV
DD
AV
DD
/ 2
V
Ω
mA
µs
µs
µA
µV
RMS
V
REF
R
REF
Normal operation (no code dependence)
Shutdown mode
0.25
145
200
0.5
1
AV
DD
V
kΩ
µA
SYMBOL
PSRR
CONDITIONS
Full-scale output, AV
DD
= 2.7V to 5.25V
MIN
TYP
200
MAX
UNITS
µV/V
MAX5590–MAX5595
DIGITAL INPUTS (SCLK,
CS,
DIN,
DSP,
UPIO_)
_______________________________________________________________________________________
3
Buffered, Fast-Settling, Octal, 12/10/8-Bit,
Voltage-Output DACs
MAX5590–MAX5595
ELECTRICAL CHARACTERISTICS (continued)
(AV
DD
= 2.7V to 5.25V, DV
DD
= 1.8V to AV
DD
, V
AGND
= 0V, V
DGND
= 0V, V
REF
= 2.5V (for AV
DD
= 2.7V to 5.25V), V
REF
= 4.096V (for
AV
DD
= 4.5V to 5.25V), R
L
= 10kΩ, C
L
= 100pF, T
A
= T
MIN
to T
MAX
, unless otherwise noted. Typical values are at T
A
= +25°C.)
(Note 1)
PARAMETER
PU INPUT
Input High Voltage
Input Low Voltage
Input Leakage Current
DYNAMIC PERFORMANCE
Voltage-Output Slew
Rate
SR
FAST mode
SLOW mode
MAX5590/MAX5591 from code 322 to
code 4095 to 1/2 LSB
FAST
mode
MAX5592/MAX5593 from code 10 to
code 1023 to 1/2 LSB
MAX5594/MAX5595 from code 3 to
code 255 to 1/2 LSB
MAX5590/MAX5591 from code 322 to
code 4095 to 1/2 LSB
SLOW
mode
MAX5592/MAX5593 from code 10 to
code 1023 1/2 LSB
MAX5594/MAX5595 from code 3 to
code 255 to 1/2 LSB
FB_ Input Voltage
FB_ Input Current
Reference -3dB
Bandwidth (Note 6)
Digital Feedthrough
Digital-to-Analog Glitch
Impulse
DAC-to-DAC Crosstalk
Unity gain
Force sense
CS
= DV
DD
, code = zero scale, any digital input
from 0 to DV
DD
and DV
DD
to 0, f = 100kHz
Major carry transition
(Note 4)
200
150
0.1
2
15
0
3.6
1.6
2
1.5
1
3
2.5
2
3
3
2
µs
6
6
4
V
REF
/ 2
0.1
V
µA
kHz
nV-s
nV-s
nV-s
V/µs
V
IH-PU
V
IL-PU
I
IN-PU
PU still considered unconnected when connected to
a tri-state bus
DV
DD
-
200mV
200
±200
V
mV
nA
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
Voltage-Output Settling
Time (Note 5)
4
_______________________________________________________________________________________
Buffered, Fast-Settling, Octal, 12/10/8-Bit,
Voltage-Output DACs
ELECTRICAL CHARACTERISTICS (continued)
(AV
DD
= 2.7V to 5.25V, DV
DD
= 1.8V to AV
DD
, V
AGND
= 0V, V
DGND
= 0V, V
REF
= 2.5V (for AV
DD
= 2.7V to 5.25V), V
REF
= 4.096V (for
AV
DD
= 4.5V to 5.25V), R
L
= 10kΩ, C
L
= 100pF, T
A
= T
MIN
to T
MAX
, unless otherwise noted. Typical values are at T
A
= +25°C.)
(Note 1)
PARAMETER
POWER REQUIREMENTS
Analog Supply Voltage
Range
Digital Supply Voltage
Range
AV
DD
DV
DD
SLOW mode, all digital inputs Unity gain
at DGND or DV
DD
, no load,
Force sense
V
REF
= 4.096V
FAST mode, all digital inputs
at DGND or DV
DD
, no load,
V
REF
= 4.096V
Unity gain
Force sense
2.70
1.8
1.5
2.4
2.5
3.4
5.25
AV
DD
3.2
4.8
mA
8
8
V
V
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
MAX5590–MAX5595
Operating Supply
Current
I
AVDD
+
I
DVDD
Shutdown Supply
Current
I
AVDD(SHDN)
No clocks, all digital inputs at DGND or DV
DD
, all
+
DACs in shutdown mode
I
DVDD(SHDN)
0.5
1
µA
Note 1:
For the force-sense versions, FB_ is connected to its respective OUT_. VOUT (max) = VREF / 2, unless otherwise noted.
Note 2:
Linearity guaranteed from decimal code 40 to code 4095 for the MAX5590B/MAX5591B (12-bit, B-grade), code 10 to code
1023 for the MAX5592/MAX5593 (10-bit), and code 3 to code 255 for the MAX5594/MAX5595 (8-bit).
Note 3:
Represents the functional range. The linearity is guaranteed at VREF = 2.5V (for AVDD from 2.7V to 5.25V), and VREF =
4.096V (for AVDD = 4.5V to 5.25V). See the
Typical Operating Characteristics
section for linearity at other voltages.
Note 4:
DC crosstalk is measured as follows: outputs of DACA–DACH are set to full scale and the output of DACH is measured.
While keeping DACH unchanged, the outputs of DACA–DACG are transitioned to zero scale and the
∆V
OUT of DACH is
measured.
Note 5:
Guaranteed by design.
Note 6:
The reference -3dB bandwidth is measured with a 0.1VP-P sine wave on VREF and with full-scale input code.
_______________________________________________________________________________________
5
聊聊、笑笑、闹闹
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
