Subminiature Pushbuttons
Series HB
Distinctive Characteristics
Full face and spot illumination available. Front panel relamping.
Choice of super bright LEDs in white, green, and blue in
addition to bright red, amber, and green LEDs.
Compact front panel design with 9mm square or round
bezel options.
Rear panel threaded mounting. Behind panel depth
of less than one inch. 8mm body diameter
fits common size panel cutout.
Latchdown feature gives indication of circuit status.
Audible and tactile feedback with smooth and
responsive operation.
Dual, sliding contacts with self-cleaning action provide
contact stability, high reliability, and increased
operating life.
Solder lug terminals have spacing of .100” (2.54mm) for choice
of mounting.
Longer normally closed terminal facilitates wiring and soldering.
Molded-in terminals lock out flux, dust, and other contaminants.
Nonilluminated models available.
Matching indicators available.
Actual Size
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991- 0942 • Fax (480) 998-1435 • www.nkkswitches.com
3-05
Subminiature Pushbuttons
Series HB
General Specifications
Electrical Capacity (Resistive Load)
Power Level (code W):
0.1A maximum @ 30V AC/DC
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Nominal Operating Force:
Contact Timing:
Travel:
50 milliohms maximum
100 megohms minimum @ 500V DC
500V AC minimum for 1 minute minimum
100,000 operations minimum
50,000 operations minimum
3.43N
Nonshorting (break before make)
Pretravel .087” (2.2mm); Overtravel .031” (0.8mm); Total Travel .118” (3.0mm)
Materials & Finishes
Housing:
Base:
Movable Contact:
Stationary Contacts:
Common Terminal:
End Terminals:
Lamp Terminals:
Glass fiber reinforced polyamide
Glass fiber reinforced polyamide
Phosphor bronze with silver plating
Phosphor bronze with silver plating
Phosphor bronze with silver plating
Phosphor bronze with silver plating
Phosphor bronze with silver plating
Environmental Data
Operating Temp Range:
Humidity:
Vibration:
Shock:
–25°C through +50°C (–13°F through +122°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
50G (490m/s
2
) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Installation
Mounting Torque:
Cap Installation Force:
Soldering Time & Temperature:
0.49Nm (4.34 lb
•
in) maximum for round mounting nut
9.8N (2.2 lbf) maximum downward force on cap
4 seconds maximum @ 390°C maximum for manual soldering
Note: Find additional processing data in Supplement section.
Standards & Certifications
R
UL & C-UL
Recognized:
R
All models recognized at 0.1A @ 30V AC/DC;
UL File No. WOYR2.E44145;
add “/U” to end of part number to order UL mark on switch.
C-UL File No. WOYR8.E44145;
add “/UC” to end of part number to order C-UL mark on switch.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991- 0942 • Fax (480) 998-1435 • www.nkkswitches.com
3-05
Subminiature Pushbuttons
TYPICAL SWITCH ORDERING EXAMPLE
Series HB
JB
HB
POLE
1
SPDT
1
5
S
K
W01
6G
HOUSING
K
Black only
CIRCUITS
5
6
ON
ON
(ON)
ON
( ) = Momentary
Alternate Action
with Latchdown
CONTACTS & TERMINALS
Silver Contacts and
W01
Solder Lug Terminals
0.1A @ 30V AC/DC
SHAPES
S
C
Square
Round
5C
5D
5F
LEDS
Bright
Red
Amber
Green
AB
CB
DB
FB
JB
Super Bright
6B
6F
6G
White
Green
Blue
JB
CAP TYPES & COLORS
LED Cap: Lens/Diffuser Color
Black Cap/White Window for
Spot Illuminaterd (Square only)
Red/White
Amber/White
Green/White
Clear/White
LED Cap: Lens/Diffuser Color
Clear/White
IMPORTANT:
Switches are supplied without UL
& C-UL markings unless specified.
Specific models & ratings noted on
General Specifications page.
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
HB15SKW01-6G-JB
Blue, Super Bright LED
White Cap
Square Shape
Black Housing
SPDT ON-(ON) Circuit
Silver Contacts and Solder Lug Terminals;
rated 0.1A @ 30V AC/DC
3-05
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991- 0942 • Fax (480) 998-1435 • www.nkkswitches.com
Subminiature Pushbuttons
POLES & CIRCUITS
Plunger Position
( ) = Momentary
Normal
Pole
SP
Model
HB15
*HB16
ON
ON
(ON)
ON
1-3
1-2
SPDT
3
Series HB
Connected Terminals
Normal
Down
Notes:
Throw & Switch/Lamp Schematics
Switch is marked with NO, NC, C, L.
LED circuit is isolated and requires
external power source.
1 (COM)
(+)
(-)
Down
2
* When in latchdown position for the alternate circuit, cap position is .051” (1.3mm) above the built-in bezel.
SHAPES
S
.354” (9mm) Square
C
.354” (9mm) Round
The bezel is an integral
part of the switch body.
The bezel is an integral
part of the switch body.
Panel Cutout & Mounting
Recommended Panel Thickness:
.020 ~ .197” (0.5 ~ 5.0mm)
(8.0) Dia
.315
Overtightening the mounting nut AT073
may damage the switch housing.
HOUSING
K
Housing available in black only.
CONTACT MATERIALS, RATINGS, & TERMINALS
W01
Silver Contacts
Power Level
0.1A maximum @ 30V AC/DC
Solder Lug
The .039” x .079” (1.0mm x 2.0mm)
oblong hole accommodates one solid
or one stranded 20-gauge wire or two
22-gauge wires.
(5.0)
.197
(2.0)
.079
(1.0)
.039
(1.8)
.071
PCB Mounting
Solder lug terminals are spaced
.100” x .200” (2.54mm x 5.08mm).
This enables PCB mounting which can be
accomplished by elongating PC board
holes to .080” (2.03mm).
3-05
Thk = (0.3)
.012
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991- 0942 • Fax (480) 998-1435 • www.nkkswitches.com
Subminiature Pushbuttons
LED COLORS & SPECIFICATIONS
Series HB
The electrical specifications shown are determined at a basic temperature of 25°C.
LED circuit is isolated and requires external power source. Single element LED is colored in OFF state.
If the source voltage exceeds the rated voltage, a ballast resistor is required.
The resistor value can be calculated by using the formula in the Supplement section.
Bright
AT633
Super Bright
AT624G
Blue
AT629B
White
AT630F
Green
T-1 Bi-pin
Note for Super Bright:
(+)
(-)
Electrostatic
Sensitive Devices
Attention
Bright
Super Bright
5C
Red
30
20
1.85
5
0.40
5D
Amber
30
20
2.0
5
0.42
–25° ~ +50°C
5F
Green
25
20
2.2
5
0.38
6B
White
30
20
3.6
5
0.50
6F
Green
30
20
3.5
5
0.50
6G
Blue
30
20
3.6
5
0.50
Unit
mA
mA
V
V
mA/°C
Color
I
FM
I
F
V
F
V
RM
∆
IF
Forward Peak Current
Continuous Forward Current
Forward Voltage
Reverse Peak Voltage
Current Reduction Rate Above 25°C
Ambient Temperature Range
–25° ~ +50°C
CAP TYPES & COLORS
Color Codes:
A
Black
B
White
C
Red
D
Amber
F
Green
J
Clear
Colored Cap for Bright LEDs
Cap Colors Available:
(7.4) Sq
.291
(4.8)
.189
(4.6)
.181
(1.8)
.071
(1.2)
.047
(3.0)
.118
AB
Black Cap with Translucent
White Window for LED Display
AT4052
Spot Illuminated
Square only
Material: Polycarbonate
Finish: Matte
Lens/Diffuser
Colors Available:
AT4166
Square
(7.4) Sq
.291
(4.5)
.177
(4.8)
.189
(4.8)
.189
AT4167
Round
(7.4) Dia
.291
(4.5)
.177
Transparent Colored
Lens
Translucent
White Diffuser
Colored LED
AT633
CB
DB
FB
Red/White
Amber/White
Green/White
Material: Polycarbonate
Finish: Glossy
White Cap for Bright & Super Bright LEDs
JB
Clear Lens/
White Diffuser
AT4031
Square
(7.4) Sq
.291
(4.5)
.177
(4.8)
.189
AT4032
Round
(7.4) Dia
.291
(4.5)
.177
(4.8)
.189
Transparent Clear
Lens
Translucent
White Diffuser
Colored LEDs
AT624, AT629,
AT630, or AT633
3-05
Material: Polycarbonate
Finish: Glossy
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991- 0942 • Fax (480) 998-1435 • www.nkkswitches.com
求职招聘
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
