VJ High Q
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for High Frequency Applications
FEATURES
• Ultra-stable dielectric offering a Temperature
Coefficient of Capacitance (TCC) of
0 ppm/°C ± 30 ppm/°C over the entire
temperature range
• Low Dissipation Factor (DF)
• Wet build process
• Reliable
system
Noble
Metal
Electrode
(NME)
Available
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
APPLICATIONS
• Ideal for critical timing applications
• Ideal for tuning applications
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at + 25 °C unless otherwise specified.
Operating Temperature:
- 55 °C to + 150 °C
Voltage Range:
50 V
DC
to 200 V
DC
Capacitance Range:
1.0 pF to 220 pF
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C
Dissipation Factor (DF):
0.1 % maximum at 1.0 V
RMS
and 1 MHz for values
1000
pF
0.1 % maximum at 1.0 V
RMS
and 1 kHz for values > 1000 pF
Aging Rate:
0 % maximum per decade
Insulation Resistance (IR):
At + 25 °C and rated voltage 100 000 M minimum or,
1000
F
whichever is less.
At + 125 °C and rated voltage 10 000 M minimum or
100
F,
whichever is less.
Dielectric Strength Test:
Performed per method 103 of EIA 198-2-E.
Applied test voltages:
200 V
DC
-rated: 250 % of rated voltage
Revision: 28-May-2018
Document Number: 45050
1
For technical questions, contact:
mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
VJ High Q
www.vishay.com
Vishay Vitramon
CAPACITANCE
MINIMUM
1.0 pF
1.0 pF
MAXIMUM
100 pF
220 pF
QUICK REFERENCE DATA
DIELECTRIC
HIGH Q
C0G (NP0)
Note
• Detail ratings see “Selection Chart”
CASE
0603
0805
MAXIMUM VOLTAGE
(V)
100
200
ORDERING INFORMATION
VJ0805
CASE
CODE
0603
0805
Q
101
K
CAPACITANCE
TOLERANCE
X
TERMINATION
A
DC VOLTAGE
RATING
(1)
A = 50 V
B = 100 V
C = 200 V
A
MARKING
C
###
(2)
DIELECTRIC CAPACITANCE
NOMINAL
CODE
Q = HIGH Q
PACKAGING PROCESS
CODE
X = Ni barrier
B = ± 0.10 pF
Expressed in
100 % tin plated
C = ± 0.25 pF
picofarads (pF).
F, E = AgPd
(3)
D = ± 0.5 pF
The first two
F=±1%
digits are
G=±2%
significant, the
J=±5%
third is a
K = ± 10 %
multiplier. An
Note
“R” indicates a
B, C, D < 10 pF
decimal point.
F, G, J, K
10 pF
Examples:
101 = 100 pF
1R8 = 1.8 pF
A = Unmarked
C = 7" reel/paper tape
O = reel/flamed paper tape
I = 11 1/4"/13" reel/flamed
paper tape
P = 11 1/4"/13" reel/
paper tape
Note
“O” and “I” are used for
“F” and “E” termination
Notes
• Size 0402 available with Vishay Basic Commodity series, see datasheet:
www.vishay.com/doc?28534
(1)
DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.
Consult for questions:
mlcc@vishay.com
(2)
Process code may be added with up to three digits, used to control non-standard products and /or special requirements.
(3)
Termination code “E” is for conductive epoxy assembly.
ENVIRONMENTAL STATUS
TERMINATION CODE
X
E
F
TERMINATION DESCRIPTION
Ni barrier 100 % tin plated matte finish
AgPd
AgPd
RoHS COMPLIANT
Yes
Yes
Yes
VISHAY GREEN
Yes
Yes
No
DIMENSIONS
in inches (millimeters)
L
W
T
MAX.
P
CASE
CODE
0603
0805
STYLE
LENGTH
(L)
0.063 ± 0.006
(1.60 ± 0.15)
0.079 ± 0.008
(2.00 ± 0.20)
WIDTH
(W)
0.031 ± 0.006
(0.80 ± 0.15)
0.049 ± 0.008
(1.25 ± 0.20)
MAXIMUM
THICKNESS
(T)
0.036
(0.92)
0.057
(1.45)
TERMINATION
(P)
MINIMUM
0.012
(0.30)
0.010
(0.25)
MAXIMUM
0.022
(0.55)
0.030
(0.76)
VJ0603
VJ0805
Revision: 28-May-2018
Document Number: 45050
2
For technical questions, contact:
mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
VJ High Q
www.vishay.com
Vishay Vitramon
HIGH Q
VJ0603
0603
50
A
100
B
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
50
A
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
VJ0805
0805
100
B
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (V
DC
)
VOLTAGE CODE
CAP. CODE
1R0
1R2
1R5
1R8
2R2
2R7
3R3
3R9
4R7
5R6
6R8
8R2
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
200
C
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
CAP.
1.0 pF
1.2 pF
1.5 pF
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
Notes
RoHS-compliant
•• Available in paper carrier tape only
HIGH Q PACKAGING QUANTITIES
CASE CODE
0603
0805
TAPE SIZE
8 mm
8 mm
(1)
7" REEL QUANTITIES
PACKAGING CODE
“C”/“O”
4000
3000
11 1/4" AND 13" REEL QUANTITIES
PACKAGING CODE
“P”/“I”
10 000
10 000
Note
(1)
Reference: EIA standard RS481 - “Taping of Surface Mount Components for Automatic Placement”
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to + 40 °C ambient temperature and
70 % related humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 28-May-2018
Document Number: 45050
3
For technical questions, contact:
mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
VJ High Q
www.vishay.com
Vishay Vitramon
HIGH Q DIELECTRIC - TYPICAL PARAMETERS
TEMPERATURE COEFFICIENT OF CAPACITANCE
2.0
% CAPACITANCE CHANGE
MIN. INSULATION RESISTANCE VS. TEMPERATURE
10 000
INSULATION RESISTANCE
(ΩF)
1.5
1.0
0.5
0.0
- 0.5
- 1.0
- 1.5
- 2.0
- 75 - 50 - 25
0
25
50
75 100 125 150 175
TEMPERATURE °C
AGING RATE
0.2
NP0
1000
100
10
10
25
100
50
TEMPERATURE °C
150
VOLTAGE COEFFICIENT OF CAPACITANCE
0.2
% CAPACITANCE CHANGE
% CAPACITANCE CHANGE
0.1
0.1
0.0
0.0
- 0.1
- 0.1
- 0.2
1
10
100
HOURS
CHANGE OF CAPACITANCE WITH FREQUENCY
+2
RESONANT FREQUENCY (GHz)
% CAPACITANCE CHANGE
- 0.2
1000
10 000
0
10
20
30
40
50
60
70
80
90
100
DC VOLTS APPLIED
SERIES RESONANT FREQUENCY
10
+1
0
1
0603
0805
-1
-2
1 kHz
0.1
10 kHz
100 kHz
1 MHz
1
10
100
1000
FREQUENCY
Q VS. FREQUENCY - VJ0805, 50 V
CAPACITANCE (pF)
ESR VS. FREQUENCY - VJ0805, 50 V
10 000
10 pF
ESR (Ω )
1
1000
100
Q
100 pF
10 pF
0.1
10
100 pF
1
100
FREQUENCY (MHz)
1000
0.01
100
FREQUENCY (MHz)
1000
Revision: 28-May-2018
Document Number: 45050
4
For technical questions, contact:
mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
模拟与混合信号
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
