Note 2 : Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted.
Product performance may not be indicated by the Electrical Characteristics if operated under different conditions.
www.onsemi.com
2
NSVJ3557SA3
www.onsemi.com
3
NSVJ3557SA3
PACKAGE DIMENSIONS
unit : mm
SC-59 / CP3
CASE 318BJ
ISSUE O
A
3
D
3X
L
E1
1
2
E
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSIONS D AND E1 DO NOT INCLUDE MOLD FLASH, PRO-
TRUSIONS, OR GATE BURRS. MOLD FLASH, PROTRUSIONS,
OR GATE BURRS SHALL NOT EXCEED 0.20 PER SIDE.
4. DIMENSIONS D AND E1 ARE MEASURED AT THE OUTERMOST
EXTREME OF THE PLASTIC BODY.
5. DIMENSIONS b AND c APPLY TO THE FLAT SECTION OF THE
LEAD BETWEEN 0.10 AND 0.20 FROM THE TIP.
DIM
A
A1
A2
b
c
D
E
E1
e
L
MILLIMETERS
MIN
MAX
0.95
1.35
0.00
0.10
0.20
0.40
0.35
0.50
0.10
0.20
2.75
3.05
2.30
2.70
1.35
1.65
0.95 BSC
0.35
0.75
e
TOP VIEW
3X
b
0.10
A
3X
M
C A
c
A2
A1
SIDE VIEW
C
SEATING
PLANE
END VIEW
GENERIC
MARKING DIAGRAM
XXX M
1
XXX
= Specific Device Code
M
= Date Code
= Pb-Free Package
(Note: Microdot may be in either location)
*This information is generic. Please refer to
device data sheet for actual part marking.
RECOMMENDED
SOLDERING FOOTPRINT*
0.80
3X
1.00
3X
3.40
0.95
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb-Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
www.onsemi.com
4
NSVJ3557SA3
ORDERING INFORMATION
Device
NSVJ3557SA3T1G
Marking
IR
Package
SC-59 3-Lead / CP3
Pb-Free)
Shipping
3,000 / Tape & Reel
† For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States
and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of
SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf . SCILLC reserves the right to make changes without
further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose,
nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including
without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can
and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are
not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or
sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers,
employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was
negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all
applicable copyright laws and is not for resale in any manner.
在multi_rx.c例程里面有这样一段代码
sCANMessage.ulMsgID = 0x1001; // CAN msg ID sCANMessage.ulMsgIDMask = 0xfffff; // mask, all 20 bits must match sCANMessage.ulFlags = MSG_OBJ_R ......
综合技术交流
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
