lithic bi-directional coupler in a low cost SO-8 plastic
package. This 17 dB coupler is ideally suited for ap-
plications where power monitoring, small size, low
insertion loss, superior repeatability, and low cost
are required. Typical applications include base sta-
tion switching networks, power monitoring in hand-
helds and other communication applications where
size and PCB real estate is a premium. Available in
tape and reel.
The MACPCC0002 is fabricated using a passive-
integrated circuit process. The process features full
chip passivation for increased performance and reli-
ability.
1. Pins 2, 3, 6, and 7 must be RF and DC grounded.
Pin Configuration
Pin No.
Function
RF IN
GND
GND
RF OUT
Pin No.
5
6
7
8
Function
ISOLATED
GND
GND
COUPLED
Ordering Information
Part Number
MACPCC0002
MACPCC0002-TR
MACPCC0002-TB
1
2
Package
Bulk Packaging
1000 piece reel
Sample Test Board
3
4
Note: Reference Application Note M513 for reel size
information.
1
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macom.com
for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MACPCC0002
Low Cost SMT 17dB Bi-Directional Coupler
824 – 960 MHz
Electrical Specifications: T
A
= 25°C, Z
0
= 50
1
Parameter
Insertion Loss
VSWR
Coupling
Coupling Flatness
Directivity
Rev. V3
Units
dB
—
dB
dB
dB
Min
—
—
—
—
10
Typ
0.3
1.3:1
17±2
1.2
15
Max
0.5
1.6:1
—
1.5
—
Absolute Maximum Ratings
2,3
Parameter
Input Power
Operating Temperature
Storage Temperature
2.
3.
Handling Procedures
Please observe the following precautions to avoid
damage:
Absolute Maximum
2W CW
-40ºC to +85ºC
-65ºC to +150ºC
Static Sensitivity
GMIC Circuits are sensitive to electrostatic
discharge (ESD) and can be damaged by static
electricity. Proper ESD control techniques should
be used when handling these devices.
Exceeding any one or combination of these limits may
cause permanent damage to this device.
M/A-COM does not recommend sustained operation near
these survivability limits.
Recommended PCB Configuration
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macom.com
for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MACPCC0002
Low Cost SMT 17dB Bi-Directional Coupler
824 – 960 MHz
Typical Performance Curves @ +25ºC
Directivity vs. Frequency
Insertion Loss vs. Frequency
Rev. V3
VSWR vs. Frequency
Coupling vs. Frequency
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macom.com
for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MACPCC0002
Low Cost SMT 17dB Bi-Directional Coupler
824 – 960 MHz
Lead-Free,
SOIC-8
†
Rev. V3
†
Reference Application Note M538 for lead-free solder reflow
recommendations.
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macom.com
for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MACPCC0002
Low Cost SMT 17dB Bi-Directional Coupler
824 – 960 MHz
Rev. V3
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macom.com
for additional data sheets and product information.
1>.\YX_GPS\port\c\yu_port_gui.c(79) : error C2039: 'Release' : is not a member of 'IDirectDrawSurface'
1> D:\Program Files\Windows CE Tools\wce500\STANDARDSDK_500\include\A ......
China and the U.S. have quietly started negotiating to improve U.S. access to Chinese markets, after a week filled with harsh words from both sides over Washington’s threat to use ......
2008年7月9日, CombOLED 研究项目的工作重点是开发出高性价比的生产工艺，以实现有机发光二极管 (OLED) 的量产。欧司朗光电半导体公司固态照明部主管 Bernhard Stapp 表示：“该项目由欧盟提供资金支持，欧司朗负责协调运作，旨在为推行新型照明光源应用创造必要的条件。”这包括采用性价比卓越的方法构建新型元件架构，从而生产出大幅面透明光源。作为 LED 市场的创新推...[详细]
UHF和HF都是一般的技术分类，不过每一类都有独立的支持协议。HF在13.56MHz频段更具有一致性，虽然国际业内行业标准很多。UHF RFID在858-960MHz频段已商业化。同时也有多种国际标准支持，包括EPC global Gen 2。 标签与读写器通过无线链接交换数据。链接可以通过适合任何频段的、具有不同读取范围和抗干扰性的EMF或RF场实现。HF RFID技术主要通过电磁场传送信...[详细]
中风发生时，一切都是以秒来计算的。延误治疗可能导致大脑重大损伤。伦敦大学医学院的一位博士Alistair McEwan已经获得行为医学研究所(Action Medical Research)的同意，为急救人员开发一种无线诊断系统来减少时间延误。感谢抗血栓药物，一些病人在病情发作的三个小时之内可以完全恢复。但出血也会导致中风。医生在治疗之前需要确定发病原因，因为不适当的服用抗血栓药物会加重损害。...[详细]
SynQor推出超小的病人全接触型400W医疗电源模块，该电源模块的封装为3×5×1.44，功率密度高达18.3W/立方英寸，转换效率达91%。 SynQor通过推出首款专门针对医疗应用而研制的AC/DC电源模块，使得公司的多元化战略持续成功地延伸至新的医疗领域。ACuQor模块系列实现了在3×5×1.44有限尺寸上提供400W的有用功率。SynQor可以提供48V，36V or 24V的...[详细]
工作这点儿事
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
