JTAGjet-C2000
JTAGjet-C2000
™
Emulator for the C2000 Family
of MCU/DSPs from Texas Instruments
is a small, palm-sized In-Circuit
Debugger for the TMS320C2000 family of MCU/DSPs from
Texas Instruments. It is equipped with USB 2.0 interface that
runs in the High-Speed mode at 480 Mb/sec.
Support for the entire C2000 Family
JTAGjet-C2000 supports the following C2000 MCU/DSP
devices
:
TMS320C24x
TMS320F24x
TMS320LC240x
TMS320LF240x
TMS320F2823x
TMS320F2833x
TMS320C28xx
TMS320R28xx
TMS320F28xx
TMS320F2801x, 28044
TMS320F2802x, 3x Piccolo™
TMS320F2806x Piccolo™
TMS320F2833x Delfino™
TMS320C2834x Delfino™
TMS32028M35x Concerto™
Features
Supports all Texas Instruments C2000 MCU/DSPs
USB 2.0 high-speed port (480 Mbps) provides faster downloads
Programmable JTAG clock from 1KHz to 30 MHz (15MHz with
isolated adapter)
Powered by the USB port
–
no external power adapters needed
Supports Code Composer Studio 3.3, 4.x and 5.x
Includes Flash Programmer utility (does not need CCStudio)
Change JTAG clock even when the CCStudio is running
Detects and graphically shows all devices on the JTAG chain
Windows 7, XP and Vista compatible
Compatible with Code Composer Studio
JTAGjet-C2000 is fully compatible with Code Composer Studio
3.3 or newer. It installs directly into the Code Composer Studio
directories and becomes visible as JTAGjet Emulator in the
CCS Setup utility and preconfigured with many C2000 targets.
Setting up to work with JTAGjet is just as easy as setting up a
TI emulator
–
just drag and drop the preconfigured target and
emulator configuration and start Code Composer Studio.
JTAG Chain Device Detection
For custom made boards with more than one device on the
JTAG chain, JTAGjet can detect all devices on the chain which
is necessary in order to properly configure the CCS debugger.
What’s Included
JTAGjet emulator with USB 2.0 cable
JTAG cable with standard 14-pin fully electrically isolated JTAG
adapter
CD-ROM with CCStudio drivers & documentation
Flasher-C2000 programming utility
Variable JTAG Clock
JTAGjet-C2000 supports variable JTAG clocks which may be
set from 1 kHz (for slow FPGA prototypes or power saving
devices) to 30 MHz to provide faster application downloads and
quicker Flash programming
.
Ordering Information
Part Number
JTAGjet-C2000F-ISO
TMDSCCS-ALLN01
TMDSCCS-ALLF01
Description
Emulator with CCS drivers, Flasher-
C2000 and isolation adapter
Code Composer Studio ver 5.x (node
locked)
Code Composer Studio ver 5.x
(floating license)
Price
$895
$495
$795
Auto-sensing JTAG voltage
JTAGjet-C2000 comes with a fully isolated JTAG adapter to
protect from ground loops and electrical noises. The adapter
comes with 14-pin XDS510 & XDS560 compatible JTAG
header and supports targets from 3V to 5V. A non-isolated
adapter is available for faster JTAG speeds in necessary.
On-line store at
www.signum.com/c2000.htm
SIGNUM SYSTEMS
®
CORP.
1211 Flynn Rd., #104, Camarillo, CA 93012
Phone:
(805) 383-3682
Web:
www.signum.com
IAR SYSTEMS
®
INC.
1065 E. Hillsdale Blvd. #420, Foster City, CA 94404
Phone:
(650) 287-4250
Web:
www.iar.com
Flasher-C2000
™
Flash Programmer for
the TI C2000 Family of MCU/DSPs
Flasher-C2000
is a software utility that enables Signum
JTAGjet emulators to program the on-chip Flash memory of the
Texas Instruments F2000 DSP devices. This utility works stand-
alone and does not require the Code Composer Studio.
Supported Devices
Flasher-C2000 supports all C2000 MCU/DSP devices with on-
chip flash
:
TMS320F240
TMS320F241
TMS320F243
TMS320LF2401A
TMS320LF2402A
TMS320LF2403A
TMS320LF2406A
TMS320LF2407A
TMS320F2801/02
TMS320F2806
TMS320F2808
TMS320F2809
TMS320F2810/11/12
TMS320F28015/16
TMS320F28044
TMS320F2823x
TMS320F2833x, 34x Delfino™
TMS320F2802x, 3x,6x Piccolo™
TMS320F28M35x Concerto™
(available soon)
GUI Interface Mode
This mode displays a dialog box (pictured at right) that enables
the user to select the DSP to be programmed and set all the
programming parameters in a well designed and easy to
understand format. This graphical interface is very similar to the
one in CCStudio Flash Programmer plug-in, which practically
eliminates any learning curve for the users who are already
familiar with the Flash plug-in.
Flasher-C2000 Features
Command Line Mode
This mode of operation is ideal for any small or large production
environment in which the operator uses a batch flash task to
minimize human errors. The flash operation may be started by
clicking on a shortcut or called from an automated test system.
The creation of the batch file is very simple. Once a Flash
operation is created and tested using the GUI all the necessary
commands and arguments can be cut-and-pasted into a DOS
batch file. No learning of command syntax is needed and any
command errors are totally eliminated.
With the command mode, a F/W or algorithm vendor is able to
distribute flash images and algorithm updates to his customers
safely and economically. The flash image and the unlock
security passwords may be safely hidden in encrypted files and
decrypted only while programming by the Flasher software.
Programs on-chip Flash in all F24x, F240x and F28xxx
devices using the JTAGjet emulator
GUI and command driven interfaces
No CCStudio installation required
Fast programming & erase algorithms
Flash depletion recovery, blank check & save flash to file
Flash locking, unlocking & password programming
Support for encrypted passwords and COFF files
Support for HEX files for product serialization, etc.
Ordering Information
Part Number
Flasher-C2000
JTAGjet-C2000F-ISO
Description
Flash programming utility S/W
JTAG emulator w/ Flasher-C2000
Price
$250
$895
On-line store at
www.signum.com/c2000.htm
SIGNUM SYSTEMS
®
CORP.
1211 Flynn Rd., #104, Camarillo, CA 93012
Phone:
(805) 383-3682
Web:
www.signum.com
IAR SYSTEMS
®
INC.
1065 E. Hillsdale Blvd. #420, Foster City, CA 94404
Phone:
(650) 287-4250
Web:
www.iar.com
单片机
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
