Series/Type:
B82
The following products presented in this data sheet are being withdrawn.
Ordering Code
B82
B82
B82
B82
A00
A00
00
00
Substitute Product
Date of
Withdrawal
20
20
20
20
-
-
-
-
-
-
-1
-1
Deadline Last
Orders
0
0
0
0
-0 -31
-0 -31
-0 -31
-0 -31
Last Shipments
0
0
0
0
-0 -3
-0 -3
-0 -3
-0 -3
For further information please contact your nearest EPCOS sales office, which will also support
you in selecting a suitable substitute. The addresses of our worldwide sales network are
presented at www.epcos.com/sales.
VHF chokes
B82114
Rated voltage 500 V AC/DC
1)
Rated current max. 1 A
Construction
■
Round 6-aperture ferrite core
■
With or without insulating sleeve
Features
■
The selected core material provides maximum
impedance in the relevant frequency range of 50 to 200 MHz
■
An insulating sleeve prevents any turn-to-turn short circuits
■
Suitable for wave soldering
■
RoHS-compatible
Applications
■
Broadband interference suppression in electrical
systems and equipment in the RF and VHF range
■
Reduction of radiated interference in broadcasting and TV receivers
Terminals
■
Central axial leads
■
Base material Cu
■
Hot-dip tinned with pure tin
Delivery mode:
Bulk
Dimensional drawings
B82114R*A … (without insulating sleeve)
15 max.
Insulated
Insulated
45
_
10
10
_
0.5
45
_
10
IND0159-Z-E
6.5 max.
B82114R*C … (with insulating sleeve)
15 max.
Insulated
Insulated
IND0160-U-E
6.7 max.
Dimensions in mm
1) 500 V AC only with insulating sleeve
Please read
Cautions and warnings
and
Important notes
at the end of this document.
2
06/12
VHF chokes
B82114
Technical data and measuring conditions
Test voltage V
test
Rated current I
R
Resonance frequency f
res
Solderability (lead-free)
2500 V AC, 1 min (only for chokes with insulation)
Max. 1 A at ambient temperature +40 C
Measured with Agilent 4294A, +20 °C
Sn95.5Ag3.8Cu0.7: +(245 5) °C, (3 0.3) s
Wetting of soldering area 90%
(to IEC 60068-2-20, test Ta)
+(260 5) °C, 10 s
(to IEC 60068-2-20, test Tb)
25/085/04 (to IEC 60068-1)
Mounted: –25 °C … +85 °C
Packaged: –25 °C … +40 °C,
Approx. 1.65 g
75% RH
Resistance to soldering heat
(wave soldering)
Climatic category
Storage conditions
Weight
Characteristics and ordering codes
V
R
V AC/DC
—
Version
f
res
MHz
without
60
insulating sleeve 100
with
60
insulating sleeve 100
900
800
900
800
black
|Z|
at f
res
Color
code
Number Approx.
of turns weight
g
2.5
1.3
1.3
1.3
1.3
Ordering code
B82114R0000A004
B82114R0000A001
B82114R0000C004
B82114R0000C001
trans- 2.5
parent
black
2.5
trans- 2.5
parent
500
Please read
Cautions and warnings
and
Important notes
at the end of this document.
3
06/12
VHF chokes
B82114
Impedance |Z| versus frequency f
measured with impedance analyzer
Agilent 4294A, typical values at +20 °C
10
3
|Z|
Ω
IND0161-L
B82114
10
2
R*A004/C004 ( I
v
= 50 mA)
R*A001/C001 ( I
v
= 250 mA)
10
1 5
10
10
6
10
7
10
8
Hz 10
f
9
I
v
: DC magnetic bias
Please read
Cautions and warnings
and
Important notes
at the end of this document.
4
06/12
Cautions and warnings
■
Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■
If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
Washing processes may damage the product due to the possible static or cyclic mechanical
loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,
which might lead to reduced reliability or lifetime.
■
The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■
Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■
Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read
Cautions and warnings
and
Important notes
at the end of this document.
5
06/12
微控制器 MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
