Installing and using Nanoline
controllers
User manual
UM EN NLC
User manual
Installing and using Nanoline controllers
2015-07-15
Designation:
Revision:
UM EN NLC
O
This user manual is valid for:
Designation
Nanoline
Version
Order No.
PHOENIX CONTACT
2338_en_O
Please observe the following notes
User group of this manual
The use of products described in this manual is oriented exclusively to:
– Qualified electricians or persons instructed by them, who are familiar with applicable
standards and other regulations regarding electrical engineering and, in particular, the
relevant safety concepts.
– Qualified application programmers and software engineers, who are familiar with the
safety concepts of automation technology and applicable standards.
Explanation of symbols used and signal words
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety measures that follow this symbol to avoid possible in-
jury or death.
There are three different categories of personal injury that are indicated with a
signal word.
DANGER
WARNING
CAUTION
This indicates a hazardous situation which, if not avoided, will re-
sult in death or serious injury.
This indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
This indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
This symbol together with the signal word
NOTE
and the accompanying text
alert the reader to a situation which may cause damage or malfunction to the
device, hardware/software, or surrounding property.
This symbol and the accompanying text provide the reader with additional in-
formation or refer to detailed sources of information.
How to contact us
Internet
Up-to-date information on Phoenix Contact products and our Terms and Conditions can be
found on the Internet at:
phoenixcontact.com
Make sure you always use the latest documentation.
It can be downloaded at:
phoenixcontact.net/products
Subsidiaries
If there are any problems that cannot be solved using the documentation, please contact
your Phoenix Contact subsidiary.
Subsidiary contact information is available at
phoenixcontact.com.
PHOENIX CONTACT GmbH & Co. KG
Flachsmarktstraße 8
32825 Blomberg
GERMANY
Should you have any suggestions or recommendations for improvement of the contents and
layout of our manuals, please send your comments to:
tecdoc@phoenixcontact.com
Published by
PHOENIX CONTACT
Please observe the following notes
General terms and conditions of use for technical documentation
Phoenix Contact reserves the right to alter, correct, and/or improve the technical documen-
tation and the products described in the technical documentation at its own discretion and
without giving prior notice, insofar as this is reasonable for the user. The same applies to any
technical changes that serve the purpose of technical progress.
The receipt of technical documentation (in particular user documentation) does not consti-
tute any further duty on the part of Phoenix Contact to furnish information on modifications
to products and/or technical documentation. You are responsible to verify the suitability and
intended use of the products in your specific application, in particular with regard to observ-
ing the applicable standards and regulations. All information made available in the technical
data is supplied without any accompanying guarantee, whether expressly mentioned, im-
plied or tacitly assumed.
In general, the provisions of the current standard Terms and Conditions of Phoenix Contact
apply exclusively, in particular as concerns any warranty liability.
This manual, including all illustrations contained herein, is copyright protected. Any
changes to the contents or the publication of extracts of this document is prohibited.
Phoenix Contact reserves the right to register its own intellectual property rights for the
product identifications of Phoenix Contact products that are used here. Registration of such
intellectual property rights by third parties is prohibited.
Other product identifications may be afforded legal protection, even where they may not be
indicated as such.
PHOENIX CONTACT
Table of contents
1
Overview.....................................................................................................................................5
1.1
Components .......................................................................................................... 5
1.1.1
Nanoline base unit ................................................................................. 6
1.1.2
I/O expansion modules .......................................................................... 6
1.1.3
Communication expansion modules ...................................................... 7
1.1.4
Option module ....................................................................................... 7
Operator Panel ...................................................................................................... 8
1.2.1
NLC-OP1-LCD-032-4X20 ...................................................................... 8
1.2.2
NLC-OP2-LCD-076-4X20 ...................................................................... 9
nanoNavigator programming software................................................................. 10
1.2
1.3
2
Installation and connection of Nanoline components................................................................11
2.1
Base and expansion module installation.............................................................. 11
2.1.1
Installing modules on the mounting rail ............................................... 11
2.1.2
Removing modules from the mounting rail ........................................... 13
Option modules ................................................................................................... 14
2.2.1
RS-232 connections ............................................................................ 16
2.2.2
RS-485 connections ............................................................................ 16
2.2.3
Modbus network connection (NLC-03… only) ..................................... 17
2.2.4
USB connections ................................................................................. 18
Operator Panel .................................................................................................... 18
2.3.1
Local installation .................................................................................. 19
2.3.2
Remote installation .............................................................................. 19
Connecting power, inputs and outputs ................................................................ 24
2.4.1
Power ................................................................................................... 25
2.4.2
Digital inputs ........................................................................................ 26
2.4.3
Digital outputs ...................................................................................... 27
2.4.4
Analog inputs ....................................................................................... 28
2.4.5
Analog outputs ..................................................................................... 28
2.4.6
Relay outputs ....................................................................................... 29
2.4.7
Temperature inputs .............................................................................. 32
LED indicators ..................................................................................................... 33
2.5.1
Base unit .............................................................................................. 33
2.2
2.3
2.4
2.5
3
Communication.........................................................................................................................35
3.1
Serial connections ............................................................................................... 35
3.1.1
RS-232 ................................................................................................. 36
3.1.2
RS-485 ................................................................................................. 37
3.1.3
USB ..................................................................................................... 37
3.1.4
Memory Module ................................................................................... 37
Ethernet communication...................................................................................... 39
3.2.1
LEDs .................................................................................................... 40
3.2.2
Communications watchdog .................................................................. 40
3.2
2338_en_O
PHOENIX CONTACT
1
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
