Joysticks
SERIES 67A
Hall Effect Joystick
FEATURES
• Proportional output
• Shaft and panel seal to IP67
• Compact: 1-inch square flange
• Long operational life
• RoHS compliant
APPLICATIONS
• Medical
• Military vehicles and devices
• Mobile electronics for outdoor use
DIMENSIONS
in inches (and millimeters)
TRIANGLE INDICATES +Y DIRECTION
FOR JOYSTICK OUTPUT
1.300
[33,02]
SQUARE
1.000
[25,4]
SQUARE
C-BORE, 4 PLACES
.180
[4,57]
.070
[1,78]
1.000
[25,4]
SQUARE
.500
[12,7]
TYP.
[
1.007 .003
25,58 0,07]
4X HOLE FOR #2 SCREW,
SELF-TAPPING OR MACHINE THREAD
.100
[2,54]
4 PLACES
R.100
[2,54]
4 PLACES
RECOMMENDED PANEL CUTOUT
(0,1)
(-80,0)
(-1,0)
SLEEP
ZONE
(0,-1)
(1,0)
+X
(80,0)
-20
-5
JOYSTICK OUTPUT
ALONG X OR Y AXIS
Joysticks
JOYSTICK
OPERATIONAL LIMITS
SHAFT TRAVEL
20
ANY DIRECTION
1.115
[28,32]
.520
[13,21]
.120
[3,05]
MOUNTING SURFACE
.727
±
.015
[ 18,47 0,38
1.000
[25,4]
.570 .015
[14,48 0,38]
]
.087
[2,21]
SHAFT PIVOT POINT
PIN HEADER VERSION
CONNECTOR IS
AMP, P/N 7-215083-6
TRIANGLE MARKING ON MOUNTING BRACKET
INDICATES +Y DIRECTION FOR JOYSTICK OUTPUT
+Y
(0,80)
JOYSTICK
OUTPUT WAVEFORM
80
-X
5
DEGREES SHAFT TRAVEL, °
20
NOT TO SCALE
(0,-80)
-Y
-80
NOT TO SCALE
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois
60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Joysticks
SPECIFICATIONS
Electrical Ratings
Supply Voltage (VVD):
3.3V ± .0.3V
High Level Input Voltage (VIH, Min):
0.7*VDD on SCL & SDA / 0.25*VDD+0.8 on
Aln
Low Level Input Voltage (VIL, Max):
0.3*VDD on SCL & SDA / 0.15*VDD on Aln
Current Draw In Active Mode (IDDI):
3mA
Maximum @ VDD = 3.3V
Current Draw In Sleep Mode (IDD2):
100uA
Maximum @ VDD = 3.3V
Maximum Current Sunk By Any I/O Pin:
25mA
Leakage Current:
±5 nA Typ., ±125 nA Max
Low Level Output Voltage (VOL):
0.6V On
INTn & SDA @ IOL = 6mA, @ VDD = 3.3V
Measurement Frequency (Active Mode):
50
Samples/Sec
Response Time, Active Mode (T1):
20ms*
Response Time, Sleep Mode (T2):
80ms*
Output @ Maximum Joystick Deflection
(XMax, YMax):
80 Units
Output With Joystick Shaft Released (Cen-
ter Position):
(0,0)
Nominal Startup Time (TP, W):
300ms, Max
Storage High Temperature: +100°C,
Tested per IEC 68-2-2, Method Ba
Physical & Mechanical Ratings
Storage Low Temperature:
-55°C,
Vibration:
Random, Tested per MIL-STD-810G,
Tested per IEC 68-2-1, Method Aa
Method 514.6, Procedure I
Humidity:
Tested per MIL-STD 202,
Mechanical Shock:
Tested per MIL-STD 202,
Method 103B
Method 213B Test Condition A
Transit Drop:
Tested per MIL-ST-810G, Method
Humidity, 85/85:
Tested per MIL-STD 202,
Method 103B, 500 hours
516.6, Procedure II
Solar Radiation:
Tested per MIL-STD 810G,
Method 505.5, Procedure II
Terminal Strength:
10 lbs. Minimum, Tested
per MIL-STD-202, Method 211A
Chemical Resistance:
Tested per
Push-Out Force:
60 lbs. Minimum
ISO 16750-5
Pull-Out Force:
60 lbs. Minimum
Dielectric:
Tested per MIL-STD 202G,
Shaft Impact:
0.5 lbs. Weight dropped 20x
Method 301
from height of 1m
Insulation Resistance:
Tested per MIL-STD
Shaft Side-Load:
45 lbs. Minimum
202G, Method 302
Mounting Torque:
3-5 in-lbs recommended, 8
in-lbs. Maximum
EMC Ratings
Joystick Life:
1 million cycles minimum**
Radiated Immunity:
Tested per IEC 61000-4-3
Environmental Ratings
Conducted Immunity:
Seal:
IP67, Tested per IEC 60529
Tested per IEC 61000-4-6
Altitude:
Tested per MIL-STD 202,
Radiated Emissions:
Tested per ANSI C63.4
Method 105C
Conducted Emissions:
Thermal Shock:
Tested per MIL-STD 202,
Tested per EN 55022
Method 107G
Electrostatic Discharge:
Operating High Temperature: +85°C,
Tested per IEC 61000-4-2
Tested per IEC 68-2-14, Test Na
Power Frequency Magnetic Field:
Operating Low Temperature:
-40°C,
Tested per IEC 61000-4-8
Tested per IEC 68-2-14, Test Na
Optical Joysticks
and Mechanical
Encoders
Block Diagram
*Response time is the time from joystick movement to when new X,Y position data is available.
**One cycle is defined as a complete revolution of the shaft around the fixed perimeter, or one actuation in each of the 4 main directions, with return to center between each actuation.
ORDERING INFORMATION
Grayhill Series Number
Number of Axes: D = Dual Axis (X&Y)
Knob Style: F = Fingertip
67A - DF- 3C - 030C
Termination: C = .050 Cable with Connector, P = .050 Pin Header
Cable Length: 020 = 2.0 inches through 6.0 inches (060). 1 inch increments
Leave blank if pinned. Example: 67A-DF-3C-P
Interface: C = 12C
Voltage: 3 = 3.3V
For prices and custom configurations, contact a local sales office, an authorized distributor, or Grayhill's sales department.
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois
60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
