The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
2.5mm Pitch Board to Board Vertical Post Header
MDF14A Series
Dec.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
■Features
1. Service Efficiency Up contact and contact.
The post header is developed in the special design capable
of vertically connecting the board unnecessary for insertion
or extraction.
The post header can be connected in combination of the
receptacle with the plug at low cost.
2. Current Capacity [5A]
By adopting the 0.8mm round pin as the post pin, the pin
strength can be enhanced as well as the current capacity
can be maintained at 5A approximately.
3. Board Pre-fixed Mechanism
The kink process is provided for the board pre-fix process.
4. Pin Extraction Specification
The post header corresponds to individual pin extraction
specifications.
Kink process
■Applications
Various power supply units, and secondary power unit for
the set
B166
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
MDF14A Series●2.5mm Pitch Board to Board Vertical Post Header
■Product
Specifications
Rating
Current rating : 5A
Operating Temperature Range: -30
to
+85ç (Note 1) Storage Temperature Range: -10
to
+60ç(Note 2)
Storage Moisture Range: 40
to
70%
(Note 2)
Voltage rating : 250V AC Operating Moisture Range: 40
to
80%
Item
1. Insulation Resistance
2. Withstanding voltage
3. Vibration
1000M
ohms
min.
Specification
500V DC
1500V AC/1 minute
No flashover or insulation breakdown.
No damage, cracks, or parts looseness.
Condition
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40 ± 2ç and humidity of 90% to 95%
(-55ç: 30 minutes→5
to
35ç: 10 minutes max.→
(-85ç:
30 minutes→5
to
35ç: 10 minutes max.) 5 cycles
Flow: 260ç for 10 seconds
Manual soldering: 350ç for 3 seconds
Dec.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
4.
Humidity (Steady state)
Insulation resistance: 1000M
ohms
min.
5. Temperature Cycle
No damage, cracks, or parts looseness.
6. Resistance to Soldering heat
No deformation of components affecting performance.
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
■Material
Product
Pin Header
Part
Insulator
Contact
Material
Polyamide
Brass
Finish
Beige
Tin plated
Remarks
UL94V-0
________
Note: Hirose's tin plating process takes measures against whisker.
■Ordering
Information
●Connector
MDF14A
q
q
Series Name
e
Connector Type
P : Pin Header
-
*
P - 2.5 DS
(05)
w
e
r
t
r
Contact pitch: 2.5mm
t
Connection Type
DS : Right Angle
y
Contact Surface Finish / Packaging Type
(05) : Tin plated, 100 pcs. per bag
: MDF 14A
w
Number of contacts: 4
to
10
B167
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued,
Pitch
be discontinued
Board Vertical Post Header
on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
MDF14A Series●2.5mm
or will
Board to
soon. Please check the products status
■Pin
Header
●Applicable
Through-hole Diameter :
Ø1.0
+0.1
+0
Dec.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
BApplication
Pattern
Note:The kink process is alternately performed in
optional directions.
Unit: mm
Part Number
MDF14A- 4P-2.5DS
(05)
MDF14A- 5P-2.5DS
(05)
MDF14A- 6P-2.5DS
(05)
MDF14A- 7P-2.5DS
(05)
MDF14A- 8P-2.5DS
(05)
MDF14A- 9P-2.5DS
(05)
MDF14A-10P-2.5DS
(05)
CL No.
547-0242-4-
05
547-0241-1-
05
547-0240-9-
05
547-0239-0-
05
547-0238-7-
05
547-0237-4-
05
547-0236-1-
05
Number of Contacts
4
5
6
7
8
9
10
A
10.0
12.5
15.0
17.5
20.0
22.5
25.0
B
7.5
10.0
12.5
15.0
17.5
20.0
22.5
YES
RoHS
[Specific No.]
–
* *
,
(*
*)
(05)
:Tin plated, 100 pcs. per bag
Note: A packaging quantity is delivered by the bag unit (100 pcs.). If needed,
SynQor推出超小的病人全接触型400W医疗电源模块,该电源模块的封装为3×5×1.44,功率密度高达18.3W/立方英寸,转换效率达91%。 SynQor通过推出首款专门针对医疗应用而研制的AC/DC电源模块,使得公司的多元化战略持续成功地延伸至新的医疗领域。ACuQor模块系列实现了在3×5×1.44有限尺寸上提供400W的有用功率。SynQor可以提供48V,36V or 24V的...[详细]