HCPL-4504/J454/0454, HCNW4504
High CMR, High Speed Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The HCPL-4504 and HCPL-0454 contain a GaAsP LED
while the HCPL-J454 and HCNW4504 contain an AlGaAs
LED. The LED is optically coupled to an integrated high
gain photo detector.
The HCPL-4504 series has short propagation delays and
high CTR. The HCPL-4504 series also has a guaranteed
propagation delay difference (t
PLH
-t
PHL
). These features
make the HCPL-4504 series an excellent solution to IPM
inverter dead time and other switching problems. The
CTR, propagation delay, and CMR are specified both for
TTL and IPM conditions which are provided for ease of
application. These single channel, diode-transistor opto-
couplers are available in 8-Pin DIP, SO-8, and Widebody
package configurations. An insulating layer between a
LED and an integrated photodetector provide electrical
insulation between input and output. Separate connec-
tions for the photodiode bias and output-transistor col-
lector increase the speed up to a hundred times that of
a conventional phototransistor coupler by reducing the
base collector capacitance.
Features
•
Short propagation delays for TTL and IPM applications
•
15 kV/µs minimum Common Mode Transient immu-
nity at V
CM
= 1500 V for TTL/load drive
•
High CTR at T
A
= 25°C
>25% for HCPL-4504/0454
>23% for HCNW4504
>19% for HCPL-J454
•
Electrical specifications for common IPM applications
•
TTL compatible
•
Open collector output
•
Safety approval:
UL recognized
– 3750 V rms/1min. for HCPL-4504/0454/J454
– 5000 V rms/1min. for HCPL-4504 Option 020 and
HCNW4504
CSA approved
IEC/EN/DIN EN 60747-5-2 approved
– V
IORM
= 560 Vpeak for HCPL-0454 Option 060
– V
IORM
= 630 Vpeak for HCPL-4504 Option 060
– V
IORM
= 891 Vpeak for HCPL-J454
– V
IORM
= 1414 Vpeak for HCNW4504
Functional Diagram
NC 1
ANODE 2
CATHODE 3
NC 4
8 V
CC
7 NC
6 V
O
5 GND
Applications
TRUTH TABLE
LED
V
O
ON
LOW
OFF
HIGH
A 0.1 µF bypass capacitor between pins 5 and 8 is recommended.
Schematic
I
CC
8
V
CC
ANODE
+
2
V
F
–
3
I
F
HCPL-4504 Functional Diagram
•
Inverter circuits and Intelligent Power Module (IPM)
interfacing: High Common Mode Transient immunity
(> 10 kV/µs for an IPM load/drive) and (t
PLH
- t
PHL
)
Specified (see Power Inverter Dead Time section)
•
Line receivers: Short propagation delays and low in-
put-output capacitance
•
High speed logic ground isolation: TTL/TTL, TTL/
CMOS, TTL/LSTTL
•
Replaces pulse transformers: Save board space and
weight
•
Analog signal ground isolation: Integrated photode-
tector provides improved linearity over phototransis-
tors
I
O
6
CATHODE
V
O
SHIELD
5
GND
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
HCPL-4504 Schematic
Ordering Information
HCPL-0454, HCPL-4504 and HCPL-J454 are UL Recognized with 3750 Vrms for 1 minute per UL1577.
HCNW4504 is UL Recognized with 5000 Vrms for 1 minute per UL1577. HCPL-0454, HCPL-4504, HCPL-J454 and
HCNW4504 are approved under CSA Component Acceptance Notice #5, File CA 88324.
Option
RoHS
non RoHS
Compliant Compliant
-000E
-300E
-500E
-020E
HCPL-4504
-320E
-520E
-060E
-360E
-560E
-000E
-300E
HCPL-J454
-400E
-500E
-600E
-000E
HCPL-0454
-500E
-060E
-560E
-000E
HCNW4504
-300E
-500E
no option
#300
#500
#020
#320
#520
#060
#360
#560
no option
#300
NA
#500
NA
no option
#500
#060
#560
no option
#300
#500
400 mil
Widebody
DIP-8
SO-8
300 mil
DIP-8
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
300 mil
DIP-8
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Part
Number
Package
Surface
Mount
Gull
Wing
Tape
& Reel
UL 1577
5000 Vrms/
1 Minute
rating
IEC/EN/DIN
EN 60747-5-2
Quantity
50 per tube
50 per tube
1000 per reel
50 per tube
50 per tube
1000 per reel
50 per tube
50 per tube
1000 per reel
50 per tube
50 per tube
50 per tube
1000 per reel
750 per reel
100 per tube
1500 per reel
100 per tube
1500 per reel
42 per tube
42 per tube
750 per reel
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
HCPL-4504-560E to order product of 300 mil DIP Gull Wing Surface Mount package in Tape and Reel packaging
with IEC/EN/DIN EN 60747-5-2 Safety Approval and RoHS compliant.
Example 2:
HCPL-4504 to order product of 300 mil DIP package in Tube packaging and non RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since July 15, 2001 and
RoHS compliant will use ‘–XXXE.’
2
Package Outline Drawings
HCPL-4504 Outline Drawing
9.65 ± 0.25
(0.380 ± 0.010)
TYPE NUMBER
8
7
6
5
OPTION CODE*
DATE CODE
7.62 ± 0.25
(0.300 ± 0.010)
6.35 ± 0.25
(0.250 ± 0.010)
A XXXXZ
LOT ID
1
1.19 (0.047) MAX.
YYWW
RU
EEE
2
3
4
UL
RECOGNITION
1.78 (0.070) MAX.
5° TYP.
+ 0.076
- 0.051
+ 0.003)
(0.010
- 0.002)
0.254
3.56 ± 0.13
(0.140 ± 0.005)
4.70 (0.185) MAX.
0.51 (0.020) MIN.
2.92 (0.115) MIN.
1.080 ± 0.320
(0.043 ± 0.013)
0.65 (0.025) MAX.
2.54 ± 0.25
(0.100 ± 0.010)
DIMENSIONS IN MILLIMETERS AND (INCHES).
* MARKING CODE LETTER FOR OPTION NUMBERS
"L" = OPTION 020
"V" = OPTION 060
OPTION NUMBERS 300 AND 500 NOT MARKED.
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
HCPL-4504 Gull Wing Surface Mount Option 300 Outline Drawing
LAND PATTERN RECOMMENDATION
9.65 ± 0.25
(0.380 ± 0.010)
8
7
6
5
1.016 (0.040)
6.350 ± 0.25
(0.250 ± 0.010)
10.9 (0.430)
1
2
3
4
1.27 (0.050)
1.780
(0.070)
MAX.
9.65 ± 0.25
(0.380 ± 0.010)
7.62 ± 0.25
(0.300 ± 0.010)
2.0 (0.080)
1.19
(0.047)
MAX.
0.254
(0.010
3.56 ± 0.13
(0.140 ± 0.005)
0.076
0.051
0.003)
0.002)
1.080 ± 0.320
(0.043 ± 0.013)
0.635 ± 0.130
2.54
(0.025 ± 0.005)
(0.100)
BSC
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARIT
0.10
(0.004 INCHES).
NOTE
LOATIN LEAD PROTR SION IS 0.25
(10
0.635 ± 0.25
(0.025 ± 0.010)
12° NOM.
) MAX.
3
Package Outline Drawings
HCPL-J454 Outline Drawing
9.80 ± 0.25
(0.386 ± 0.010)
TYPE NUMBER
8
7
6
5
DATE CODE
7.62 ± 0.25
(0.300 ± 0.010)
6.35 ± 0.25
(0.250 ± 0.010)
A XXXX
LOT ID
1
1.19 (0.047) MAX.
YYWW
RU
EEE
2
3
4
UL
RECOGNITION
1.78 (0.070) MAX.
5 TYP.
+ 0.076
0.254 - 0.051
+ 0.003)
(0.010 - 0.002)
3.56 ± 0.13
(0.140 ± 0.005)
4.70 (0.185) MAX.
0.51 (0.020) MIN.
2.92 (0.115) MIN.
1.080 ± 0.320
(0.043 ± 0.013)
0.65 (0.025) MAX.
2.54 ± 0.25
(0.100 ± 0.010)
DIMENSIONS IN MILLIMETERS AND (INCHES).
OPTION NUMBERS 300 AND 500 NOT MARKED.
NOTE: FLOATING LEAD PROTRUSION IS 0.5 mm (20 mils) MAX.
HCPL-J454 Gull Wing Surface Mount Option 300 Outline Drawing
LAND PATTERN RECOMMENDATION
9.80 ± 0.25
(0.386 ± 0.010)
8
7
6
5
1.016 (0.040)
6.350 ± 0.25
(0.250 ± 0.010)
10.9 (0.430)
1
2
3
4
1.27 (0.050)
1.780
(0.070)
MAX.
9.65 ± 0.25
(0.380 ± 0.010)
7.62 ± 0.25
(0.300 ± 0.010)
2.0 (0.080)
1.19
(0.047)
MAX.
0.254
(0.010
3.56 ± 0.13
(0.140 ± 0.005)
0.076
0.051
0.003)
0.002)
1.080 ± 0.320
(0.043 ± 0.013)
0.635 ± 0.130
2.54
(0.025 ± 0.005)
(0.100)
BSC
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).
NOTE
LOATIN LEAD PROTR SION IS 0.5 mm (20 m
0.635 ± 0.25
(0.025 ± 0.010)
12° NOM.
) MAX.
4
HCPL-J454-400E/600E Widelead Gullwing Surface Mount Outline Drawing
LAND PATTERN RECOMMENDATION
[9.80±0.25]
0.386 ±0.010
[1.016]
0.040
TYPE NUMBER
DATE CODE
LOT ID
A XXXX
YYWW
RU
EEE
[6.35 ±0.25]
0.250±0.010
UL
RECOGNITION
[0.65] 0.025 MAX
[1.19]
0.047
MAX.
[3.56±0.13]
0.140±0.005
[1.080] ± 0.320
0.043 ± 0.013
[2.54]
0.100
BSC
DIMENSIONS IN [MILLIMETERS] INCHES
OPTION NUMBERS 400 AND 600 NOT MARKED.
NOTE: FLOATING LEAD PROTRUSION IS 0.5 mm (20 mils) MAX.
[0.152] 0.006
[0.406] 0.016
[1.27]
0.050
[12.9]
0.508
[2.0]
0.08
[11.75 ± 0.25]
0.460 ± 0.010
[7.62±0.51]
0.300 ±0.020
[0.20] 0.008
[0.33] 0.013
[0.625±0.254]
0.025 ±0.010
30°
NOM.
LEAD COPLANARITY
MAXIMUM: [0.102] 0.004
HCPL-0454 Outline Drawing (8-Pin Small Outline Package)
LAND PATTERN RECOMMENDATION
8
3.937 ± 0.127
(0.155 ± 0.005)
PIN ONE
0.406 ± 0.076
(0.016 ± 0.003)
1
7
6
XXX
YWW
EEE
5
5.994 ± 0.203
(0.236 ± 0.008)
TYPE NUMBER (LAST 3 DIGITS)
DATE CODE
LOT ID
7.49 (0.295)
2
3
4
1.9 (0.075)
1.270 BSC
(0.050)
* 5.080 ± 0.127
(0.200 ± 0.005)
7
45 X
0.64 (0.025)
0.432
(0.017)
3.175 ± 0.127
(0.125 ± 0.005)
1.524
(0.060)
0~7
0.228 ± 0.025
(0.009 ± 0.001)
0.203 ± 0.102
(0.008 ± 0.004)
0.305 MIN.
(0.012)
* TOTAL PACKAGE LENGTH (INCLUSIVE OF MOLD FLASH)
5.207 ± 0.254 (0.205 ± 0.010)
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES) MAX.
NOTE: FLOATING LEAD PROTRUSION IS 0.15 mm (6 mils) MAX.
5
聊聊、笑笑、闹闹
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
