CALL 512-863-5585
x6400
CONTACT CUSTOMER SERVICE
The AirBorn stackable compliant connector family is one of
AirBorn’s solutions for high-density, board-to-board stack-
ing applications. This connector family is available in 0.075”
contact spacing and 100 Ω and 85 Ω differential serial buses.
•
Wide variety of standard pin/tail lengths accom-
modate any board-to-board spacing
•
0.075” contact spacing
•
Reliable “eye of the needle”-compliant section
design eliminates soldering
temperature alloy)
•
BeCu contacts (special high-conductivity, high-
•
Very robust socket contact (low-stress design)
•
Individually repairable contacts
www.airborn.com
1
RC-CVR-A
(512 ) 863-5585
CALL 512-863-5585
x6400
DIMENSIONS
CONTACT CUSTOMER SERVICE
RC422 - Full Profile Board-to-Board
Stackable Connector
Contact spacing: 0.075” (1.91 mm)
A full bodied high-density press-fit connector.
Uses a patented female/compliant/male stacking
contact system. Used in board-to-board stacking
applications.
PLEASE CONSULT THE AIRBORN WEBSITE FOR THE LATEST REVISION OF THIS DOCUMENT PRIOR TO BEGINNING ANY DESIGN WORK.
Sample Part Number Format: RC422-052-211-4000
RC422
SERIES
Stackable
Compliant
Full-Profile
4 Rows
0.075” Spacing
CONFIGURATION
028 – 4 Rows/7 Columns
052 – 4 Rows/13 Columns
076 – 4 Rows/19 Columns
100 – 4 Rows/25 Columns
128 – 4 Rows/32 Columns
152 – 4 Rows/38 Columns
200 – 4 Rows/50 Columns
252 – 4 Rows/63 Columns
300 – 4 Rows/75 Columns
PLATING
1
–
50 µ” Au
3
–
30 µ” Au
7
–
50 µ” Au / 20 µ” Au
9
–
30 µ” Au / 20 µ” Au
CONTACT
10 – 0.095” Long
20
–
0.270” Long
21
–
0.300” Long
22
–
0.400” Long
23
–
0.500” Long
24
–
0.700” Long
25
–
0.800” Long
26
–
0.900” Long
27
–
0.600” Long
28
–
1.000” Long
30 – 0.270” Long
31 – 0.300” Long
32 – 0.400” Long
33 – 0.500” Long
34 – 0.700” Long
35 – 0.800” Long
36 – 0.900” Long
37 – 0.600” Long
38 – 1.000” Long
TYPE
00
–
None
FT
–
Female thread
MT
–
Male thread
(#39 hardware, only)
HARDWARE
30
–
0.195” Long (use with #10 contact)
39
–
0.370” Long (use with #20 contact)
40
–
0.400” Long (use with #21 contact)
41
–
0.500” Long (use with #22 contact)
42
–
0.600” Long (use with #23 contact)
43
–
0.800” Long (use with #24 contact)
44
–
0.900” Long (use with #25 contact)
45
–
1.000” Long (use with #26 contact)
46
–
0.700” Long (use with #27 contact)
47
–
1.100” Long (use with #28 contact)
VARIATION
Blank
–
None
XXX
–
Consult factory
PLEASE CONSULT THE AIRBORN WEBSITE FOR THE LATEST REVISION OF THIS DOCUMENT PRIOR TO BEGINNING ANY DESIGN WORK.
MATED HEIGHT
The connector body height is 0.300” and, when used with the -20 or -30 (0.270”) contact, the
mounting is flush (board-bottom-mounted to connector top). This board-bottom to connector-top
spacing can be modified based on the contact selected by approximately the difference in pin
length (see Table 2 in top window) .
MATERIALS and FINISHES
Contact: . . . . . . . . . . . . . . . . . . . . . . . . . . . . BeCu per ASTM B768 (BeCu C17410 brush alloy 174)
Contact Finish: . . . . . . . . . . . . . . . . . . . . . . Gold per MIL-G-45204 over nickel per IAW QQ-N-290
Molded Insulator: . . . . . . . . . . . . . . . . .
Glass-filled polyphenylene sulfide (PPS) per MIL-M-24519
Hardware: . . . . . . . . . . . . . . . . . . . . . . . Stainless steel per ASTM A582, passivated per ASTM 967
Guide Pin/Socket:
. . . . . . . . . . . . . . . . . . .
BeCu per ASTM B196/197, nickel-plated per QQ-N-290
NOTE: AirBorn can manufacture special configurations to your exact specifications.
PERFORMANCE
SI DATA – Differential 100 Ohm
1
2
3
4
Diff . Insertion Loss
Diff . Return Loss
NEXT
FEXT
5 .0 GHz @ -3 dB
2 .0 GHz @ -8 dB
4 .0 GHz @ -25 dB
4 .0 GHz @ -35 dB
Contact Rating: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 amperes
Operating Temperature: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65° C to +125° C
Insulation Resistance: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5,000 megaohms minimum @ 500 VDC
Durability: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 connector mating cycles
Contact Resistance: . . . . . . . . . . . . . . . . . . . . . . . . . . 3 to 5 milliohms (contact length-dependent)
Contact Engagement Force: . . . . . . . . . . . . . . . . . . . . .
4.0 oz (113 g) max. w/0.0246” dia. test pin
Contact Separation Force: . . . . . . . . . . . . . . . . . . . . . . . .
0.5 oz (14 g) min. w/0.0226” dia. test pin
Compliant Insertion Force: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 .5 lb (10 .21 Kg) max . per contact
Compliant Removal Force: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 .5 lb (2 .04 Kg) min . per contact
www.airborn.com
2
RC422-PNB-1F
(512 ) 863-5585
CALL 512-863-5585
x6400
DIMENSIONS
CONTACT CUSTOMER SERVICE
RC422 - Bottom-of-Stack Board
Mount Connector
Contact spacing: 0.075” (1.91 mm)
A full bodied high-density press-fit connector.
Uses a patented female/compliant/male stacking
contact system. Used at the bottom of the stack
in board-to-board stacking applications.
Sample Part Number Format: RC422-052-101-3000
RC422
SERIES
Stackable
Compliant
Full-Profile
4 Rows
0.075” Spacing
CONFIGURATION
028 – 4 Rows/7 Columns
052 – 4 Rows/13 Columns
076 – 4 Rows/19 Columns
100 – 4 Rows/25 Columns
128 – 4 Rows/32 Columns
152 – 4 Rows/38 Columns
200 – 4 Rows/50 Columns
252 – 4 Rows/63 Columns
300 – 4 Rows/75 Columns
PLATING
1
–
50 µ” Au
3
–
30 µ” Au
7
–
50 µ” Au / 20 µ” Au
9
–
30 µ” Au / 20 µ” Au
CONTACT
10 - 0.095” Long
HARDWARE
30 - 0.195” Long
(use with #10
contact)
TYPE
00
–
None
FT
–
Female thread
VARIATION
Blank
–
None
XXX
–
Consult factory
PLEASE CONSULT THE AIRBORN WEBSITE FOR THE LATEST REVISION OF THIS DOCUMENT PRIOR TO BEGINNING ANY DESIGN WORK.
MATED HEIGHT
The connector body height is 0.300” and, when used with the -20 or -30 (0.270”) contact, the
mounting is flush (board-bottom-mounted to connector top). This board-bottom to connector-top
spacing can be modified based on the contact selected by approximately the difference in pin
length (see Table 2 in top window) .
MATERIALS and FINISHES
Contact: . . . . . . . . . . . . . . . . . . . . . . . . . . . . BeCu per ASTM B768 (BeCu C17410 brush alloy 174)
Contact Finish: . . . . . . . . . . . . . . . . . . . . . . Gold per MIL-G-45204 over nickel per IAW QQ-N-290
Molded Insulator: . . . . . . . . . . . . . . . . .
Glass-filled polyphenylene sulfide (PPS) per MIL-M-24519
Hardware: . . . . . . . . . . . . . . . . . . . . . . . Stainless steel per ASTM A582, passivated per ASTM 967
Guide Pin/Socket:
. . . . . . . . . . . . . . . . . . .
BeCu per ASTM B196/197, nickel-plated per QQ-N-290
NOTE: AirBorn can manufacture special configurations to your exact specifications.
PERFORMANCE
SI DATA – Differential 100 Ohm
1
2
3
4
Diff . Insertion Loss
Diff . Return Loss
NEXT
FEXT
5 .0 GHz @ -3 dB
2 .0 GHz @ -8 dB
4 .0 GHz @ -25 dB
4 .0 GHz @ -35 dB
Contact Rating: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 amperes
Operating Temperature: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65° C to +125° C
Insulation Resistance: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5,000 megaohms minimum @ 500 VDC
Durability: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 connector mating cycles
Contact Resistance: . . . . . . . . . . . . . . . . . . . . . . . . . . 3 to 5 milliohms (contact length-dependent)
Contact Engagement Force: . . . . . . . . . . . . . . . . . . . . .
4.0 oz (113 g) max. w/0.0246” dia. test pin
Contact Separation Force: . . . . . . . . . . . . . . . . . . . . . . . .
0.5 oz (14 g) min. w/0.0226” dia. test pin
Compliant Insertion Force: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 .5 lb (10 .21 Kg) max . per contact
Compliant Removal Force: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 .5 lb (2 .04 Kg) min . per contact
www.airborn.com
(512 ) 863-5585
RC422-PNB-2E
3
CALL 512-863-5585
x6400
DIMENSIONS
CONTACT CUSTOMER SERVICE
RC442 - Low Profile Board-to-
Board Stackable Connector
Contact spacing: 0.075” (1.91 mm)
A low profile bodied, high-density press-fit con-
nector. Uses a patented female/compliant/male
stacking contact system. Used in board-to-board
stacking applications.
PLEASE CONSULT THE AIRBORN WEBSITE FOR THE LATEST REVISION OF THIS DOCUMENT PRIOR TO BEGINNING ANY DESIGN WORK.
Sample Part Number Format: RC442-052-311-4000
RC442
SERIES
Stackable
Compliant
Low-Profile
4 Rows
0.075” Spacing
CONFIGURATION
028 – 4 Rows/7 Columns
052 – 4 Rows/13 Columns
076 – 4 Rows/19 Columns
100 – 4 Rows/25 Columns
128 – 4 Rows/32 Columns
152 – 4 Rows/38 Columns
200 – 4 Rows/50 Columns
252 – 4 Rows/63 Columns
300 – 4 Rows/75 Columns
PLATING
1
–
50 µ” Au
3
–
30 µ” Au
7
–
50 µ” Au / 20 µ” Au
9
–
30 µ” Au / 20 µ” Au
TYPE
00
–
None
VARIATION
Blank
–
None
XXX
–
Consult factory
CONTACT
30 – 0.270” Long
31 – 0.300” Long
32 – 0.400” Long
33 – 0.500” Long
34 – 0.700” Long
35 – 0.800” Long
36 – 0.900” Long
37 – 0.600” Long
38 – 1.000” Long
HARDWARE
39 – 0.370” Long (use with #30 contact)
40 – 0.400” Long (use with #31 contact)
41 – 0.500” Long (use with #32 contact)
42 – 0.600” Long (use with #33 contact)
43 – 0.800” Long (use with #34 contact)
44 – 0.900” Long (use with #35 contact)
45 – 1.000” Long (use with #36 contact)
46 – 0.700” Long (use with #37 contact)
47 – 1.100” Long (use with #38 contact)
PLEASE CONSULT THE AIRBORN WEBSITE FOR THE LATEST REVISION OF THIS DOCUMENT PRIOR TO BEGINNING ANY DESIGN WORK.
MATED HEIGHT
The connector body height is 0.150” but the functional spacing (the bottom surface of the board,
on which the connector is mounted, to the top of the connector below it) can be modified based on
the contact/pin length selected (see Table 2 in top window).
MATERIALS and FINISHES
Contact: . . . . . . . . . . . . . . . . . . . . . . . . . . . . BeCu per ASTM B768 (BeCu C17410 brush alloy 174)
Contact Finish: . . . . . . . . . . . . . . . . . . . . . . Gold per MIL-G-45204 over nickel per IAW QQ-N-290
Molded Insulator: . . . . . . . . . . . . . . . . .
Glass-filled polyphenylene sulfide (PPS) per MIL-M-24519
Hardware: . . . . . . . . . . . . . . . . . . . . . . . Stainless steel per ASTM A582, passivated per ASTM 967
Guide Pin/Socket:
. . . . . . . . . . . . . . . . . . .
BeCu per ASTM B196/197, nickel-plated per QQ-N-290
NOTE: AirBorn can manufacture special configurations to your exact specifications.
PERFORMANCE
SI DATA – Differential 100 Ohm
1
2
3
4
Diff . Insertion Loss
Diff . Return Loss
NEXT
FEXT
REQUIREMENTS
ACTUAL
5 .0 GHz @ -3 dB
2 .0 GHz @ -8 dB
4 .0 GHz @ -25 dB
4 .0 GHz @ -35 dB
Contact Rating: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 amperes
Operating Temperature: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65° C to +125° C
Insulation Resistance: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5,000 megaohms minimum @ 500 VDC
Durability: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 connector mating cycles
Contact Resistance: . . . . . . . . . . . . . . . . . . . . . . . . . . 3 to 5 milliohms (contact length dependent)
Contact Engagement Force: . . . . . . . . . . . . . . . . . . . . .
4.0 oz (113 g) max. w/0.0246” dia. test pin
Contact Separation Force: . . . . . . . . . . . . . . . . . . . . . . . .
0.5 oz (14 g) min. w/0.0226” dia. test pin
Compliant Insertion Force: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 .5 lb (10 .21 Kg) max . per contact
Compliant Removal Force: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 .5 lb (2 .04 Kg) min . per contact
www.airborn.com
4
RC442-PNB-1E
(512 ) 863-5585
CALL 512-863-5585
x6400
DIMENSIONS
CONTACT CUSTOMER SERVICE
RC4B2 - Bottom-of-Stack Cable
Mating Connector (Female)
Contact spacing: 0.075” (1.91 mm)
A full profile bodied female cable connector
for use at the bottom of an RC board stack
application.
Sample Part Number Format: RC4B2-052-281-62ED
RC4B2
SERIES
Stackable
Compliant
Full-Profile
4 Rows
0.075” Spacing
Bottom-of-Stack
Cable Femate
CONFIGURATION
028 – 4 Rows/7 Columns
052 – 4 Rows/13 Columns
076 – 4 Rows/19 Columns
100 – 4 Rows/25 Columns
128 – 4 Rows/32 Columns
152 – 4 Rows/38 Columns
PLATING
1
–
50 µ” Au
3
–
30 µ” Au
CONTACT
28 – Socket, crimp, 26-24 AWG
29 – Socket, crimp, 30-28 AWG
TYPE
00 – None
XX – See Wire Codes
HARDWARE
00 – None
58 – Guide socket, non-polarized
62 – Jacksocket, hex, turning
VARIATION
Blank – None
XXX – Consult factory
TYPE and COLOR
Size
Mil-W-16878/4
C
24 awg
D
24 awg
E
26 awg
F
26 awg
G
28 awg
H
28 awg
J
30 awg
K
30 awg
Mil-W-22759/33
N
24 awg
P
24 awg
R
26 awg
S
26 awg
T
28 awg
U
28 awg
V
30 awg
W
30 awg
Code
Color
Ten repeating
White
Ten repeating
White
Ten repeating
White
Ten repeating
White
Ten repeating
White
Ten repeating
White
Ten repeating
White
Ten repeating
White
LENGTH
Code Length
(+1"/-0")
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
6"
12"
18"
24"
30"
36"
42"
48"
54"
60"
66"
72"
84"
96"
108"
120"
PLEASE CONSULT THE AIRBORN WEBSITE FOR THE LATEST REVISION OF THIS DOCUMENT PRIOR TO BEGINNING ANY DESIGN WORK.
MATED HEIGHT
Connector body height is 0.475” and is designed to mount flush to the board bottom of the mating
connector .
MATERIALS and FINISHES
Contact: . . . . . . . . . . . . . . . . . . . . . . . . . . . BeCu per ASTM B196 or B197 (BeCu alloy 172 or 173)
Contact Finish: . . . . . . . . . . . . . . . . . . . . . . . . . . Gold per MIL-G-45204 over nickel per QQ-N-290
Molded Insulator: . . . . . . . . . . . . . . . . .
Glass-filled polyphenylene sulfide (PPS) per MIL-M-24519
Hardware: . . . . . . . . . . . . . . . . . .
Stainless steel per ASTM A484/A484M and ASTM A582/A582M,
passivated per SAE AMS-2700
NOTE: AirBorn can manufacture special configurations to your exact specifications.
PERFORMANCE
NOTES
1 . The RC4B2 connector is designed to mate with an RC422 connector using contact option
-21 (0.270” long) and -39MT hardware. This contact length and hardware combination
assures proper connector mating when using boards having a thickness of 0.058”–0.125”.
2 . When guide hardware is required on the RC4B2 connector, use hardware option -3900 on
the mating connector .
3 . When jacksocket hardware is required on the RC4B2 connector, use hardware option
-39MT on the mating connector .
Contact Rating: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 amperes
Operating Temperature: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65° C to +125° C
Insulation Resistance: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5,000 megaohms minimum @ 500 VDC
Durability: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 connector mating cycles
Contact Resistance: . . . . . . . . . . . . . . . . . . . . . . . . . . 3 to 5 milliohms (contact length dependent)
Contact Engagement Force: . . . . . . . . . . . . . . . . . . . . .
4.0 oz (113 g) max. w/0.0246” dia. test pin
Contact Separation Force: . . . . . . . . . . . . . . . . . . . . . . . .
0.5 oz (14 g) min. w/0.0226” dia. test pin
www.airborn.com
(512 ) 863-5585
RC4B2C-PNB-1E
5
微控制器 MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
