AS85049/140
Straight Lipped Heat Shrink Boot
B
AS85049
Basic
Part Number
Dash
Number
Table I
Material
Table II
See Note 2
Drain Holes
Omit for None
M85049/140
-
05
H
Adhesive
C
D
P
C
= Adhesive Lined
U
= No Adhesive
Table III
Injection
Vent Ports
P
= Vent Ports
Omit for None
R
P
See
Note 2
H Dia
H
J Dia
T
HW
S
H Dia
J Dia
Optional Ø.12 (3.05) Drain Holes JW
.12 Ref (4 Places, 90° Apart)
(3.05)
As Recovered with Drain Holes
Additional Boot Lips
(Mfr Option)
See
Note 2
As Supplied
H
Optional
Ø.12 (3.05)
Vent Port
RR
Optional
Ø.18 (4.57)
Injection Port
PP
As Recovered with Injection-Vent Port
© 2013 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
Mil-Spec Backshells
U.S. CAGE Code 06324
Rev. 8.29.14
Printed in U.S.A.
GLENAIR, INC.
•
1211 AIR WAY
•
GLENDALE, CA 91201-2497
•
818-247-6000
•
FAX 818-500-9912
www.glenair.com
B-142
E-Mail: sales@glenair.com
AS85049/140
Straight Lipped Heat Shrink Boot
TABLE I: Dash Number and Dimensions (Continued Below)
J Dia Min
J Dia Min
P
R
H Dia Max
J Dia Max
(As Recovered) (As Recovered)
(As Supplied)
(As Supplied)
(As Recovered) Material A, B, H
(As Recovered)
Material G
±10%
Ref
0.41 (10.4)
0.56 (14.2)
0.70 (17.6)
0.88 (22.4)
1.11 (28.2)
1.38 (35.1)
1.75 (44.5)
2.27 (57.7)
0.92 (23.4)
1.12 (28.4)
1.22 (31.0)
1.42 (36.1)
1.68 (42.7)
2.04 (51.8)
2.60 (66.0)
3.22 (81.8)
0.47 (11.9)
0.58 (14.7)
0.63 (16.0)
0.73 (18.5)
0.87 (22.1)
1.39 (35.3)
1.80 (45.7)
2.25 (57.2)
0.24 (6.1)
0.26 (6.6)
0.28 (7.1)
0.38 (9.7)
0.39 (9.9)
0.63 (16.0)
0.80 (20.3)
1.00 (25.4)
1.50 (38.1)
2.16 (54.9)
2.63 (66.8)
3.15 (80.0)
4.08 (103.6)
5.13 (130.3)
6.50 (165.1)
7.00 (177.8)
0.83 (21.1)
1.09 (27.7)
1.39 (35.3)
1.63 (41.4)
2.22 (56.4)
2.54 (64.5)
3.31 (84.1)
3.75 (95.3)
Dash
No.
01
02
03
04
05
06
07
08
H Dia Min
(As Supplied)
0.92 (23.4)
1.12 (28.4)
1.22 (31.0)
1.42 (36.1)
1.68 (42.7)
2.04 (51.8)
2.60 (66.0)
3.22 (81.8)
B
TABLE I: Dash Number and Dimensions (Continued from Above)
T
HW
PP
S
RR
Dash
JW Max
(As Recovered) (As Recovered) (As Recovered) (As Recovered) (As Recovered) (As Recovered)
No.
Ref
±20%
±10%
±10%
±10%
01
02
03
04
05
06
07
08
0.04 (1.0)
0.04 (1.0)
0.04 (1.0)
0.04 (1.0)
0.07 (1.8)
0.07 (1.8)
0.08 (2.0)
0.08 (2.0)
0.07 (1.8)
0.07 (1.8)
0.08 (2.0)
0.08 (2.0)
0.09 (2.3)
0.13 (3.3)
0.16 (4.1)
0.16 (4.1)
0.09 (2.2)
0.09 (2.2)
0.10 (2.5)
0.10 (2.5)
0.11 (2.7)
0.16 (4.0)
0.19 (4.9)
0.19 (4.9)
0.60 (15.2)
0.60 (15.2)
0.60 (15.2)
0.60 (15.2)
0.60 (15.2)
0.60 (15.2)
0.60 (15.2)
0.60 (15.2)
0.48 (12.2)
0.49 (12.4)
0.75 (19.1)
0.75 (19.1)
0.75 (19.1)
0.57 (14.5)
0.68 (17.3)
0.68 (17.3)
N/A
.85 (21.6)
.96 (24.4)
1.17 (29.7)
1.44 (36.6)
2.12 (53.8)
2.59 (65.8)
2.64 (67.1)
TABLE II: Shrink Boot Materials
Material Compound
Code
A
B
G
H
2071
2040
2010
2025
Material Description
Flexible Polyolefin
General Purpose Polyolefin
Zero Halogen Polyolefin
High Performance Elastomer
Color
Code
WHITE
RED
GREEN
BLUE
TABLE III: Adhesive Description
Symbol
C
Adhesive Description
Zero Halogen / Hot Melt
APPLICATION NOTES
1.
See bag identification for matching boot
number, not number on boot. See part number
development for full description.
Encircled material letter designator located
on O.D. approximately mid length along the
“J” end. See part number development for full
description.
Metric dimensions (mm) are in parentheses.
2.
3.
© 2013 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
Mil-Spec Backshells
U.S. CAGE Code 06324
Rev. 8.29.14
Printed in U.S.A.
GLENAIR, INC.
•
1211 AIR WAY
•
GLENDALE, CA 91201-2497
•
818-247-6000
•
FAX 818-500-9912
www.glenair.com
B-143
E-Mail: sales@glenair.com
AS85049
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
