MMC Ready
™
Manual
Additional board
MikroElektronika
All Mikroelektronika’s development systems feature a large number of peripheral
modules expanding microcontroller’s range of application and making the
process of program testing easier. In addition to these modules, it is also
possible to use numerous additional modules linked to the development system
through the I/O port connectors. Some of these additional modules can operate
as stand-alone devices without being connected to the microcontroller.
MMC Ready
The MMC Ready additional board is used to read and write to SD memory cards. It can also serve as a small development
system as it features a 28-pin microcontroller PIC18F252.
Key features:
- On-board microcontroller PIC18F252;
- External programmer is used for programming;
- Low power consumption;
- 5V DC power supply voltage.
Figure 1:
MMC Ready additional board
How to connect the board?
The MMC Ready additional board can be easily connected to a device or a microcontroller via pads CN1 and CN5.
Next to each pad, there is a designation indicating the microcontroller pin that it is connected to. The PICFlash external
programmer is used to program the microcontroller on the addititonal board. It is connected to the board via a 2x5
connector CN2, Figure 2.
How to use the board?
The program used to read SD memory cards is loaded into the microcontroller supplied on the additional board. If
needed, it is also possible to load another program into the microcontroller by using the PICFlash external programmer.
When the microcontroller is programmed, it is necessary to place jumpers over RB6 and RB7 pins on the CN2 connector.
Otherwise, pins RB6 and RB7 will not be connected to pads.
More information on the MMC Ready additional board and examples for it may be found on our website at:
http://www.mikroe.com/eng/products/view/528/mmc-ready-board/#/
MikroElektronika
MikroElektronika
If you want to learn more about our products, please visit our website at www.mikroe.com
If you are experiencing some problems with any of our products or just need additional information, please place your ticket at
www.mikroe.com/en/support
If you have any questions, comments or business proposals, do not hesitate to contact us at office@mikroe.com