Leopard Imaging Inc.
1130 Cadillac Ct.
Milpitas, CA 95035
Phone: (408) 263-0988
Fax: (408) 217-1960
Web:
www.leopardimaging.com
Product Overview
LNC IP camera is the next-generation IP Camera. It outputs full HD Video in
H.264, MPEG-4, MJPEG and other video format at 30 frames per second through the
network. The Graphic Processing Unit supports noise suppression, wide dynamic
range, image enhancement and lens distortion correction, which makes clear images
achievable even under high-contrast, low-light environment. The LNC IP camera is
ONVIF compliant and can be easily integrated into security systems.
Package contents
1. LNC IP Camera
2. 12V DC Power Adapter
3.
User’s Guide
4. Mounting bracket
5. Certificate and Warranty Card
(1)
(1)
(1)
(1)
(1)
Optional Accessory
1. Tripod Mount
-2-
Leopard Imaging Inc.
1130 Cadillac Ct.
Milpitas, CA 95035
Phone: (408) 263-0988
Fax: (408) 217-1960
Web:
www.leopardimaging.com
LNC IP camera Interface Description
Interface
LAN
LED
DC 12V
A out
A in
SD Card
Mini USB
AUTO IRIS
ANT
ALM out
ALM in
GND
RS485
Description
RJ45 LAN Connector
Power Indicator
Power Input
DC 12V/1A
Audio output
Audio input
SD card slot
USB interface
Auto iris lens contact, (Support DC lens)
Wireless LAN interface
Alarm output
Alarm input (low level)
Ground
RS485 control, left RS485(-), right RS485(+) . PTZ decoder
can be connected to support multiple PTZ protocol.
-4-
Leopard Imaging Inc.
1130 Cadillac Ct.
Milpitas, CA 95035
Phone: (408) 263-0988
Fax: (408) 217-1960
Web:
www.leopardimaging.com
Installation
Notice
The LNC IP Camera and the Client PC needs to connected to the same routing
device (such as Router, switch etc) or to each other.
Please make sure the DC Adapter or POE is correct.
When connecting the alarm input, please make sure the input DC level is lower
than 5V.
Installation Procedure
1. Connect the Network cable to the network device or directly to the client PC.
2. Connect the 12V DC adapter.
3. After connecting the DC power, the LED indicator will be turned on. The
Network Connection indicator (Green LED) will turn on after five seconds.
The data indicator (Orange LED) will blink, which shows that the physical
network connection of the IP Camera is finished.
System Configuration
The LNC IP Camera can be managed and maintained via the Web Interface. Prior to
logging on to the Web interface, please make sure:
LNC IP Camera has a network connection and the power is on.
When configured for the first time, the Client PC and the IP Camera must be on
the same network.
It is recommended to use the Microsoft Internet Explorer 6.0 or higher version,
preferably IE 8.0.
If the client PC is running Windows XP, please make sure the UPnP is enabled.
-5-
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
