1300 Henley Court
Pullman, WA 99163
509.334.6306
www.digilentinc.com
PmodTPH2™ Reference Manual
Revised May 24, 2016
This manual applies to the PmodTPH2 rev. A
Overview
The PmodTPH2 is a 12 point test header, giving users easy access to any signals passing through the Pmod.
Features include:
12 external test point headers
Easily access and test signals passing
through
Small PCB size for flexible designs 1.3“ ×
0.8” (3.3 cm × 2.0 cm)
12-pin Pmod connector with GPIO interface
Follows
Digilent Pmod Interface
Specification
Type 1
The PmodTPH2.
1
Functional Description
Offering 12 isolated pass through connectors, this module is able to easily able to be placed between two pieces of
hardware allowing the user to observe and debug their circuit.
2
Interfacing with the Pmod
Attach your multimeter or oscilliscope (such as the Analog Discovery) to the vertical test point headers and
measure away!
DOC#: 502-081
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page
1
of
2
PmodTPH2™ Reference Manual
Header J1
Description
Pin
Pass through #1
7
Pass through #2
8
Pass through #3
9
Pass through #4
10
Pass through #5
11
Pass through #6
12
Pin
1
2
3
4
5
6
Signal
1
2
3
4
5
6
Signal
7
8
9
10
11
12
Description
Pass through #7
Pass through #8
Pass through #9
Pass through #10
Pass through #11
Pass through #12
Table 1. Pinout description table.
Any external power applied to the PmodTPH2 must be able to be handled by your two pieces of hardware on
either side of the Pmod.
3
Physical Dimenions
The pins on the pin header are spaced 100 mil apart. The PCB is 2 inches long on the sides parallel to the pins on
the pin header and 0.8 inches long on the sides perpendicular to the pin header.
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page
2
of
2
单片机
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
