LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Features
* Lead (Pb) free product – RoHS compliant.
* Low power consumption.
* High efficiency.
* Versatile mounting on P.C. board or panel.
* I.C. Compatible/low current requirements.
* Popular T-1 diameter.
Package Dimensions
Part No.
LTL17KEV3JS-032A
Lens
White Diffused
Source Color
AlInGaP Red
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25mm(.010") unless otherwise noted.
3. Protruded resin under flange is 1.0mm(.04") max.
4. Lead spacing is measured where the leads emerge from the package.
5. Specifications are subject to change without notice.
Part No. : LTL17KEV3JS-032A
BNS-OD-C131/A4
Page :
1
of
11
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Absolute Maximum Ratings at T
A
=25°C
Parameter
Power Dissipation
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
DC Forward Current
Derating Linear From 40°C
Operating Temperature Range
Storage Temperature Range
Lead Soldering Temperature
[2.0mm(.08") From Body]
Maximum Rating
120
120
50
0.67
-40°C to + 100°C
-40°C to + 100°C
260°C for 5 Seconds Max.
Unit
mW
mA
mA
mA/°C
Part No. : LTL17KEV3JS-032A
BNS-OD-C131/A4
Page :
2
of
11
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Electrical / Optical Characteristics at T
A
=25°C
Parameter
Symbol
Min.
Typ.
Max.
Unit
Test Condition
I
F
= 20mA
Note 1,5
Note 2 (Fig.6)
Measurement
@Peak (Fig.1)
I
F
= 20mA
Note 4
Luminous Intensity
I
V
5500
mcd
Viewing Angle
2θ
1/2
30
deg
Peak Emission Wavelength
λ
P
629
nm
Dominant Wavelength
λ
d
619
630
nm
Spectral Line Half-Width
∆λ
17
nm
Forward Voltage
V
F
1.8
2.4
V
I
F
= 20mA
Reverse Current
I
R
100
µA
V
R
= 5V, Note 6
NOTE: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE
eye-response curve.
2.
θ
1/2
is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. Iv classification code is marked on each packing bag.
4. The dominant wavelength,
λd
is derived from the CIE chromaticity diagram and represents the
single wavelength which defines the color of the device.
5. The Iv guarantee should be added
±
15% tolerance
6. Reverse voltage (V
R
) condition is applied for IR test only. The device is not designed reverse operation.
Part No. : LTL17KEV3JS-032A
BNS-OD-C131/A4
Page :
3
of
11
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Typical Electrical / Optical Characteristics Curves
(25°C Ambient Temperature Unless Otherwise Noted)
Part No. : LTL17KEV3JS-032A
BNS-OD-C131/A4
Page :
4
of
11
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Optical/Electrical Bin Table
Iv Spec. Table Specification.
Luminous Intensity Iv(mcd)
Bin Code
U
V
W
X
Min.
3200
4200
5500
7200
IF@20mA
Max.
4200
5500
7200
9300
Luminous Intensity Measurement allowance is ±15%
Vf Spec. Table Specification.
Forward Voltage Vf (Volts)
I
F
@20mA
Bin Code
1A
2A
3A
Min.
1.8
2.0
2.2
Max.
2.0
2.2
2.4
Note: Tolerance of each bin limit is ±0.10V
Part No. : LTL17KEV3JS-032A
NS-OD-C131/A4
Page :
5
of
11
详细参数
全文预览
微控制器 MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
