Through Hole Lamp
Product Data Sheet
LTL-1CHG
Spec No.: DS-20-96-0153
Effective Date: 03/25/2000
Revision: -
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
LITE-ON
ELECTRONICS, INC.
Property of Lite-On Only
Features
* Low power consumption.
* High efficiency.
* Versatile mounting on P.C. Board or panel.
* I.C. Compatible/low current requirement.
* 3.1 mm diameter package.
Package Dimensions
Part No.
LTL-1CHG
Lens
Green Diffused
Source Color
Green
NOTES:
1. All dimensions are in millimeters (inches).
2. Tolerance is
±0.25mm(.010")
unless otherwise noted.
3. Protruded resin under flange is 1.0mm(.04") max.
4. Lead spacing is measured where the leads emerge from the package.
5. Specifications are subject to change without notice.
Part No. : LTL-1CHG
BNS-OD-C131/A4
Page :
1
of
4
LITE-ON
ELECTRONICS, INC.
Property of Lite-On Only
Absolute Maximum Ratings at T
A
=25
℃
Parameter
Power Dissipation
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
Continuous Forward Current
Derating Linear From 50℃
Reverse Voltage
Operating Temperature Range
Storage Temperature Range
Lead Soldering Temperature
[1.6mm(.063") From Body]
120
30
0.4
5
-55
℃
to + 100
℃
-55
℃
to + 100
℃
mA
mA
mA/℃
V
Maximum Rating
100
Unit
mW
260℃ for 5 Seconds
Part No. : LTL-1CHG
BNS-OD-C131/A4
Page :
2
of
4
LITE-ON
ELECTRONICS, INC.
Property of Lite-On Only
Electrical Optical Characteristics at T
A
=25
℃
Parameter
Symbol
Min.
Typ.
Max.
Unit
Test Condition
I
F
= 10mA
Note 1,4
Note 2 (Fig.6)
Measurement
@Peak (Fig.1)
Note 3
Luminous Intensity
I
V
2θ
1/2
λ
P
λ
d
Δλ
3.7
12.6
mcd
Viewing Angle
60
deg
Peak Emission Wavelength
565
nm
Dominant Wavelength
569
nm
Spectral Line Half-Width
30
nm
Forward Voltage
V
F
2.1
2.6
V
μA
I
F
= 20mA
Reverse Current
I
R
100
V
R
= 5V
Capacitance
C
35
pF
V
F
= 0 , f = 1MHz
Note: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE
(Commission International De L'Eclairage) eye-response curve.
2.
θ
1/2
is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength,
λ
d
is derived from the CIE chromaticity diagram and represents the single
wavelength which defines the color of the device.
4. The Iv guarantee should be added
±15%.
Part No. : LTL-1CHG
BNS-OD-C131/A4
Page :
3
of
4
LITE-ON
ELECTRONICS, INC.
Property of Lite-On Only
Typical Electrical / Optical Characteristics Curves
(25
℃
Ambient Temperature Unless Otherwise Noted)
Part No. : LTL-1CHG
BNS-OD-C131/A4
Page :
4
of
4
详细参数
全文预览
单片机
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
