SMD LED
Product Data Sheet
LTST-C190TBKT-5A
Spec No.: DS22-2003-022
Effective Date: 08/24/2011
Revision: E
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Features
* Meet ROHS, Green Product.
* Extra Thin (0.80H mm) Chip LED
* Ultra Bright InGaN Chip LED
* Package In 8mm Tape On 7" Diameter Reels.
* EIA STD package.
* I.C. compatible.
* Compatible With Automatic Placement Equipment.
* Compatible With Infrared Reflow Solder Process.
Package Dimensions
Part no.
LTST-C190TBKT-5A
Lens
Water Clear
Source Color
InGaN Blue
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.10 mm (.004") unless otherwise noted.
Part
No. : LTST-C190TBKT-5A
Page :
1
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Absolute Maximum Ratings At Ta=25
℃
Parameter
Power Dissipation
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
DC Forward Current
Operating Temperature Range
Storage Temperature Range
Infrared Soldering Condition
LTST-C190TBKT-5A
76
Unit
mW
100
mA
20
-20°C to + 80°C
-30°C to + 100°C
260°C For 10 Seconds
mA
Part
No. : LTST-C190TBKT-5A
Page :
2
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Suggestion Profile:
Suggestion IR Reflow Profile For Pb Free Process
Part
No. : LTST-C190TBKT-5A
Page :
3
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Electrical Optical
Characteristics At Ta=25
℃
Part No.
LTST-
Parameter
Symbol
Min.
Typ.
Max.
Unit
Test Condition
IF = 5mA
Note 1
Luminous Intensity
IV
C190TBKT-5A
11.2
-
45.0
mcd
Viewing Angle
2θ1/2
C190TBKT-5A
130
deg
Note 2 (Fig.6)
Peak Emission Wavelength
λPeak
C190TBKT-5A
468
nm
Measurement
@Peak (Fig.1)
IF = 5mA
Note 3
Dominant Wavelength
λd
C190TBKT-5A
470.0
-
475.0
nm
Spectral Line Half-Width
Δλ
C190TBKT-5A
25
nm
Forward Voltage
VF
C190TBKT-5A
2.65
-
3.05
V
IF = 5mA
Reverse Current
IR
C190TBKT-5A
10
μA
VR = 5V
Note 5
Notes: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the
CIE eye-response curve.
2.
θ
1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength,
λ
d is derived from the CIE chromaticity diagram and represents the
single wavelength which defines the color of the device.
4. Caution in ESD:
Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti-electrostatic
glove when handling the LED. All devices, equipment and machinery must be properly grounded.
5. Reverse voltage (VR) condition is applied to IR test only. The device is not designed for reverse operation.
Part
No. : LTST-C190TBKT-5A
Page :
4
of
12
BNS-OD-C131/A4
测试/测量
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
