SMD LED
Product Data Sheet
LTST-C194KSKT
Spec No. :DS22-2006-114
Effective Date: 03/16/2017
Revision: A
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Features
* Meet ROHS, Green Product.
* Extra thin (0.30H mm) Chip LED.
* Extra bright AlInGaP Chip LED.
* Package in 8mm tape on 7" diameter reels.
* EIA STD package.
* I.C. compatible.
* Compatible with automatic placement equipment.
* Compatible with infrared and vapor phase reflow solder process.
Package
Dimensions
Part no.
LTST-C194KSKT
Notes:
1. All dimensions are in millimeters (inches).
Lens
Water Clear
Source Color
AlInGaP Yellow
2. Tolerance is ± 0.10 mm (.004") unless otherwise noted.
Part
No. : LTST-C194KSKT
Page :
1
of
11
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Absolute
Maximum
Ratings
At
Ta=25
℃
LTST-C194KSKT
75
Parameter
Power Dissipation
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
DC Forward Current
Derating Linear From 25°C
Reverse Voltage
Operating Temperature Range
Storage Temperature Range
Wave Soldering Condition
Infrared Soldering Condition
Vapor Phase Soldering Condition
Unit
mW
80
mA
30
0.4
5
-55°C to + 85°C
-55°C to + 85°C
260°C For 5 Seconds
260°C For 5 Seconds
215°C For 3 Minutes
mA
mA/°C
V
Part
No. : LTST-C194KSKT
Page :
2
of
11
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Suggestion Profile:
(1) Suggestion IR Reflow Profile For Normal Process
(2) Suggestion IR Reflow Profile For Pb Free Process
R e c o m m e n d e d P r o file B e t w e e n A s s e m b le A n d H e a t-R e s is t a n c e L in e
T h e P r o file is a v a ila b le th a t m u s t to u s e S n A g
Cu
s o ld e r p a s t e
Part
No. : LTST-C194KSKT
Page :
3
of
11
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Electrical
Optical
Characteristics
Symbol
At
Ta=25
℃
Min.
Typ.
Max.
Unit
Test Condition
IF = 20mA
Note 1
Parameter
Part No.
LTST-
Luminous Intensity
IV
C194KSKT
28.0
-
180.0
mcd
Viewing Angle
2θ1/2
C194KSKT
130
deg
Note 2 (Fig.6)
Peak Emission Wavelength
λP
C194KSKT
588
nm
Measurement
@Peak (Fig.1)
IF = 20mA
Note 3
Dominant Wavelength
λd
C194KSKT
587.0
-
597.0
nm
Spectral Line Half-Width
Δλ
C194KSKT
15
nm
Forward Voltage
VF
C194KSKT
-
2.00
2.40
V
IF = 20mA
Reverse Current
IR
C194KSKT
10
μA
VR = 5V
Notes: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the
CIE eye-response curve.
2.
θ1/2
is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength,
λd
is derived from the CIE chromaticity diagram and represents the
single wavelength which defines the color of the device.
Part
No. : LTST-C194KSKT
Page :
4
of
11
BNS-OD-C131/A4
无线连接
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
