LITE-ON
Features
TECHNOLOGY
CORPORATION
Property of Lite-On Only
* Side looking special for LCD backlight.
* Package in 8mm tape on 7" diameter reels.
* Compatible with automatic placement equipment.
* Compatible with infrared and vapor phase reflow solder process.
* EIA STD package.
* I.C. compatible.
Package
Dimensions
Part no.
LTST-S110TGKT
Lens
Water Clear
Source Color
InGaN Green
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.10 mm (.004") unless otherwise noted.
Part No. : LTST-S110TGKT
BNS-OD-C131/A4
Page :
1
of
10
LITE-ON
Absolute
Maximum
Ratings
At
TECHNOLOGY
Ta=25
℃
CORPORATION
Property of Lite-On Only
Parameter
Power Dissipation
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
Continuous Forward Current
Derating Linear From 25°C
Reverse Voltage
Electrostatic Discharge Threshold(HBM)
Note A
Operating Temperature Range
Storage Temperature Range
Wave Soldering Condition
Infrared Soldering Condition
Vapor Phase Soldering Condition
LTST-S110TGKT
120
100
20
0.25
5
300
-20°C
-30°C
to + 80°C
to + 100°C
Unit
mW
mA
mA
mA/°C
V
V
260°C For 5 Seconds
260°C For 5 Seconds
215°C For 3 Minutes
Note A :
HBM : Human Body Model.
Seller gives no other assurances regarding the ability of to withstand ESD.
Suggest IR Reflow Condition :
Part No. : LTST-S110TGKT
BNS-OD-C131/A4
Page :
2
of
10
LITE-ON
Electrical
Parameter
Optical
Characteristics
Symbol
TECHNOLOGY
At
Ta=25
℃
Min.
Typ.
CORPORATION
Property of Lite-On Only
Part No.
LTST-
S110TGKT
Max.
Unit
Test Condition
IF = 20mA
Note 1
Note 2 (Fig.6)
Measurement
@Peak (Fig.1)
Note 3
Luminous Intensity
IV
71.0
150.0
mcd
Viewing Angle
2
θ
1/2
S110TGKT
130
deg
Peak Emission Wavelength
λ
Peak
S110TGKT
520
nm
Dominant Wavelength
λ
d
S110TGKT
525
nm
Spectral Line Half-Width
Δλ
S110TGKT
35
nm
Forward Voltage
VF
S110TGKT
3.4
3.8
V
IF = 20mA
Reverse Current
IR
S110TGKT
100
μ
A
VR = 5V
Notes: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the
CIE eye-response curve.
2.
θ
1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength,
λ
d is derived from the CIE chromaticity diagram and represents the
single wavelength which defines the color of the device.
4. Caution in ESD:
Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti-electrostatic
glove when handling the LED. All devices, equipment and machinery must be properly grounded.
Part No. : LTST-S110TGKT
BNS-OD-C131/A4
Page :
3
of
10
LITE-ON
TECHNOLOGY
CORPORATION
Property of Lite-On Only
Bin Code List
Luminous Intensity
Bin Code
Q1
Q2
R1
R2
S1
S2
Min.
71.0
90.0
112.0
140.0
180.0
224.0
Unit : mcd @20mA
Max.
90.0
112.0
140.0
180.0
224.0
280.0
Tolerance on each Intensity bin is +/-15%
Part No. : LTST-S110TGKT
BNS-OD-C131/A4
Page :
4
of
10
LITE-ON
TECHNOLOGY
CORPORATION
Property of Lite-On Only
Typical
(25
℃
Electrical
Ambient
/
Optical
Characteristics
Unless
Otherwise
Curves
Noted)
Temperature
Part No. : LTST-S110TGKT
BNS-OD-C131/A4
Page :
5
of
10
机器人开发
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
