LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Features
* Meet ROHS, Green Product.
* Extra Thin (0.55mm) Dual Color Chip LED.
* Ultra bright InGaN / AlInGaP Chip LED.
* Package in 8mm tape on 7" diameter reels.
* EIA STD package.
* I.C. compatible.
* Compatible with automatic placement equipment.
* Compatible with infrared reflow solder process.
Package Dimensions
Devices
Part No.
LTST-C295TBKFKT
Lens
Water Clear
AllnGaP Orange
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.10 mm (.004") unless otherwise noted.
2,4
Source Color
InGaN Blue
Pin Assignment
1,3
Part
No. : LTST-C295TBKFKT
Page :
1
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Absolute Maximum Ratings At Ta=25°C
°
LTST-C295TBKFKT
Parameter
Blue
Power Dissipation
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
Unit
Orange
75
80
30
-20°C
-30°C
to + 80°C
to + 100°C
mW
mA
mA
76
100
20
DC Forward Current
Operating Temperature Range
Storage Temperature Range
Infrared Soldering Condition
260°C For 10 Seconds
Part
No. : LTST-C295TBKFKT
Page :
2
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Suggestion Profile:
Suggestion IR Reflow Profile For Pb Free Process
Part
No. : LTST-C295TBKFKT
Page :
3
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Electrical / Optical Characteristics At Ta=25°C
°
Parameter
Symbol
MIN.
Luminous Intensity
IV
TYP.
MAX.
Viewing Angle
2θ1/2
TYP.
LTST-C295TBKFKT
Blue
28.0
180
130
Orange
45.0
Unit
Test Condition
mcd
IF =20mA
Note 1
280
130
deg
Note 2 (Fig.5)
Measurement
@Peak (Fig.1)
IF =20mA
Note 3
Peak Emission Wavelength
λP
TYP.
468
611
nm
Dominant Wavelength
λd
TYP.
470
605
nm
Spectral Line Half-Width
∆λ
TYP.
25
17
nm
Forward Voltage
VF
MAX.
3.80
2.40
V
IF =20mA
Reverse Current
IR
MAX.
10
10
µA
VR = 5V
Note 5
Notes: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the
CIE eye-response curve.
2.
θ1/2
is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength,λd is derived from the CIE chromaticity diagram and represents the
single wavelength which defines the color of the device.
4. Caution in ESD:
Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti-electrostatic glove
when handling the LED. All devices, equipment and machinery must be properly grounded.
5. Reverse voltage (VR) condition is applied to IR test only. The device is not designed for reverse operation.
Part
No. : LTST-C295TBKFKT
Page :
4
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Bin Code List
Luminous Intensity
Bin Code
N
P
Q
R
Color : Blue , Unit : mcd @20mA
Min.
28.0
45.0
71.0
112.0
Tolerance on each Intensity bin is +/-15%
Luminous Intensity
Bin Code
P
Q
R
S
Color : Orange , Unit : mcd @20mA
Min.
45.0
71.0
112.0
180.0
Tolerance on each Intensity bin is +/-15%
Max.
71.0
112.0
180.0
280.0
Max.
45.0
71.0
112.0
180.0
Part
No. : LTST-C295TBKFKT
Page :
5
of
12
BNS-OD-C131/A4
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
