LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Features
* Meet ROHS, Green Product.
* Extra Thin(0.35H mm) Chip LED
* Ultra Bright InGaN Chip LED
* Package In 8mm Tape On 7" Diameter Reels.
* EIA STD package.
* I.C. compatible.
* Compatible With Automatic Placement Equipment.
* Compatible With Infrared Reflow Solder Process.
Package
Dimensions
Part No.
LTST-C281TGKT-5A
Notes:
1. All dimensions are in millimeters (inches).
Lens
Water Clear
Source Color
InGaN Green
2. Tolerance is ± 0.10 mm (.004") unless otherwise noted.
Part No. : LTST-C281TGKT-5A
BNS-OD-C131/A4
Page :
1
of
12
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Absolute
Maximum
Ratings
At
Ta=25
℃
LTST-C281TGKT-5A
76
Parameter
Power Dissipation
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
DC Forward Current
Operating Temperature Range
Storage Temperature Range
Infrared Soldering Condition
Unit
mW
100
mA
20
-20°C to + 80°C
-30°C to + 100°C
260°C For 10 Seconds
mA
Part
No. : LTST-C281TGKT-5A
Page :
2
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Suggestion Profile:
Suggestion IR Reflow Profile For Pb Free Process
Part
No. : LTST-C281TGKT-5A
Page :
3
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Electrical
Optical
Characteristics
Symbol
At
Ta=25
℃
Min.
Typ.
Max.
Unit
Test Condition
IF = 5mA
Note 1
Parameter
Part No.
LTST-
Luminous Intensity
IV
C281TGKT-5A
28.0
-
280.0
mcd
Viewing Angle
2θ1/2
C281TGKT-5A
130
deg
Note 2 (Fig.5)
Peak Emission Wavelength
λP
C281TGKT-5A
525
nm
Measurement
@Peak (Fig.1)
IF = 5mA
Note 3
Dominant Wavelength
λd
C281TGKT-5A
520.0
535.0
nm
Spectral Line Half-Width
Δλ
C281TGKT-5A
35
nm
Forward Voltage
VF
C281TGKT-5A
2.50
-
3.10
V
IF = 5mA
Reverse Current
IR
C281TGKT-5A
10
μA
VR = 5V
Note 5
Notes: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the
CIE eye-response curve.
2.
θ1/2
is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength,
λd
is derived from the CIE chromaticity diagram and represents the
single wavelength which defines the color of the device.
4. Caution in ESD:
Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti-electrostatic
glove when handling the LED. All devices, equipment and machinery must be properly grounded.
5. Reverse voltage (VR) condition is applied to IR test only. The device is not designed for reverse operation.
Part
No. : LTST-C281TGKT-5A
Page :
4
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Bin Code List
Forward Voltage
Bin Code
E6
E7
E8
Min.
2.50
2.70
2.90
Unit : V @5mA
Max.
2.70
2.90
3.10
Tolerance on each Forward Voltage bin is +/-0.1volt
Luminous Intensity
Bin Code
N
P
Q
R
S
Min.
28.0
45.0
71.0
112.0
180.0
Unit : mcd @5mA
Max.
45.0
71.0
112.0
180.0
280.0
Tolerance on each Intensity bin is +/-15%
Dominant Wavelength
Bin Code
AP
AQ
AR
Min.
520.0
525.0
530.0
Unit : nm @5mA
Max.
525.0
530.0
535.0
Tolerance for each Dominate Wavelength bin is +/- 1nm
Part
No. : LTST-C281TGKT-5A
Page :
5
of
12
BNS-OD-C131/A4
PCB设计
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
