SMD LED
Product Data Sheet
LTW-S222DS5
Spec No.: DS22-2011-0522
Effective Date: 12/10/2013
Revision: C
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Features
* Meet ROHS.
* Side Looking Chip LED with Tin Plating
* Ultra Bright InGaN Chip LED.
* Package in 8mm Tape on 7" Diameter Reels.
* EIA STD Package.
* I.C. Compatible.
* Compatible with Automatic Placement Equipment.
* Compatible with Infrared Reflow Solder Process.
Package Dimensions
Part No.
LTW-S222DS5
Lens
Yellow
Emitted Color
InGaN White
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.10 mm (.004") unless otherwise noted.
Part No. : LTW-S222DS5
BNS-OD-C131/A4
Page :
1
of
12
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Absolute
Maximum
Ratings
At
Ta=25℃
LTW-S222DS5
35
50
10
-20°C to + 80°C
-30°C to + 85°C
260°C For 10 Seconds
Parameter
Power Dissipation
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
DC Forward Current
Operating Temperature Range
Storage Temperature Range
Infrared Soldering Condition
:
Unit
mW
mA
mA
Part No. : LTW-S222DS5
BNS-OD-C131/A4
Page :
2
of
12
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Suggestion Profile:
Suggestion IR Reflow Profile For Pb Free Process
Part No. : LTW-S222DS5
BNS-OD-C131/A4
Page :
3
of
12
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Electrical
Optical
Characteristics
At
Ta=25℃
Parameter
Symbol
Part No.
LTW-
Min.
Typ.
Max.
Unit
Test Condition
Luminous Intensity
IV
S222DS5
45.0
112.0
mcd
IF = 5mA
Note 1, 2, 5
Viewing Angle
2θ1/2
S222DS5
130
deg
Fig.5
IF = 5mA
Note 3, 5
Fig.1
x
Chromaticity Coordinates
y
S222DS5
0.294
0.286
Forward Voltage
VF
S222DS5
2.7
3.15
V
IF = 5mA
Reverse Current
IR
S222DS5
10
μA
VR = 5V
Note 7
Note : 1. Luminous intensity is measured with a light sensor and filter combination that approximates the
CIE eye-response curve.
2. Iv classification code is marked on each packing bag.
3. The chromaticity coordinates (x, y) is derived from the 1931 CIE chromaticity diagram.
4. Caution in ESD:
Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti-electrostatic
glove when handling the LED. All devices, equipment and machinery must be properly grounded.
5. Tester
CAS140B is for the chromaticity coordinates (x, y) and Iv.
6. The chromaticity coordinates (x, y) guarantee should be added ± 0.01 tolerance.
7. Reverse voltage (VR) condition is applied to IR test only. The device is not designed for reverse operation.
Part No. : LTW-S222DS5
BNS-OD-C131/A4
Page :
4
of
12
微控制器 MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
