FM24C16A
2-Wire Serial EEPROM
Data Sheet
May. 2011
Data Sheet
FM24C16A 2-Wire Serial EEPROM
Ver 1.1
1
INFORMATION IN THIS DOCUMENT IS INTENDED AS A REFERENCE TO ASSIST OUR CUSTOMERS IN THE SELECTION OF
SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD PRODUCT BEST SUITED TO THE CUSTOMER'S APPLICATION;
THEY DO NOT CONVEY ANY LICENSE UNDER ANY INTELLECTUAL PROPERTY RIGHTS, OR ANY OTHER RIGHTS,
BELONGING TO SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD OR A THIRD PARTY. WHEN USING THE
INFORMATION CONTAINED IN THIS DOCUMENTS, PLEASE BE SURE TO EVALUATE ALL INFORMATION AS A TOTAL
SYSTEM BEFORE MAKING A FINAL DECISION ON THE APPLICABILITY OF THE INFORMATION AND PRODUCTS. SHANGHAI
FUDAN MICROELECTRONICS GROUP CO., LTD ASSUMES NO RESPONSIBILITY FOR ANY DAMAGE, LIABILITY OR OTHER
LOSS RESULTING FROM THE INFORMATION CONTAINED HEREIN. SHANGHAI FUDAN MICROELECTRONICS GROUP CO.,
LTD PRODUCTS ARE NOT INTENDED FOR USE IN MEDICAL, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS. THE
PRIOR WRITTEN APPROVAL OF SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD IS NECESSARY TO REPRINT
OR REPRODUCE IN WHOLE OR IN PART THESE DOCUMENTS.
Future routine revisions will occur when appropriate, without notice. Contact Shanghai Fudan Microelectronics Group Co., Ltd sales
office to obtain the latest specifications and before placing your product order. Please also pay attention to information published
by Shanghai Fudan Microelectronics Group Co., Ltd by various means, including Shanghai Fudan Microelectronics Group Co., Ltd
home page (http://www.fmsh.com/).
Please contact Shanghai Fudan Microelectronics Group Co., Ltd local sales office for the specification regarding the information in this
documents or Shanghai Fudan Microelectronics Group Co., Ltd products.
Trademarks
Shanghai Fudan Microelectronics Group Co., Ltd name and logo, the
“复旦”
logo are trademarks or registered trademarks of
Shanghai Fudan Microelectronics Group Co., Ltd or its subsidiaries in China.
Shanghai Fudan Microelectronics Group Co., Ltd, Printed in the China, All Rights Reserved.
Data Sheet
FM24C16A 2-Wire Serial EEPROM
Ver 1.1
2
Description
The FM24C16A provides wide operation voltage of 16384
bits of serial electrically erasable and programmable
read-only memory (EEPROM) organized as 2048 words of
8 bits each. The device is optimized for use in many
industrial and commercial applications where low-power
and low-voltage operations are essential.
Packaging Type
Features
Low-voltage and Standard-voltage:
V
CC
= 1.7V to 5.5V
Internally Organized: 2048 x 8
2-wire Serial Interface
Schmitt Trigger, Filtered Inputs for Noise
Suppression
Bi-directional Data Transfer Protocol
1MHz (2.5V~5.5V) and 400 kHz (1.7V) Compatibility
Write Protect Pin for Hardware Data Protection
16-byte Page Write Modes
Partial Page Writes are Allowed
Self-timed Write Cycle (5 ms max)
High-reliability
–
Endurance: 1,000,000 Write Cycles
–
Data Retention: 100 Years
PDIP8, SOP8, TSSOP8 and TDFN8 Packages (RoHS
Compliant and Halogen-free)
Absolute Maximum Ratings
Operating Temperature
(Plastic Package)
Operating Temperature
(Module Package)
Storage Temperature
(Plastic Package)
Storage Temperature
(Module Package)
Voltage on Any Pin with Respect to
Ground
Maximum Operating Voltage
DC Output Current
-55°C to +125°C
-20°C to +60°C
-65°C to +150°C
Pin Name
-25°C to +70°C
-1.0V to +7.0V
6.25V
5.0 mA
A0~A2
NC
SDA
SCL
WP
V
CC
GND
Function
Not Connect
Not Connect
Serial Data Input/Output
Serial Clock Input
Write Protect
Power Supply
Ground
Pin Configurations
*NOTICE: Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or any other
conditions beyond those indicated in the operational sections of this
specification are not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
Data Sheet
FM24C16A 2-Wire Serial EEPROM
Ver 1.1
3
Figure 1．Block Diagram
Data Sheet
FM24C16A 2-Wire Serial EEPROM
Ver 1.1
4
Pin Description
SERIAL CLOCK (SCL):
The SCL input is used to
positive edge clock data into each EEPROM device
and negative edge clock data out of each device.
SERIAL DATA (SDA):
The SDA pin is bi-directional
for serial data transfer. This pin is open-drain driven
and may be wire-ORed with any number of other
open-drain or open-collector devices.
DEVICE/PAGE ADDRESSES:
The FM24C16A does
not use the device address pins, which limits the
number of devices on a single bus to one.
WRITE PROTECT (WP):
The FM24C16 A has a Write
Protect pin that provides hardware data protection.
The Write Protect pin allows normal read/write
operations when connected to ground (GND).
When the Write Protect pin is connected to V
CC,
the
write protection feature is enabled.
Write Protect Description
WP Pin
Status
WP=V
CC
WP=GND
Part of the Array Protected
FM 24C16A
Full (16K) Array
Normal Read/Write Operations
Memory Organization
FM24C16A, 16K SERIAL EEPROM:
Internally organized with 128 pages of 16 bytes each, the 16K requires an
11-bit data word address for random word addressing.
Data Sheet
FM24C16A 2-Wire Serial EEPROM
Ver 1.1
5
模拟与混合信号
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
