SMD LED
Product Data Sheet
LTST-C190KSKT
Spec No.: DS-22-99-0189
Effective Date: 10/26/2012
Revision: I
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Features
* Meet ROHS
* Extra thin (0.80H mm) Chip LED
* Ultra bright AlInGaP Chip LED.
* Package In 8mm Tape On 7" Diameter Reels.
* EIA STD package.
* I.C. compatible.
* Compatible With Automatic Placement Equipment.
* Compatible With Infrared Reflow Solder Process.
Package
Dimensions
Part No.
LTST-C190KSKT
Notes:
1. All dimensions are in millimeters (inches).
Lens
Water Clear
Source Color
AllnGaP Yellow
2. Tolerance is ± 0.10 mm (.004") unless otherwise noted.
Part
No. : LTST-C190KSKT
Page :
1
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Absolute
Maximum
Ratings
At
Ta=25
℃
LTST-C190KSKT
Parameter
Unit
Power Dissipation
75
mW
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
80
mA
DC Forward Current
30
mA
Reverse Voltage
5
V
Operating Temperature Range
-30°C to + 85°C
Storage Temperature Range
-40°C to + 85°C
Infrared Soldering Condition
260°C For 10 Seconds
Part
No. : LTST-C190KSKT
Page :
2
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Suggestion Profile:
Suggestion IR Reflow Profile For Pb Free Process
Part
No. : LTST-C190KSKT
Page :
3
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Electrical
Optical
Characteristics
At
Ta=25
℃
Parameter
Symbol
Part No.
LTST-
Min.
Typ.
Max.
Unit
Test Condition
Luminous Intensity
IV
C190KSKT
28.0
-
180.0
mcd
IF = 20mA
Note 1
Viewing Angle
2θ1/2
C190KSKT
130
deg
Note 2 (Fig.5)
Peak Emission Wavelength
λP
C190KSKT
588
nm
Measurement
@Peak (Fig.1)
IF = 20mA
Note 3
Dominant Wavelength
λd
C190KSKT
584.5
-
597.0
nm
Spectral Line Half-Width
Δλ
C190KSKT
15
nm
Forward Voltage
VF
C190KSKT
1.80
-
2.40
V
IF = 20mA
Reverse Current
IR
C190KSKT
10
μA
VR = 5V
Notes: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the
CIE eye-response curve.
2.
θ1/2
is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength,
λd
is derived from the CIE chromaticity diagram and represents the
single wavelength which defines the color of the device.
4. Caution in ESD:
Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti-electrostatic
glove when handling the LED. All devices, equipment and machinery must be properly grounded.
Part
No. : LTST-C190KSKT
Page :
4
of
12
BNS-OD-C131/A4
FPGA/CPLD
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
