SC8207 Series
FAN REMOTE CONTROL DECODER USED TOGETHER WITH SC5104
DESCRIPTION
SC8207 is a high performance electronic fan controller LSI, Speed
control, off-timer, nature wind, sleep mode are all built into a single chip.
Light control, buzzer output, key control input, as well as remote control
decoding circuitry are all provided to build a full function electronic fan
with remote control capability having the highest performance with the
least external components. Pin assignment and application circuit are
optimized for easy PCB layout and cost saving for electronic fan
application.
SC8207 adopted SDIP-22 or DIP-20 package.
SDIP-22
DIP-20
FEATURES
* Two groups swing function: level swing , cold-wind switch
level swing , vertical swing
* Independent light controlling: extension “L”
* Three operation modes: ordinary, nature and rhythm sleep.
* Three speed modes: strong, middle and low
* Memory start-up mode
* Middle wind start-up
* Buzzer indicator function operation
* Two bits consumer code
* Built-in 455kHz oscillator circuit
* Continued press key for 6 sec, send out “
Bi-Bi”
* Cooperate with SC5104 coder can build a full function electronic
* "ON/OFF" key select: "ON/OFF" — — “ version
K”
"ON/SPEED"— — other version
* Timer mode: A4: 0.5, 1, 2, 4 hours accumulated timer
N3: 1, 2, 4 hours non-accumulated
* Fan remote controller
* Air cleaner
* Humidifier
* Heater
APPLICATIONS
ORDERING INFORMATION
Part
SC8207N3
SC8207N3L
SC8207A4K
SC8207A4KL
SC8207A4KS
SC8207A4KSL
Package
DIP-20
SDIP-22
DIP-20
SDIP-22
DIP-20
SDIP-22
Accum-
ulated
--
--
--
--
--
--
--
--
Non-
accumulated
Light
control
--
Cold-wind
switch
--
--
--
--
--
--
Vertical
swing
Note:
“ indicated have four time output (0.5, 1, 2, 4 hour) accumulated timer mode.
A4”
“ indicated have three time output (1, 2, 4 hour) non-accumulated timer mode.
N3”
“ indicated have light output mode.
L”
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2004.08.03
Page 1 of 9
SC8207 Series
BLOCK DIAGRAM
V
DD
OSCI
OSCO
DI
OFF
TIMER
SPEED
MODE
SW1
SW2
LIGHT
Key Sense
and
LED Scan
Output
Oscillator
Timing
V
SS
LOW
Speed
Control
MED
STR
COM 1
LED
Scan
COM 2
COM 3
BUZ
Buzzer,
Swing/Light
Output
SHO1
SHO2
LTO
Rectifier
Decode
Timer
Memory
ABSOLUTE MAXIMUM RATING
(T
amb
=25°C)
Characteristics
Supply Voltage
Input/Output Voltage
Power Consumption
Operating Temperature
Storage Temperature
Symbol
V
DD
V
IN
P
D
T
opr
T
stg
Ratings
-0.3~6
V
SS
-0.3V ~ V
DD
+0.3V
500
-10 ~ +70
-40~+125
Unit
V
V
mW
°C
°C
DC ELECTRICAL CHARACTERISTICS
(unless otherwise specified, T
amb
=25°C, V
DD
=5.0V)
Characteristics
Supply Voltage
Static Consumption Current
Input High Level Voltage
Input Low Level Voltage
OFF, MODE, SPEED, TIMER
Scan Output Current
COM1~COM3 Scan Output
Sink Current
Driver Output Current
Buzzer Output Current
Symbol
V
DD
I
SB
V
IH
V
IL
I
OH
I
OL
I
OL
I
OH
--
V
DD
-V
SS
=5V
OSC stop, no load
--
--
V
DD
=5.0V
V
DD
=5.0V, V
o
=0.7V
V
DD
=5.0V, V
o
=0.7V
V
DD
=5.0V, V
o
=4.3V
Test conditions
Min.
3.0
--
0.7V
DD
0
--
--
--
--
--
10
40
10
5
REV:1.0
Typ.
5.0
--
Max.
6.0
500
V
DD
0.3V
DD
--
--
--
--
Unit
V
µA
V
V
mA
mA
mA
mA
2004.08.03
Page 2 of 9
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
SC8207 Series
PIN CONFIGURATION
PIN DESCRIPTION
DIP-20
pin no.
--
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
--
SDIP-22
pin no.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Symbol
LIGHT
DI
OFF
TIMER
SPEED
MODE
COM1
COM2
COM3
SW1
SW2
SHO2
SHO1
STR
MED
LOW
V
DD
BUZ
OSCO
OSCI
V
SS
LTO
Light control key input.
Remote control sensor input.
OFF control key input, shared with LED scan output.
TIMER control key input and LED scan output.
SPEED key control input and LED scan output.
MODE key control input and LED scan output.
Consumer code C2 select and LED scan common port.
Consumer code C1 select and LED scan common port.
LED scan common port.
LEVEL SWING key control and consumer code select diode connect port.
COLD key control SC8207A4KS /VERTICAL SWING key control port(N3, A4K)
Cold wind motor /vertical swing drive port
Level swing output port
Strong wind drive output
Middle wind drive output
Low wind drive output
Positive power
Buzzer drive output
455kHz oscillator input/output port
Negative power
Light drive output
Description
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2004.08.03
Page 3 of 9
SC8207 Series
FUNCTION DESCRIPTIONS
SC8207 is an electronic fan control IC, it use electronic touch switch and timer replace the traditional switch
and timer. SC8207 improved nature wind and sleep wind mode except hold the traditional fan functions, and
improved two groups of swing control and light control function. SC8206 cooperate with SC5104 encode IC,
implement the remote control of the fan.
“OFF” key:
It used to shut down the power of motor, fan stop operating. And the control circuit resume static state, and
stored the operate mode of power on. When started next time, it is activated into the operation mode stored in
the operation memory (Timer and sleep wind mode will not be stored).
“ON/SPEED” key:
It start fan if pressed when fan is off. It turn on the fan with middle wind for increase start moment. After three
second, it resume low wind mode, or the operation mode stored in the operating memory.
This key set the operate mode when fan is on, if successive pressing of ON/SPEED key, it will operate as low
wind, middle wind, strong wind, low wind, middle wind … … .go along with cycle.
“ON/OFF” key (extension K)
It start fan if pressed when fan is off. It turn on the fan with middle wind for increase start moment. After three
second, it resume low wind mode, or the operation mode stored in the operating memory.
It turn off the power when fan is on, fan stopped, control circuit resume static state, and stored the operate
mode into memory. When the fan turn on next time, it start in the operate mode in the memory (timer and sleep
mode will not be stored).
“SPEED” key (extension K)
SPEED key is used to turn on the fan change speed of the fan. When successive pressing of SPEED key, fan
will operate as follows: low wind, middle wind, strong wind, low wind… … go along with cycle.
“MODE” key:
It used to select the operating mode. If pressed successively when fan is on, it will operate as follows: normally
wind, nature wind, sleep wind, normally, nature wind … … go along with cycle.
a) Ordinary wind: the he wind speed is set by SPEED key and does not change as time passes.
b)
c)
Nature wind: it is set in program, and operate with “
SPEED” key, can produce strong nature wind,
middle nature wind, low nature wind, simulate the really nature wind.
Sleep wind: In sleep wind mode, the wind speed steps down automatically one level every interval, until
it reaches low wind level.
Where is the rule of down:
1)
If fan set in strong wind mode at first, it operate in strong nature wind for half an hour, then switch
into middle nature wind, after half an hour switch into low nature wind, until the preset time end or
turn off fan.
If fan set in middle wind mode at first, it operates in middle nature wind for half an hour, then switch
into low nature wind, until the preset time end or turn off fan.
If fan set in low nature wind at first, it operates in low nature wind, until the preset time end or turn
off.
2)
3)
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2004.08.03
Page 4 of 9
SC8207 Series
“TIMER” key:
This key used to set the preset off time.
Type mark with “ mean have four section time output (0.5, 1, 2, 4hour) accumulated.
A4”
Type mark with “ means have three section time output (1, 2, 4 hour) non-accumulated.
N3”
When fan is in the time mode, LED will indicate the remain time, means the fan will stop after the display time.
“LEVEL SWING” key:
If pressed when fan is in the operate mode, it can control the fan swing, it is invalid when fan stopped.
“VERTICAL SWING” key:
N3: If pressed when fan is in the operate mode, it can control the fan vertical swing, it is invalid when fan
stopped.
A4: If pressed when fan is in the operate mode, it can control the fan vertical swing. If continue pressed, fan up
to down swing. When release the key, swing stopped.
“COLD WIND” key:
If pressed when fan is in the operate mode, it can control the fan cold-wind switch, it is invalid when fan
stopped.
“LIGHT” key:
It is used to control light, is independent of the operate mode.
Buzzer output:
a) Turn on send out “
Bi-Bi”
b) Turn off send out “
Bi-“
c) Other available operate (include key press and remote controller receive) send out “
Bi”
CONTROL PANEL
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2004.08.03
Page 5 of 9
聊聊、笑笑、闹闹
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
