SMD LED
Product Data Sheet
LTST-C230KRKT-5A
Spec No.: DS22-2009-0024
Effective Date: 02/27/2016
Revision: A
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Features
* Meet ROHS, Green Product.
* Reverse mount Chip LED.
* Ultra bright AlInGaP Chip LED.
* Package in 8mm tape on 7" diameter reels.
* Compatible with automatic placement equipment.
* Compatible with infrared reflow solder process.
* EIA STD package.
* I.C. compatible.
Package
Dimensions
Part No.
LTST-C230KRKT-5A
Notes:
1. All dimensions are in millimeters (inches).
Lens
Water Clear
Source Color
AllnGaP Red
2. Tolerance is ±0.10 mm (.004") unless otherwise noted.
Part
No. : LTST-C230KRKT-5A
Page :
1
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Absolute
Maximum
Ratings
At
Ta=25
℃
LTST-C230KRKT-5A
75
80
30
5
-55°C to + 85°C
-55°C to + 85°C
260°C For 10 Seconds
Parameter
Power Dissipation
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
DC Forward Current
Reverse Voltage
Operating Temperature Range
Storage Temperature Range
Infrared Soldering Condition
Unit
mW
mA
mA
V
Part
No. : LTST-C230KRKT-5A
Page :
2
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Suggestion Profile:
Suggestion IR Reflow Profile For Pb Free Process
Part
No. : LTST-C230KRKT-5A
Page :
3
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Electrical
Optical
Characteristics
Symbol
At
Ta=25
℃
Min.
Typ.
Max.
Unit
Test Condition
IF = 5mA
Note 1
Parameter
Part No.
LTST-
Luminous Intensity
IV
C230KRKT-5A
7.1
-
45.0
mcd
Viewing Angle
2θ1/2
C230KRKT-5A
130
deg
Note 2 (Fig.5)
Peak Emission Wavelength
λP
C230KRKT-5A
639
nm
Measurement
@Peak (Fig.1)
Note 3
IF = 5mA
Dominant Wavelength
λd
C230KRKT-5A
631
nm
Spectral Line Half-Width
Δλ
C230KRKT-5A
20
nm
Forward Voltage
VF
C230KRKT-5A
2.0
2.4
V
IF = 5mA
Reverse Current
IR
C230KRKT-5A
10
μA
VR = 5V
Notes: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the
CIE eye-response curve.
2.
θ1/2
is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength,
λd
is derived from the CIE chromaticity diagram and represents the
single wavelength which defines the color of the device.
4. Caution in ESD:
Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti-electrostatic
glove when handling the LED. All devices, equipment and machinery must be properly grounded.
Part
No. : LTST-C230KRKT-5A
Page :
4
of
12
BNS-OD-C131/A4
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
