LITE-ON
Features
TECHNOLOGY
CORPORATION
Property of Lite-On Only
* Side looking special for LCD backlight.
* Package in 8mm tape on 7" diameter reels.
* Compatible with automatic placement equipment.
* Compatible with infrared and vapor phase reflow solder process.
* EIA STD package.
* I.C. compatible.
Package
Dimensions
Part no.
LTST-S110TBKT-5A
Notes:
1. All dimensions are in millimeters (inches).
Lens
Water Clear
Source Color
InGaN Blue
2. Tolerance is ± 0.10 mm (.004") unless otherwise noted.
Part
No. : LTST-S110TBKT-5A
Page :
1
of
10
BNS- D-C131/A4
LITE-ON
Absolute
Maximum
Ratings
At
TECHNOLOGY
Ta=25
℃
CORPORATION
Property of Lite-On Only
Parameter
Power Dissipation
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
DC Forward Current
Derating Linear From 25°C
Reverse Voltage
Electrostatic Discharge Threshold(HBM)
Note A
Operating Temperature Range
Storage Temperature Range
Wave Soldering Condition
Infrared Soldering Condition
Vapor Phase Soldering Condition
Note A :
LTST-S110TBKT-5A
120
100
20
0.25
5
300
-20°C
-30°C
to + 80°C
to + 100°C
Unit
mW
mA
mA
mA/°C
V
V
260°C For 5 Seconds
260°C For 5 Seconds
215°C For 3 Minutes
HBM : Human Body Model.
Seller gives no other assurances regarding the ability of to withstand ESD.
Suggest IR Reflow Condition :
Part No. : LTST-S110TBKT-5A
BNS-OD-C131/A4
Page :
2
of
10
LITE-ON
TECHNOLOGY
CORPORATION
Property of Lite-On Only
Electrical
Parameter
Optical
Characteristics
Symbol
At
Ta=25
℃
Min.
Typ.
Max.
Unit
Test Condition
IF = 5mA
Note 1
Note 2 (Fig.6)
Measurement
@Peak (Fig.1)
IF = 5mA
Note 3
Part No.
LTST-
S110TBKT-5A
Luminous Intensity
IV
11.2
-
28.0
mcd
Viewing Angle
2
θ
1/2
S110TBKT-5A
130
deg
Peak Emission Wavelength
λ
Peak
S110TBKT-5A
468
nm
Dominant Wavelength
λ
d
S110TBKT-5A
470
-
475
nm
Spectral Line Half-Width
Δλ
S110TBKT-5A
25
nm
Forward Voltage
VF
S110TBKT-5A
2.65
-
3.15
V
IF = 5mA
Reverse Current
IR
S110TBKT-5A
100
μ
A
VR = 5V
Notes: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the
CIE eye-response curve.
2.
θ
1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength,
λ
d is derived from the CIE chromaticity diagram and represents the
single wavelength which defines the color of the device.
4. Caution in ESD:
Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti-electrostatic
glove when handling the LED. All devices, equipment and machinery must be properly grounded.
Part No. : LTST-S110TBKT-5A
BNS-OD-C131/A4
Page :
3
of
10
LITE-ON
TECHNOLOGY
CORPORATION
Property of Lite-On Only
Bin Code List
Forward Voltage
Bin Code
1
2
3
4
5
Min.
2.65
2.75
2.85
2.95
3.05
Unit: V @5mA
Max.
2.75
2.85
2.95
3.05
3.15
Tolerance on each Forward Voltage bin is +/-0.1 volt
Luminous Intensity
Bin Code
L1
L2
M1
M2
Min.
11.2
14.0
18.0
22.4
Unit : mcd @5mA
Max.
14.0
18.0
22.4
28.0
Tolerance on each Intensity bin is +/-15%
Dominant Wavelength
Bin Code
1AD
2AD
Min.
470.0
472.5
Unit : nm @5mA
Max.
472.5
475.0
Tolerance for each Dominate Wavelength bin is +/- 1nm
Part No. : LTST-S110TBKT-5A
BNS-OD-C131/A4
Page :
4
of
10
LITE-ON
TECHNOLOGY
CORPORATION
Property of Lite-On Only
Typical
Electrical
/
Optical
Characteristics
Unless
Otherwise
Curves
Noted)
(25
℃
Ambient
Temperature
Part
No. : LTST-S110TBKT-5A
Page :
5
of
10
BNS-OD-C131/A4
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
