Form No:
S00003-1-0000-TBM01-151200553
Specification for Approval
Date:
2015/12/15
Customer :
友仁達
Halogen
Halogen-free
Pb
Pb-free
TAI-TECH P/N:
CUSTOMER P/N:
DESCRIPTION:
QUANTITY:
FCM2012-Series
Ferrite Chip Bead
pcs
REMARK:
Customer Approval Feedback
西 北 臺 慶 科 技 股 ½ 有 限 公 司
TAI-TECH Advanced Electronics Co., Ltd
■ 西北臺慶科技股½有限公司
TAI-TECH Advanced Electronics Co., Ltd
Headquarter:
NO.1 YOU 4TH ROAD, YOUTH INDUSTRIAL DISTRICT, YANG-MEI,
TAO-YUAN HSIEN, TAIWAN, R.O.C.
TEL: +886-3-4641148 FAX: +886-3-4643565
http://www.tai-tech.com.tw
E-mail: sales@tai-tech.com.tw
Sales Dep.
APPROVED
CHECKED
□ 東莞臺慶精密電子有限公司
DONGGUAN TAI-TECH ADVANCED ELECTRONICS CO., LTD
JITIGANG MANAGEMENT DISTRICT, HUANGJIANG, DONGGUAN,
GUANGDONG, CHINA
TEL: +86-769-3365488 FAX: +86-769-3366896
E-mail: twnwe@pub.dgnet.gd.cn
½芊鈺
Ivy Peng
徐½玲
Apple Hsu
Office:
金亨國際有限公司
KAMHENG INTERNATIONAL LIMITED
TEL: +86-852-25772033
FAX: +86-852-28817778
R&D Center
APPROVED
CHECKED
DRAWN
□ 臺慶精密電子(昆山)有限公司
TAI-TECH ADVANCED ELECTRONICS(KUNSHAN) CO., LTD
SHINWHA ROAD, KUNJIA HI-TECH INDUSTRIAL PARK, KUN-SHAN,
JIANG-SU, CHINA
TEL: +86-512-57619396 FAX: +86-512-57619688
E-mail: hui@tai-tech.com.tw
楊祥忠
Mike Yang
詹偉特
Jack Chan
張嘉玲
Alin Chang
Office:
北欣國際有限公司
NORTH STAR INTERNATIONAL LIMITED
TEL: +86-512-57619396
FAX: +86-512-57619688
TA734003
TAI-TECH
TBM01-151200553
Performance
FCB
FCM
HCB
GHB
FCA
FCI
FHI
FCH
HCI
--
--
P4.
5. Reliability and Test Condition
Item
Series No.
Operating Temperature
Test Condition
-40~+125℃
(Including self-temperature rise)
-40~+125℃
(on board)
-40~+105℃
(Including self-temperature rise)
-40~+105℃
(on board)
Transportation
Storage Temperature
Impedance (Z)
Inductance (Ls)
Q Factor
DC Resistance
Rated Current
For long storage conditions, please see the
Application Notice
Agilent4291
Agilent E4991
Agilent4287
Refer to standard electrical characteristics list
Agilent16192
Agilent 4338
DC Power Supply
Over Rated Current requirements, there will be
some risk
Rated Current < 1A
∆T
20
℃
Max
Temperature Rise Test
Rated Current
≧
1A
∆T
40
℃
Max
1. Applied the allowed DC current.
2. Temperature measured by digital surface
thermometer.
Number of heat cycles: 1
Resistance to Soldering
Heat
Appearance：No damage.
Impedance：within±15% of initial value
Inductance：within±10% of initial value
Q：Shall not exceed the specification value.
RDC：within ±15% of initial value and shall not exceed the specification value
Temperature
(°C)
260 ±5
(solder temp)
Time
(s)
10 ±1
Temperature
ramp/immersion
and emersion rate
25mm/s ±6 mm/s
Depth: completely cover the termination
Preheat: 150
℃
,60sec.
Solder: Sn96.5%-Ag3%-Cu0.5%
Solder temperature: 245±5℃
Flux for lead free: Rosin. 9.5%
Depth: completely cover the termination.
Dip time: 4±1sec.
Preheating Dipping Natural cooling
More than 95% of the terminal
Solderability
245° C
electrode should be covered
with solder.
150° C
60
second
4±1
second
Terminal strength
Appearance：No damage.
Impedance：within±15% of initial value
Inductance：within±10% of initial value
Q：Shall not exceed the specification value.
RDC：within ±15% of initial value and shall not
exceed the specification value
Preconditioning: Run through IR reflow for 2
times.( IPC/JEDEC J-STD-020D Classification
Reflow Profiles)
Component mounted on a PCB apply a force
(>0805:1kg <=0805:0.5kg)to the side of a
device being tested. This force shall be applied
for 60 +1 seconds. Also the force shall be
applied gradually as not to shock the
component being tested.
Bending
Appearance：No damage.
Impedance：within±10% of initial value
Inductance：within±10% of initial value
Q：Shall not exceed the specification value.
RDC：within ±15% of initial value and shall not exceed the specification value
Shall be mounted on a FR4 substrate of the
following dimensions:>=0805:40x100x1.2mm
<0805:40x100x0.8mm
Bending depth:>=0805:1.2mm
<0805:0.8mm
Duration of 10 sec for a min.
Vibration Test
Appearance：No damage.
Impedance：within±15% of initial value
Inductance：within±10% of initial value
Q：Shall not exceed the specification value.
RDC：within ±15% of initial value and shall not exceed the specification value
Preconditioning: Run through IR reflow for 2
times.( IPC/JEDEC J-STD-020D Classification
Reflow Profiles)
Oscillation Frequency: 10½2K½10Hz for 20
minutes
Equipment： Vibration checker
Total Amplitude:1.52mm±10%
Testing Time : 12 hours(20 minutes, 12 cycles
each of 3 orientations)。
Test condition:
Appearance：No damage.
Impedance：within±15% of initial value
Inductance：within±10% of initial value
Q：Shall not exceed the specification value.
RDC：within ±15% of initial value and shall not exceed the specification value
Peak
Type
Value
(g’s)
SMD
Lead
1,500
100
Normal
duration
(D) (ms)
0.5
6
Half-sine
Half-sine
Wave form
Velocity
change
(Vi)ft/sec
15.4
12.3
Shock
www.tai-tech.com.tw
stm32/stm8
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
