Form No:
T0000X-2-0000-KBM01-171100469
Specification for Approval
Date:
2017/11/21
Customer :
友仁達
Halogen
Halogen-free
Pb
Pb-free
TAI-TECH P/N:
CUSTOMER P/N:
DESCRIPTION:
QUANTITY:
FCI1608F-SERIES
pcs
REMARK:
Customer Approval Feedback
西 北 臺 慶 科 技 股 ½ 有 限 公 司
TAI-TECH Advanced Electronics Co., Ltd
□西北臺慶科技股½有限公司
TAI-TECH Advanced Electronics Co., Ltd
Headquarter:
NO.1 YOU 4TH ROAD, YOUTH INDUSTRIAL DISTRICT, YANG-MEI,
TAO-YUAN HSIEN, TAIWAN, R.O.C.
TEL: +886-3-4641148 FAX: +886-3-4643565
http://www.tai-tech.com.tw
E-mail: sales@tai-tech.com.tw
Sales Dep.
APPROVED
CHECKED
□Office:
深圳辦公室
11BC,Building B Fortune Plaza,NO.7002, Shennan Avenue, Futian
District Shenzhen
TEL: +86- 755-23972371 FAX: +86-755-23972340
詹字鈞
Elven Chan
鍾明君
Mandy Chung
■臺慶精密電子(昆山)有限公司
TAI-TECHADVANCED ELECTRONICS(KUNSHAN) CO., LTD
SHINWHA ROAD, KUNJIA HI-TECH INDUSTRIAL PARK, KUN-SHAN,
JIANG-SU, CHINA
TEL: +86-512-57619396 FAX: +86-512-57619688
E-mail: sales@tai-tech.cn
R&D Center
APPROVED
CHECKED
DRAWN
□慶邦電子元器件(泗洪)有限公司
TAIPAQ ELECTRONICS (SIHONG) CO., LTD
JIN SHA JIANG ROAD , CONOMIC DEVELOPMENT ZONE SIHONG ,
JIANGSU , CHINA.
TEL: +86-527-88601191 FAX: +86-527-88601190
E-mail: sales@taipaq.cn
鄧福興
浦冬生
王俞琴
TAKQ-E4-001
TAI-TECH
KBM01-171100469
P3.
Performance
FCI
FHI
FCH
HCI
--
--
5. Reliability and Test Condition
Item
Series No.
Operating Temperature
Test Condition
-40~+105℃
(Including self-temperature rise)
-40~+105℃
(on board)
Transportation
Storage Temperature
For long storage conditions, please see the
Application Notice
Agilent4291
Agilent E4991
Agilent4287
Inductance (Ls)
Q Factor
Refer to standard electrical characteristics list
DC Resistance
Rated Current
Agilent16192
Agilent 4338
DC Power Supply
Over Rated Current requirements, there will be
some risk
Temperature Rise Test
Rated Current < 1A ΔT 20℃Max
Rated Current
≧
1A ΔT 40℃Max
1. Applied the allowed DC current.
2. Temperature measured by digital surface
thermometer.
Preconditioning: Run through IR reflow for 2
times.( IPC/JEDEC J-STD-020D Classification
Reflow Profiles)
Temperature: 105±2℃
Applied current: rated current.
Duration: 1000±12hrs.
Measured at room temperature after placing
for 24±2 hrs.
Preconditioning: Run through IR reflow for 2
times.( IPC/JEDEC J-STD-020D Classification
Reflow Profiles)
Humidity: 85±2%R.H.
Temperature: 85±2℃.
Duration: 1000hrs Min. with 100% rated
current.
Measured at room temperature after placing
for 24±2 hrs.
Preconditioning: Run through IR reflow for 2
times.( IPC/JEDEC J-STD-020D Classification
Reflow Profiles)
Condition for 1 cycle
Step1: -40±2℃
30±5 min.
≦0.5min
Step2: 25±2℃
Step3: +105±2℃
30±5min.
Number of cycles: 500
Measured at room temperature after placing
for 24±2 hrs.
Preconditioning: Run through IR reflow for 2
times.( IPC/JEDEC J-STD-020D Classification
Reflow Profiles)
Oscillation Frequency: 10
½
2K
½
10Hz for 20
minutes
Equipment： Vibration checker
Total Amplitude:1.52mm±10%
Testing Time : 12 hours(20 minutes, 12 cycles
each of 3 orientations)。
Shall be mounted on a FR4 substrate of the
following dimensions:
>=0805inch(2012mm):40x100x1.2mm
<0805inch(2012mm):40x100x0.8mm
Bending depth:
>=0805inch(2012mm):1.2mm
<0805inch(2012mm):0.8mm
Duration of 10 sec for a min.
Life test
Appearance: no damage.
Impedance: within±15%of initial value.
Inductance: within±10%of initial value.
Q：Shall not exceed the specification value.
RDC：within ±15% of initial value and shall not exceed the specification value
Load Humidity
Appearance: no damage.
Thermal shock
Impedance: within±15%of initial value.
Inductance: within±10%of initial value.
Q：Shall not exceed the specification value.
RDC：within ±15% of initial value and shall not exceed the specification value
Vibration
Appearance：No damage.
Impedance：within±15% of initial value
Inductance：within±10% of initial value
Q：Shall not exceed the specification value.
RDC：within ±15% of initial value and shall not exceed the specification value
Bending
Appearance：No damage.
Impedance：within±10% of initial value
Inductance：within±10% of initial value
Q：Shall not exceed the specification value.
RDC：within ±15% of initial value and shall not exceed the specification value
Test condition:
Appearance：No damage.
Impedance：within±10% of initial value
Inductance：within±10% of initial value
Q：Shall not exceed the specification value.
RDC：within ±15% of initial value and shall not exceed the specification value
Peak
Type
Value
(g’s)
SMD
Lead
50
50
Normal
duration
(D) (ms)
11
11
Half-sine
Half-sine
Wave form
Velocity
change
(Vi)ft/sec
11.3
11.3
Shock
Insulation Resistance
IR>1GΩ
Chip Inductor Only
Test Voltage:100±10%V for 30Sec.
Preheat: 150℃,60sec.
Solder: Sn96.5%-Ag3%-Cu0.5%
Solder temperature: 245±5℃
Flux for lead free: Rosin. 9.5%
Depth: completely cover the termination.
Dip time: 4±1sec.
Solderability
More than 95% of the terminal electrode should be covered with solder.
www.tai-tech.com.tw
国产芯片交流
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
