SMD LED
Product Data Sheet
LTST-S220TGKT
Spec No.: DS22-2000-298
Effective Date: 12/10/2013
Revision: F
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Features
* Meet ROHS.
* Side Looking Chip LED with Tin Plating
* Ultra Bright InGaN Chip LED.
* Package in 8mm Tape on 7" Diameter Reels.
* EIA STD Package.
* I.C. Compatible.
* Compatible with Automatic Placement Equipment.
* Compatible with Infrared Reflow Solder Process.
Package
Dimensions
Part No.
LTST-S220TGKT
Notes:
1. All dimensions are in millimeters (inches).
Lens
Water Clear
Source Color
InGaN Green
2. Tolerance is ± 0.10 mm (.004") unless otherwise noted.
Part
No. : LTST-S220TGKT
Page :
1
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Absolute
Maximum
Ratings
At
Ta=25
℃
LTST-S220TGKT
Unit
Parameter
Power Dissipation
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
DC Forward Current
76
mW
100
mA
20
mA
Operating Temperature Range
-20°C
to + 80°C
Storage Temperature Range
-30°C to + 100°C
Infrared Soldering Condition
260°C For 10 Seconds
Part
No. : LTST-S220TGKT
Page :
2
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Suggestion Profile:
Suggestion IR Reflow Profile For Pb Free Process
Part
No. : LTST-S220TGKT
Page :
3
of
12
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Electrical
Optical
Characteristics
At
Ta=25
℃
Parameter
Symbol
Part No.
LTST-
S220TGKT
Min.
Typ.
Max.
Unit
Test Condition
IF = 20mA
Note 1
Note 2 (Fig.5)
Measurement
@Peak (Fig.1)
Note 3
IF = 20mA
Luminous Intensity
IV
71.0
450.0
mcd
Viewing Angle
Peak Emission
Wavelength
Dominant Wavelength
2θ1/2
S220TGKT
130
deg
λP
S220TGKT
530
nm
λd
S220TGKT
525
nm
Spectral Line Half-Width
Δλ
S220TGKT
35
nm
Forward Voltage
VF
S220TGKT
2.8
3.2
3.6
V
IF = 20mA
VR = 5V
Note 5
Reverse Current
IR
S220TGKT
10
μA
Notes: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the
CIE eye-response curve.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the
single wavelength which defines the color of the device.
4. Caution in ESD:
Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti-electrostatic
glove when handling the LED. All devices, equipment and machinery must be properly grounded.
5. Reverse voltage (VR) condition is applied to IR test only. The device is not designed for reverse operation.
Part
No. : LTST-S220TGKT
Page :
4
of
12
BNS-OD-C131/A4
详细参数
全文预览
淘e淘
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
