EXCEL CELL ELECTRONIC CO., LTD.
S PE CI F I CAT I O N
NO.
Edition
2
A31227
Page
1
ECS - INDUSTRIAL CONTROL SWITCH
PUSHBUTTON
1. FEATURES
Detachable contact block for easy installation and removal. It can meet variety of
needs and improve work efficiency.
IP65 waterproof type. It is designed for liquid and oil prevention and enables to be
used in different environment.
In accordance with the standards of UL, cUL, CE, CCC, and TUV.
2. SPECIFICATIONS
2.1 . ELECTRICAL
2-1-1. Rated thermal current
2-1-2. Rated insulation voltage
2-1-3. Utilization category
2-1-4. Minimum switching capacity [ref.]
2-1-5. Dielectric strength
2-1-6. Insulation resistance
2-1-7. Contact resistance
2-2. MECHANICAL AND ENVIRONMENTAL
2-2-1. Operating temperature
10A
650V
AC-15(A600) or Ue 240V / Ie 3A
Ue 380V / Ie 1.9A
DC-13(P600) or Ue 250V / Ie 0.55A
3V DC/AC, 5mA
2500V AC, 1 min.
100M min. at 500V DC
50m max. (initial)
-25℃ ~ +70℃
-25℃
-40℃ ~ +85℃
45% ~ 85% RH
IP65 (from the front of the panel)
3 (IEC 60947-5-1)
10-55Hz amplitude 0.5mm
2
100 m/s (10G)(malfunction)
2
1000 m/s (100G)(destruction)
5,000,000 operations
(for momentary type)
frequency 3600 operations/hr
500,000 operations
(for maintained type)
frequency 1800 operations/hr
500,000 operations
frequency 1800 operations/hr
35N (for momentary type)
25N (for maintained type)
over 4 mm
M3.5 screw connection
Direct opening mechanism of NC
→
contact to open the circuit○
(without icing or condensation)
~ +55℃
(for illuminated type)
2-2-2. Storage temperature
2-2-3. Humidity
2-2-4. Degree of protection
2-2-5. Degree of contamination
2-2-6. Vibration resistance
2-2-7. Shock resistance
2-2-8. Mechanical Life
2-2-9. Electrical Life
2-2-10. Operation Force(from 1a1b)[ref.]
2-2-11. Operation travel
2-2-12. Connection type
2-2-13. Direct opening action
(60431)2016.06.08
EXCEL CELL ELECTRONIC CO., LTD.
S PE CI F I CAT I O N
3. CONSTRUCTION
NO.
Edition
2
A31227
Page
2
Contact Unit
LED Unit
Operation Unit
Operation unit, LED unit, and contact unit (contact blocks) can be sold separately.
Please see [4.Part numbering system] for operation unit part number. For other
accessories (LED lamp, contact block, etc.), please refer to accessory part in
catalog.
(60431)2016.06.08
EXCEL CELL ELECTRONIC CO., LTD.
S PE CI F I CAT I O N
4.
PART NUMBERING SYSTEM
ECS – XX X P 1 R X – X X X 0 – L XX R
NO.
Edition
2
A31227
Page
3
Lamp color: R(Red) / Y(Yellow) / B(Blue)
G(Green) / W(White)
Applied voltage: 06: 6V AC/DC
12: 12V AC/DC
24: 24V AC/DC
A1: 110V AC
A2: 220V AC
Lamp type: L: LED
Contact block special number:
Function:
0: n/a
1: latch-type modular without socket
2: lamp modular
3: latch-type modular with socket
Contact configuration: 10:1a
01:1b
(see 9-2)
Operator special number:
Blank: n/a
N: key recess type
Cover color: R(Red) / Y(Yellow) / B(Blue) / G(Green)
W(White) / K(Black) / O(Orange)
Type:
1: Flat, momentary type
2: Flat, maintained type
3: Extended, momentary type
4: Extended, maintained type
Operator:
P: Pushbutton
Appearance:
R: Round
Q: Square
(only for 22 & 25 mm)
Mounting hole dia. :
22: Ø 22 mm
25: Ø 25 mm
30: Ø 30 mm
Series: ECS: Industrial Control Switch
(60431)2016.06.08
EXCEL CELL ELECTRONIC CO., LTD.
S PE CI F I CAT I O N
NO.
Edition
2
A31227
Page
4
5. INSTALLATION
5-1. Panel thickness
The panel thickness must be 1 to 7 mm.
Take into consideration about the thickness of accessories
(such as name plate, switch guard, etc.) while using.
5-2. Panel cutout
Cutout diameter and distance
Unit: mm
22R / 25R
A
22.3/25.3
- 0
22R / 25R
X
Y
30
50
+0.4
22Q / 25Q
22.3/25.3
- 0
22Q / 25Q
32
50
+0.4
30R
30.5
- 0
30R
50
65
+0.5
Unit: mm
Long Lever Selector Switch
Emergency Stop Switch
50
50
Key recess cutout (22mm only)
Unit: mm
Mounting Hole(Ø)
22
Panel installation
a
24.1
- 0
+0.5
b
3.2
- 0
+0.2
1. Place the operation unit through
panel mounting hole.
2.
Install the nut by using tightening
tool.
3.
Make sure the operation unit fix
on the panel firmly.
5-3. Operation unit and contact unit installation
1. Fix the operation unit on the
panel.
2.
Connect the operation unit with
snap-fit joint part of contact unit.
3.
Rotate contact unit to fix firmly
as shown in the left figure.
(60431)2016.06.08
EXCEL CELL ELECTRONIC CO., LTD.
S PE CI F I CAT I O N
5-4. LED lamp installation
NO.
Edition
2
A31227
Page
5
1. Aim LED lamp to the lamp holder and
press down to the bottom.
2. Rotate the LED lamp to make sure the
lamp is firmly installed.
3. While installation and removal, please
hold the metal part of LED lamp to
avoid damaging LED lamp.
1.
2.
When using DC LED lamp, please
connect the positive pole (+) to X1
terminal as shown in left figure.
The LED lamp may be erroneously
lightened by a leaking current from
the circuit. The malfunction can be
prevented by connecting a shunt
resistor in parallel with the LED lamp.
6. PACKAGING
6-1 . ECS product is packed without assembly (packed by set), 10 sets per box.
6-2 . Label information
(1) part number
(6) QC inspection stamp
(2) Lot number
(7) Company mark
(3) Quantity
(8) Company name
(4) Tester number
(9) Notice
(5) Date code
7. DIMENSIONS
7-1. See attached drawings
8. OPTIONS
8-1. Key recess type operation unit is available (22mm only)
8-2. Ø22mm and Ø25mm type have the same structure. Different thickness of O-rings
can be ordered separately to fit into Ø22mm and Ø25mm hole in the panel.
8-3. LED Specification
LED Type
Durability(reference)
Voltage
BA9S-T8
Approx. 50,000 Hrs.
Printed on the LED
8-4. For other accessories (name plate, control box, and etc.), please refer to
accessory part in the catalog.
(60431)2016.06.08
DSP 与 ARM 处理器
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
