Through Hole Lamp
Product Data Sheet
LTL-1BEHJ
Spec No.: DS-20-95-0195
Effective Date: 07/21/2012
Revision: F
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Features
* Lead (Pb) free product and RoHS compliant.
* Red Orange and green chips are matched for uniform light output.
* Long life-solid state reliability.
* Low power consumption.
* I.C. compatible.
* 3.1mm Diameter package
Package Dimensions
Part No.
LTL-1BEHJ
Lens
White Diffused
Source Color
Red Orange / Green
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is 0.25mm(.010") unless otherwise noted.
3. Protruded resin under flange is 1.0mm(.04") max.
4. Lead spacing is measured where the leads emerge from the package.
5. Specification are subject to change without notice.
Part No. : LTL-1BEHJ
BNS-OD-C131/A4
Page :
1
of
10
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Absolute Maximum Ratings at T
A
=25
Parameter
Power Dissipation
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
Continuous Forward Current
Derating Linear From 50
Operating Temperature Range
Storage Temperature Range
Lead Soldering Temperature
[2 mm (.08") From Body]
260
Red Orange
100
120
30
0.4
-55
-55
Green
100
120
30
0.4
to + 100
to + 100
Unit
mW
mA
mA
mA/
for 5 Seconds Max
Part No. : LTL-1BEHJ
BNS-OD-C131/A4
Page :
2
of
10
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Electrical Optical Characteristics at T
A
=25
Parameter
Luminous Intensity
Viewing Angle
2
Symbol
I
V
Color
Red Orange
Green
Red Orange
Green
Red Orange
Green
Red Orange
Green
Red Orange
Green
V
F
Red Orange
Green
Red Orange
Green
615
565
Min. Typ. Max.
12.6
12.6
19
19
75
75
630
565
625
573
40
30
2.0
2.1
2.6
2.6
100
632
578
100
100
Unit
mcd
deg
Test Condition
I
F
= 20mA
Note 1,4
Note 2 (Fig.6)
Measurement
@Peak (Fig.1)
Note 3
1/2
Peak Emission Wavelength
Dominant Wavelength
Spectral Line Half-Width
Forward Voltage
p
d
nm
nm
nm
V
A
I
F
= 20mA
Note 5
V
R
= 5V
Reverse Current
I
R
Note: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE
(Commission International De L'Eclairage) eye-response curve.
2.
1/2
is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
d
3. The dominant wavelength,
is derived from the CIE chromaticity diagram and represents the single
wavelength which defines the color of the device.
4. The Iv guarantee should be added 15% .
5. Reverse Voltage (V
R
) condition is applied for IR test only. The device is not designed for reverse operation.
Part No. : LTL-1BEHJ
BNS-OD-C131/A4
Page :
3
of
10
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Typical Electrical / Optical Characteristics Curves
(25
Ambient Temperature Unless Otherwise Noted)
Part No. : LTL-1BEHJ
BNS-OD-C131/A
Page :
4
of
10
详细参数
全文预览
51单片机
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
